MSI-AMI bios mod requests, post here. Previous requests

[jazztractor]

Hi guys...on the right forum now I hope. I have MSI mainboard and tried an SLIC_ASUS flash but no success - here are the details as requested:

-Motherboard Manufacturer: MSI
-Model: K8MM-V
-Bios revision: 1.A
-VISTA:Not Activated
-911medic
-Modded BIOS link: http://slics.myftp.org/MSI_7142v1A_ASUS.rar
-Observations: System boots fine after flash and OEM_SLP channel is picked up after re installing license file, however - still on grace period of 30 days and no activation.

[jazztractor]

Hi - have just corrected my previous post with correct modded BIOS link

[Dyasan]

MSI SLIC = http://slics.myftp.org/7235v38MSI_SLIC.rar

Flash with AFUDOS from DOS. No switches. clear cmos and load defaults after flash..

Great! It's works. Thanks! :)

[jazztractor]

Hi guys...on the right forum now I hope. I have MSI mainboard and tried an SLIC_ASUS flash but no success - here are the details as requested:

-Motherboard Manufacturer: MSI
-Model: K8MM-V
-Bios revision: 1.A
-VISTA:Not Activated
-911medic
-Modded BIOS link: http://slics.myftp.org/MSI_7142v1A_ASUS.rar
-Observations: System boots fine after flash and OEM_SLP channel is picked up after re installing license file, however - still on grace period of 30 days and no activation.

Just to let you guys know - I found another Mod by 'Fzeven' from this forum which worked perfectly for this board MSI K8MM-V:

http://forums.mydigitallife.info/showthread.php?t=525&highlight=dell+computer&page=74

And here is link to Modded BIOS:

Try this, slp1.0 = HP slp2.0 = Asus, appreciate you're feedback.

http://www.box.net/shared/4l5pxfxk4s


Thank you all very much for your time:D

[GraceSlic]

And what about this???

K8MM-V - Ver. 1.7: Award
SLIC = ASUS (Cert Included) mod petar, tested nattyd
http://rapidshare.com/files/124723928/7142v17.zip
WFL859G.EXE W7142vms.170 /py /sn /cc /cd /LD /R

see the thread All Slics...


Just to let you guys know - I found another Mod by 'Fzeven' from this forum which worked perfectly for this board MSI K8MM-V:

http://forums.mydigitallife.info/showthread.php?t=525&highlight=dell+computer&page=74

And here is link to Modded BIOS:




Thank you all very much for your time:D

[dusk]

Please mod this BIOS for me, because the newest modded BIOS available is 1.9.

Mainboard: MSI P35 Platinum v1.1
BIOS Version: 1.10
BIOS Type: AMI
BIOS Link: http://download1.msi.com.tw/files/downloads/bos_exe/7345v1A.zip
OS: Windows Vista Ultimate x64 SP1

Thanks in advance.

Yes, me too please.
I am working with Yen's excellent modded 1.9 bios, and would really appreciate if he could work his magic on this new 1.10 version.
Mainboard: MSI P35 Platinum
OS: Triple Boot: Win XP Pro sp3, Win Vista Ultimate x86 sp1, Win Vista Ultimate x64 SP1

[dusk]

Originally Posted by anykeyer
Hi Yen,
thanks again for your previous mod!

Can i ask for a mod of newly released P35 Neo2/Platinum/G33 Platinum BIOS v1.10 with MSI SLIC?

original bios - http://global.msi.com.tw/index.php?f...8655&type=bios

Thanks again!


Originally Posted by coolioo View Post
Hi Yen,

I need that too. Direct link for the official bios file: http://download1.msi.com.tw/files/do...xe/7345v1A.zip


I'm no Yen, but this will probably work....:D:D

http://www.fileden.com/files/2008/8/13/2048424/7345v1AMSI_SLIC.rar

Flash from DOS with AFUDOS, no switches..

Sorry 911medic,
I've just reread all 25 pages of this forum and realised that you had done this mod for Yen already,
didn't mean to be rude and disregard your work.
Have downloaded yours and will try it soon, thanks

[Dyasan]

- Motherboard Manufacturer And Model : MSI K9A2 Platinum (MS-7376)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7376v16.zip

Please,need your help.

[911medic]

- Motherboard Manufacturer And Model : MSI K9A2 Platinum (MS-7376)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7376v16.zip

Please,need your help.

MSI SLIC = http://slics.myftp.org/7376v16_MSI_SLIC.rar

Flash as usual..Enjoy:D:D

[shortbus]

- Motherboard Manufacturer And Model : MSI G31M3-F
- Bios Revision : 3.4
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7528v34.zip

Thanks for your help!

[911medic]

- Motherboard Manufacturer and Model = MSI P35 Neo - F
- Bios revision = 1.9
- Bios SLIC = ASUS_NOTEBOOK
- Bios: AMI
- Bios Link: http://www.msi-technology.de/downloads/bos_exe/7360v19.zip

your help will be appreciated :)
Thx a lot!

ASUS SLIC = http://slics.myftp.org/7360v19_ASUS_MSI.rar

Flash from DOS with AFUDOS..NO switches. clear cmos and load defaults post flash...

[911medic]

- Motherboard Manufacturer And Model : MSI G31M3-F
- Bios Revision : 3.4
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7528v34.zip

Thanks for your help!
DELL SLIC = http://slics.myftp.org/7528v34_MSI_DELL_SLIC.rar
Flash from DOS with AFUDOS..NO switches. clear cmos and load defaults..

feedback please///

[Ashaman]

Quote:
Originally Posted by Ashaman View Post
- Motherboard Manufacturer and Model = MSI P35 Neo - F
- Bios revision = 1.9
- Bios SLIC = ASUS_NOTEBOOK
- Bios: AMI
- Bios Link: http://www.msi-technology.de/downloa...xe/7360v19.zip

your help will be appreciated
Thx a lot!
ASUS SLIC = http://slics.myftp.org/7360v19_ASUS_MSI.rar


confirmed and thank you again :)

[igloo]

Please mod this BIOS for me

Mainboard: MSI P35 Platinum v1.1
BIOS Version: 1.10
BIOS Type: AMI
BIOS Link: http://download1.msi.com.tw/files/do...xe/7345v1A.zip
BIOS Slic: HP
OS: Windows Vista Ultimate x64 SP1/ windows xp

Thanks in advance.

[911medic]

Please mod this BIOS for me

Mainboard: MSI P35 Platinum v1.1
BIOS Version: 1.10
BIOS Type: AMI
BIOS Link: http://download1.msi.com.tw/files/do...xe/7345v1A.zip
BIOS Slic: HP
OS: Windows Vista Ultimate x64 SP1/ windows xp

Thanks in advance.

HP SLIC/SLP1 = http://slics.myftp.org/7345v1AMSI_HP_SLIC_SLP.rar

Flash from DOS with AFUDOS. No switches. Feedback please!!:D

[igloo]

HP SLIC/SLP1 = http://slics.myftp.org/7345v1AMSI_HP_SLIC_SLP.rar

Flash from DOS with AFUDOS. No switches. Feedback please!!:D

Flashed the bios and activated HP OEM XP without a glitch! I don't have a HP Vista yet but I am sure it will work too. Thank you very much. You are the MAN!

[911medic]

Flashed the bios and activated HP OEM XP without a glitch! I don't have a HP Vista yet but I am sure it will work too. Thank you very much. You are the MAN!
I am glad it worked for you..Thanks for the feedback..

Any vista works..just add the certs and serial.:D:D Good luck!!!1

[andreim4]

Motherboard: unknown msi ex720 notebook
BIOS Version: a1723ims v1.04
Bios Type : AMI
Bios Link: http://global.msi.com.tw/index.php?f...5&prod_no=1669
SLIC : MSI_NB

thanks in advance

[911medic]

Motherboard: unknown msi ex720 notebook
BIOS Version: a1723ims v1.04
Bios Type : AMI
Bios Link: http://global.msi.com.tw/index.php?f...5&prod_no=1669
SLIC : MSI_NB

thanks in advance

MSI SLIC = http://slics.myftp.org/A1723IMS.105_MSI_SLIC.rar

Flash from DOS with AFUxxx included. No switches.

Clear cmos and load defaults..

Sorry so long, I am on shift...This is a break:D:D

Feedback please!!!

[andreim4]

MSI SLIC = http://slics.myftp.org/A1723IMS.105_MSI_SLIC.rar

Flash from DOS with AFUxxx included. No switches.

Clear cmos and load defaults..

Sorry so long, I am on shift...This is a break:D:D

Feedback please!!!


i runned the bios update and it started. now i'm in vista and i don't know what crack i should run. all i runned sow far ended un in reinstalling vista because it stoped booting after restart

i saw with everest that in acpi menu that the SLIC value it's steel msi.
ithought the hole ideea of the bios update was to remove that. please help me cause i'm getting king of despreate. this is the 3-rd day in wich i'm trying to activate vista and i tryied with a lot of cracks

[zort]

i runned the bios update and it started. now i'm in vista and i don't know what crack i should run. all i runned sow far ended un in reinstalling vista because it stoped booting after restart

i saw with everest that in acpi menu that the SLIC value it's steel msi.
ithought the hole ideea of the bios update was to remove that. please help me cause i'm getting king of despreate. this is the 3-rd day in wich i'm trying to activate vista and i tryied with a lot of cracks

Bootloaders will replace the SLIC in the BIOS. If you've installed one you'll need to remove it in order for the modded BIOS to work. If you have, then this utility may help remove it. If you haven't installed one you can skip this step.
http://forums.mydigitallife.info/showpost.php?p=7720&postcount=3

Download this file:
http://rapidshare.com/files/118119842/39-CERTS.zip

Copy MSI.xrm-ms to C:\

Open a command prompt (run as administrator if UAC is enabled) and type this command:
slmgr.vbs -ilc C:\MSI.xrm-ms

[pompom]

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519-020R)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7519v16.zip

Thanks for your help

[911medic]

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519-020R)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7519v16.zip

Thanks for your help
DELL SLIC = http://slics.myftp.org/7519v16_DELL.rar

Flash from DOS with AFUDOS..No switches..clear cmos and load defaults.

Feedback please..:D:D

[pompom]

DELL SLIC = http://slics.myftp.org/7519v16_DELL.rar

Flash from DOS with AFUDOS..No switches..clear cmos and load defaults.

Feedback please..:D:D

It's works. Thanks! :D:D

[911medic]

It's works. Thanks! :D:D

Thanks for the feedback..Happy to help!!

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519-020R)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://slics.myftp.org/7519v16_DELL.rar

[Killone]

Hello there my question is

I have a ASUS P5Q-E Mainboard can i patch it the board simply whit the Easy Auto Method or is this not the right program for my bios.

Here the bios file

Asus P5Q-E BIOS 1406

http://support.asus.com/download/download.aspx?SLanguage=de-de

When anyone can help me.

Thanks a lot.

[GraceSlic]

Sorry but what is the name of this thread????

For your request is a another thread please use that.

Thanks
GraceSlic

Hello there my question is

I have a ASUS P5Q-E Mainboard can i patch it the board simply whit the Easy Auto Method or is this not the right program for my bios.

Here the bios file

Asus P5Q-E BIOS 1406

http://support.asus.com/download/download.aspx?SLanguage=de-de

When anyone can help me.

Thanks a lot.

[Killone]

Oh sorry MSI i dont see it sorry for the false post.

[BlueCity]

Hello,

could anyone help me with this new Motherboard:

Motherboard Manufacter And Model: MSI P7NGM-Digital
Bios Typ: AMI BIOS
Bios Version: 1.1
Bios Link: http://download1.msi.com.tw/files/do...xe/7530v11.zip

Thanks in advance

BlueCity

[911medic]

Hello,

could anyone help me with this new Motherboard:

Motherboard Manufacter And Model: MSI P7NGM-Digital
Bios Typ: AMI BIOS
Bios Version: 1.1
Bios Link: http://download1.msi.com.tw/files/do...xe/7530v11.zip

Thanks in advance

BlueCity

MSI SLIC = http://slics.myftp.org/7530v11MSI_SLIC_CERT.rar
Flash from DOS with AFUDOS. No switches..clear cmos an load defaults

Cert included.

[BlueCity]

Flash from DOS with AFUDOS. No switches..clear cmos an load defaults

Cert included.

"No switches" - You mean switch off the PC directly after flashing, then CMOS Clear, then setup defaults?

[911medic]

"No switches" - You mean switch off the PC directly after flashing, then CMOS Clear, then setup defaults?

No......I mean to flash like AFUDOS /iBIOSNAME.ROM

NOT.....AFUDOS /iBIOSNAME.ROM /pbnc /n

These are the switches..

You still need to clear cmos and load defaults..

[Killone]

Ok i resolve thanks YEN for help ;)

[zort]

WickedNick's detailed explanation of AMI module header:
http://forums.mydigitallife.info/showpost.php?p=37664&postcount=94

Example of headers using A7345IMSorg.180 from Yen's SSV2 guide:
(earlier post http://forums.mydigitallife.info/showpost.php?p=22879&postcount=38)

MMTool-1b
RomLoc: 1C
Source size: 60B20
Size in Rom: 30110 (14h + 300FC)

MMTool-PCI Option rom
RomLoc: 3012C
Source size: A800
Size in Rom: 608C (14h + 6076h + 2 following FF, counts toward MMTool size)


1B header @ 8-1Bh (14h)

FC 00 03 00 = 1B compressed size (300FC)
8A 4E 0E 61 = checksum
10 00 9C 80 = pointer
FF FF 1B 00 = FF FF module size, 1B module type, 00 compressed
00 00 00 00 = target offset

Beginning of 1B @ 1C-30117h (300FC)

FC 00 03 00 = size of 1B compressed (300FC)
20 0B 06 00 = size of 1B uncompressed size (60B20)
...

PCI ROM header @ 30118-3012B (14h)

78 60 00 00 size of compressed PCI ROM (6076h + 2 FF)
92 54 3B A7 checksum
0C 00 1A 36 pointer
78 60 20 00 size of compressed rom (6078h), 20 module type, 00 compressed
EC 10 68 81 target offset


Beginning of PCI ROM @ 3012C-361A1 (6076h)

76 60 00 00 size of compressed PCI ROM (real size)
00 A8 00 00 size of uncompressed PCI ROM


As you can see from the PCI ROM above, some modules are padded with 1-3 FF's after the module, probably to make the module size divisible by 4. MMTool and the 14h header include these FF bytes in the calculated size. However if you export the commpressed module from MMTool you'll get just the actual module. So when MMTool says your new compressed 1B is the same size, sometimes you may find it is actually a byte or two bigger or smaller with a differing number of FF's following the module in the BIOS. (Keep this in mind if you use the exported compressed 1B file to copy into the new BIOS as opposed to copying the whole block from the one BIOS to another like in the guide.)

Additional info about the CRC:

Manual method of calculating AMI checksum
http://forums.mydigitallife.info/showpost.php?p=37455&postcount=84

WickedNick's SUM32 utility for calculating the checksum:
http://forums.mydigitallife.info/showpost.php?p=37665&postcount=95
Usage: run on file consisting of header+module. Replace checksum bytes in header with zeroes before running.

[avsh7]

HI again! Please make mod:
1. MSI P45 Neo2
2. Bios Revision 3.3
3. Bios Type AMI BIOS
4. Bios Slic MSI
5. http://download1.msi.com.tw/files/downloads/bos_exe/7512v33.zip

Thanks for your help!

[andyp]

Hi All,

I have been reading here, playing with ACPITool and WinHex looking at SSV2 mods. I have written a little tool - http://drop.io/slictool2.

** Please note this is an early beta **
** Works means the binary output looks OK - I don't own these boards in question **

I would value feedback and have a couple of specific questions regarding parsing a ROM image. I enclose 4 samples in the archive.

1) 180.ROM - an MSI ROM (the one yen originally used). Has 8 bytes of FFh then the first module header. All subsequent module headers can be found from the 3rd DWORD in the table. This works OK. Try it! :)

2) 1201.ROM - an asus p5k rom. Has 16 byte ASUS header then 12 bytes of FFh then first module header. All subsequent module headers can be found from the 3rd DWORD in the table. This works OK.

- I search for the first header by looking for at least 4xFFh then presuming the first non FFh byte is the first byte of the first module header... HOWEVER.

3) 1604.ROM - an asus P5B rom. Has some odd ASUS FC module header then lots of FFh and the ASUSTEK string is a long way in......... fails.

4) 330.ROM - an MSI rom. Has 12 bytes of FFh then the first module header HOWEVER All subsequent module headers can NOT be found from the 3rd DWORD in the table - points randomly.... fails.

What on earth am I missing. MMTool reads them all OK. What generic rules are there for parsing a ROM image to traverse all the modules...... I am tearing my hair out! :confused: (I tried doing it by just adding the module size to the offset but this missed modules in both the first two ROMs).

Otherwise program features
SSV3 (automated with AMIMMWIN or with MMTOOL prompts)
SSV2 - will find space in ROM, correct SLIC checksum, patch 1B and modify OEM/Table ID then Creator ID to correct size. Reintegrate and correct module checksum.

Final question

5) Where in the ROM image do you find the ROM checksum (the one Yen suggests chaning the last byte of SLIC from FF to 89 to correct) and how is it calculated - (is it a sum like the modules - i assume it is if one byte change corrects - or CRC32 or something else).

Also value thoughts and feedback. :D

Cheers,
Andy

[911medic]

HI again! Please make mod:
1. MSI P45 Neo2
2. Bios Revision 3.3
3. Bios Type AMI BIOS
4. Bios Slic MSI
5. http://download1.msi.com.tw/files/downloads/bos_exe/7512v33.zip

Thanks for your help!

MSI SLIC = http://slics.myftp.org/7512v33_MSI_SLIC.rar
Flash with AFUDOS. No switches, from DOS..clear cmos and load defaults...


:D:D

[zort]

I would see if you can make your utility use the output from AMIMMWIN.exe for module locations.

I don't know about the checksum locations for the whole bios, but I think this is the reasoning for the part about the SLIC:

375 FF bytes sum to 89. The 374 byte slic sums to 0. Changing the following FF byte to 89 negates the change caused by adding the SLIC.

[p4spooky]

Motherboard Manufacturer And Model : MSI K9A2 Platinum (MS-7376)
- Bios Revision : 1.73 (BETA)
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://www.box.net/shared/ab6x5cvhut

911Medic/Other experts need your help with this ssv2 mod! :eek:

Will provide feedback :cool:

[911medic]

Motherboard Manufacturer And Model : MSI K9A2 Platinum (MS-7376)
- Bios Revision : 1.73 (BETA)
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://www.box.net/shared/ab6x5cvhut

911Medic/Other experts need your help with this ssv2 mod! :eek:

Will provide feedback :cool:

ASUS SLIC = http://slics.myftp.org/A7376AMS.173_ASUS_SLIC.rar

Flash with AFUDOS..NO SWITCHES!!

Clear cmos and load defaults after flash...Enjoy the Beta :D:D

[Yen]

Hi All,

I have been reading here, playing with ACPITool and WinHex looking at SSV2 mods. I have written a little tool - http://drop.io/slictool2.

I would value feedback and have a couple of specific questions regarding parsing a ROM image. I enclose 4 samples in the archive.

1) 180.ROM - an MSI ROM (the one yen originally used). Has 8 bytes of FFh then the first module header. All subsequent module headers can be found from the 3rd DWORD in the table. This works OK. Try it! :)

2) 1201.ROM - an asus p5k rom. Has 16 byte ASUS header then 12 bytes of FFh then first module header. All subsequent module headers can be found from the 3rd DWORD in the table. This works OK.

- I search for the first header by looking for at least 4xFFh then presuming the first non FFh byte is the first byte of the first module header... HOWEVER.

3) 1604.ROM - an asus P5B rom. Has some odd ASUS FC module header then lots of FFh and the ASUSTEK string is a long way in......... fails.

4) 330.ROM - an MSI rom. Has 12 bytes of FFh then the first module header HOWEVER All subsequent module headers can NOT be found from the 3rd DWORD in the table - points randomly.... fails.

What on earth am I missing. MMTool reads them all OK. What generic rules are there for parsing a ROM image to traverse all the modules...... I am tearing my hair out! :confused: (I tried doing it by just adding the module size to the offset but this missed modules in both the first two ROMs).

Otherwise program features
SSV3 (automated with AMIMMWIN or with MMTOOL prompts)
SSV2 - will find space in ROM, correct SLIC checksum, patch 1B and modify OEM/Table ID then Creator ID to correct size. Reintegrate and correct module checksum.

Final question

5) Where in the ROM image do you find the ROM checksum (the one Yen suggests chaning the last byte of SLIC from FF to 89 to correct) and how is it calculated - (is it a sum like the modules - i assume it is if one byte change corrects - or CRC32 or something else).

Also value thoughts and feedback. :D

Cheers,
Andy

I'm not able to download from here........I'll have a look next time.
The explanation of Zort about to add '89h' is perfect. It just remains the 8 bit checksum of the biosfile, nothing more.

Have a look at module 80h, it's the infomodule. MMtool uses it to read out the module structure.
Why do you want to locate each module by yourself? Just use amimmwin /info. To search for the 1b (header) would be enough.
How would you make your code to remain the original compressed size of the modified 1b module??

[האח_הגדול]

hi i'm new here and i wanna mod my bios

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI vista ultimate and XP pro
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8764&type=bios

i was trying to mod my bios with the automatic tool but after the restart nothing is working and i have to do recovery from floppy

now i'm working with original 1.7 and there is no slic inside the original and i cant downgrade to 1.6 (black screen)

please help me

edit: i need matching cert and mathing key for windows visra ultimate where i get this stuff

[911medic]

hi i'm new here and i wanna mod my bios

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI vista ultimate and XP pro
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8764&type=bios

i was trying to mod my bios with the automatic tool but after the restart nothing is working and i have to do recovery from floppy

now i'm working with original 1.7 and there is no slic inside the original and i cant downgrade to 1.6 (black screen)

please help me

edit: i need matching cert and mathing key for windows visra ultimate where i get this stuff

certs and stuff here >>http://rapidshare.com/files/118119842/39-CERTS.zip

Any second choice for the xp slp1?? MSI is a problem to insert sometimes..Maybe HP, ASUS, DELL for xp..the MSI for vista is no problem...:D

Keep in mind, I am still working on inserting the MSI slp1 strings..Maybe be a few...How long do you have??

[האח_הגדול]

certs and stuff here >>http://rapidshare.com/files/118119842/39-CERTS.zip

Any second choice for the xp slp1?? MSI is a problem to insert sometimes..Maybe HP, ASUS, DELL for xp..the MSI for vista is no problem...:D

Keep in mind, I am still working on inserting the MSI slp1 strings..Maybe be a few...How long do you have??

but i have MSI motherboad
how you can insert other brand to this motherboard?
it will activate ok?

if yes insert what ever slic do you want but please insert the same brand to the slp1 and 2

[911medic]

but i have MSI motherboad
how you can insert other brand to this motherboard?
it will activate ok?

if yes insert what ever slic do you want but please insert the same brand to the slp1 and 2
We can insert any brand slic and slp we have available, and they will activate accordingly. MSI makes boards for HP, Gateway, etc...They activate??

It will be fine. How about HP. I will send the oembios files and cert..

Do you know how to activate the OS? The board and Bios are just one piece..

[האח_הגדול]

We can insert any brand slic and slp we have available, and they will activate accordingly. MSI makes boards for HP, Gateway, etc...They activate??

It will be fine. How about HP. I will send the oembios files and cert..

Do you know how to activate the OS? The board and Bios are just one piece..

hp sound funny (i have MSI motherboard with hp slic :D )

made for me hp slic please

i read the info in this post:
http://forums.mydigitallife.info/showthread.php?t=283
how hard it's can be?? (except the creepy flash procedure :eek: )

edit: i have 3 same computer's with the same hardware (ms-7519 mobo, 250GB hdd, 2GB ram, geforce9600gt palit, dvd-writer LG, e2180 CPU),
i heard that it's better to flash from floppy but i have only floppy usb,
it's safe to boot and flash from usb floppy???

[911medic]

hp sound funny (i have MSI motherboard with hp slic :D )

made for me hp slic please

i read the info in this post:
http://forums.mydigitallife.info/showthread.php?t=283
how hard it's can be?? (except the creepy flash procedure :eek: )

edit: i have 3 same computer's with the same hardware (ms-7519 mobo, 250GB hdd, 2GB ram, geforce9600gt palit, dvd-writer LG, e2180 CPU),
i heard that it's better to flash from floppy but i have only floppy usb,
it's safe to boot and flash from usb floppy???

HP SLIC SLP = http://slics.myftp.org/MSI7519v17_HP_SLIC_SLP1_.rar

Flash from DOS with the AFUDOS included. No switches..
AFUDOS /IA7519IMS.170

Clear cmos and load defaults after flash ..
You can boot from usb floppy, or make a bootable usb drive and boot from that. put the files to it and follow directions. DO NOT use the switches in the instructions..

If you need OEMBIOS files for the xp..the correct ones are here>>http://www.fileden.com/files/2008/8/13/2048424/program/HP.rar

find serial for the xp in the winsif file in oembios file..this is the one to use, not the online one..

[andyp]

I'm not able to download from here........I'll have a look next time.
The explanation of Zort about to add '89h' is perfect. It just remains the 8 bit checksum of the biosfile, nothing more.

Have a look at module 80h, it's the infomodule. MMtool uses it to read out the module structure.
Why do you want to locate each module by yourself? Just use amimmwin /info. To search for the 1b (header) would be enough.
How would you make your code to remain the original compressed size of the modified 1b module??

Hi

I have improved. http://drop.io/slictool2

** Please bear in mind this tool is still beta. It is really written for curiosity but hopefully will be useful in the future **

I would value input from the regular modders to see if the binary output looks anything like what you would do manually. It creates 1B.BIN (the original 1B module), 1B_SLIC.BIN (the updated 1B module) and <BIOS>_SLIC.ROM the SLICd BIOS.

It performs SSV2 and 3 (with the option of 3 being automated or with a manual MMTool step at the end).

It now parses the entire file looking for valid headers. It gets the right size doing exactly what you said to do :p - it recurses through the tables first replacing the OEM/Table ID then the Creator ID. If that isn't enough it then sequentally replaces 4 byes of the copyright string at a time.

Value feedback as it should make this process much easier. (Note it currently needs amimmwin in the same path as the bios file and slic file)

Cheers,
Andy

PS - question on ROM file checksum. I can (and the prog does) module and SLIC checksums fine. Playing around with the ROM file the checksum seems to be 4 bytes after $BCS. If seems to be a simple sum (negated). I note MMTool stores the time of last change in hex format at the end - and a +/- 1 here is reflected by at -/+ 1 in the respective byte of the dword checksum. However changing ASUSTEK at offset 0 to BSUSTEK does not change the checksum. I have written a routine to recurse every 4 byte boundry from the start and calculate then checksum from there but have had no luck. Any ideas from where it starts (it's not the first valid header either) or is there anything else vital I am missing.

[911medic]

Hi

I have improved. http://drop.io/slictool2

** Please bear in mind this tool is still beta. It is really written for curiosity but hopefully will be useful in the future **

I would value input from the regular modders to see if the binary output looks anything like what you would do manually. It creates 1B.BIN (the original 1B module), 1B_SLIC.BIN (the updated 1B module) and <BIOS>_SLIC.ROM the SLICd BIOS.

It performs SSV2 and 3 (with the option of 3 being automated or with a manual MMTool step at the end).

It now parses the entire file looking for valid headers. It gets the right size doing exactly what you said to do :p - it recurses through the tables first replacing the OEM/Table ID then the Creator ID. If that isn't enough it then sequentally replaces 4 byes of the copyright string at a time.

Value feedback as it should make this process much easier. (Note it currently needs amimmwin in the same path as the bios file and slic file)

Cheers,
Andy

PS - question on ROM file checksum. I can (and the prog does) module and SLIC checksums fine. Playing around with the ROM file the checksum seems to be 4 bytes after $BCS. If seems to be a simple sum (negated). I note MMTool stores the time of last change in hex format at the end - and a +/- 1 here is reflected by at -/+ 1 in the respective byte of the dword checksum. However changing ASUSTEK at offset 0 to BSUSTEK does not change the checksum. I have written a routine to recurse every 4 byte boundry from the start and calculate then checksum from there but have had no luck. Any ideas from where it starts (it's not the first valid header either) or is there anything else vital I am missing.

Very impressive..I have looked at the tool with a couple of bios and it appears to produce valid mods. I would have altered the text after the AMIBIOS 0800 string in my mod, and this allows for additional slp string. I think that for a mass prod. tool, this could work. I have not had much luck with the auto tools so far..I guess I am jaded a bit, but this would be interesting to see tested..

Other than the removal of MSFT string for 1b size, I think it is similar to how I would have modded by manual..

Good Job with this...:D:D I will look at it further with time, I am sure...

edit: Could the tool search for open FF bytes after 50000h. I was under the impression that before this would not work..Just curious..

[p4spooky]

Hi

I have improved. http://drop.io/slictool2

** Please bear in mind this tool is still beta. It is really written for curiosity but hopefully will be useful in the future **

I would value input from the regular modders to see if the binary output looks anything like what you would do manually. It creates 1B.BIN (the original 1B module), 1B_SLIC.BIN (the updated 1B module) and <BIOS>_SLIC.ROM the SLICd BIOS.

It performs SSV2 and 3 (with the option of 3 being automated or with a manual MMTool step at the end).

It now parses the entire file looking for valid headers. It gets the right size doing exactly what you said to do :p - it recurses through the tables first replacing the OEM/Table ID then the Creator ID. If that isn't enough it then sequentally replaces 4 byes of the copyright string at a time.

Value feedback as it should make this process much easier. (Note it currently needs amimmwin in the same path as the bios file and slic file)

Cheers,
Andy

PS - question on ROM file checksum. I can (and the prog does) module and SLIC checksums fine. Playing around with the ROM file the checksum seems to be 4 bytes after $BCS. If seems to be a simple sum (negated). I note MMTool stores the time of last change in hex format at the end - and a +/- 1 here is reflected by at -/+ 1 in the respective byte of the dword checksum. However changing ASUSTEK at offset 0 to BSUSTEK does not change the checksum. I have written a routine to recurse every 4 byte boundry from the start and calculate then checksum from there but have had no luck. Any ideas from where it starts (it's not the first valid header either) or is there anything else vital I am missing.

Brilliant Job - WOW. I am in learning mode and this is amazing. I am comparing the SSV2 that 911Medic did for me on the K9A2 Platinum 1.73 Bios to this tool and it is almost exact (when I compare the 1B_SLIC.ROM to what is in the modified bios). I am getting ready to flash the manual mod which I will try then do one with this tool and try that also :rolleyes:

However, I am getting an Arithmetic Error when doing a SSV2 mod on this Bios: http://www.box.net/shared/ab6x5cvhut

This is a MSI bios for K9A2 Platinum board. Can you please check this out why the tool is failing? From the log file it looks like it fails right before it creates the SLIC file. It is able to write the IB_SLIC.BIN sussessfully.

[911medic]

Brilliant Job - WOW. I am in learning mode and this is amazing. I am comparing the SSV2 that 911Medic did for me on the K9A2 Platinum 1.73 Bios to this tool and it is almost exact. I am getting ready to flash the manual mod which I will try then do one with this tool and try that also :rolleyes:

Wish me luck - the board offers no way to recover and the bios chip is soldered on the board :eek:
Flash without the switches and this may afford the AMIBOOT recover. Do not flash bootblock..

[911medic]

Brilliant Job - WOW. I am in learning mode and this is amazing. I am comparing the SSV2 that 911Medic did for me on the K9A2 Platinum 1.73 Bios to this tool and it is almost exact (when I compare the 1B_SLIC.ROM to what is in the modified bios). I am getting ready to flash the manual mod which I will try then do one with this tool and try that also :rolleyes:

However, I am getting an Arithmetic Error when doing a SSV2 mod on this Bios: http://www.box.net/shared/ab6x5cvhut

This is a MSI bios for K9A2 Platinum board. Can you please check this out why the tool is failing? From the log file it looks like it fails right before it creates the SLIC file. It is able to write the IB_SLIC.BIN sussessfully.


I have the same error..some buffer overflow. It seems it cannot resize the module enough. Although the module OEM/ID is written, the module is not resized.. Or I could be wrong..:D:D

edit: I used it on a new ASUS bios, and it worked flawlessly.There are a lot of ways to adjust the 1b size. I dont know what you can apply in your tool...

[p4spooky]

Flash without the switches and this may afford the AMIBOOT recover. Do not flash bootblock..

Will do, I know I got burnt once by the board. Will provide feedback soon :D

[Wcn001]

Thanks p4spooky(for uploading and requesting new beta) and 911medic(for the mod) the K9A2 Platinum 1.73 Bios activates fine and runs great.
I've been running it since the modded version was uploaded. :)

[911medic]

Thanks p4spooky(for uploading and requesting new beta) and 911medic(for the mod) the K9A2 Platinum 1.73 Bios activates fine and runs great.
I've been running it since the modded version was uploaded. :)

Your very welcome..I'm sure he will like to hear it works!!:D

Thanks for the feedback!!

[p4spooky]

Your very welcome..I'm sure he will like to hear it works!!:D

Thanks for the feedback!!

He beat me to it! - I just installed Vista x64 and activated NO ISSUES :D

K9A2 Platinum 1.73 Beta activates perfectly - Once again you are the man 911Medic :D

[האח_הגדול]

HP SLIC SLP = http://slics.myftp.org/MSI7519v17_HP_SLIC_SLP1_.rar

Flash from DOS with the AFUDOS included. No switches..
AFUDOS /IA7519IMS.170

Clear cmos and load defaults after flash ..
You can boot from usb floppy, or make a bootable usb drive and boot from that. put the files to it and follow directions. DO NOT use the switches in the instructions..

If you need OEMBIOS files for the xp..the correct ones are here>>http://www.fileden.com/files/2008/8/13/2048424/program/HP.rar

find serial for the xp in the winsif file in oembios file..this is the one to use, not the online one..

vista ultimate x64 and x32 is activated

about xp i will make the cd with the oem file's and when it will be ready i will post

thank you very much for your great work and sorry for being annoying

edit: 2 computer's (one with vista 32 and the other with vista 64) was activated good but the last computer is dead,
all the recovery option's is not working anymore,
this is strange for me because i have the same motherboard in all the 3 computer's even the REV is the same

really weird

[andyp]

Brilliant Job - WOW. I am in learning mode and this is amazing. I am comparing the SSV2 that 911Medic did for me on the K9A2 Platinum 1.73 Bios to this tool and it is almost exact (when I compare the 1B_SLIC.ROM to what is in the modified bios). I am getting ready to flash the manual mod which I will try then do one with this tool and try that also :rolleyes:

However, I am getting an Arithmetic Error when doing a SSV2 mod on this Bios: http://www.box.net/shared/ab6x5cvhut

This is a MSI bios for K9A2 Platinum board. Can you please check this out why the tool is failing? From the log file it looks like it fails right before it creates the SLIC file. It is able to write the IB_SLIC.BIN sussessfully.

Fixed. Same address. There was a undershoot in the size (which if you use unsigned ints throws an error! duh!). Should work now.

Keep 'em coming. :D
Andy

[andyp]

I have the same error..some buffer overflow. It seems it cannot resize the module enough. Although the module OEM/ID is written, the module is not resized.. Or I could be wrong..:D:D

edit: I used it on a new ASUS bios, and it worked flawlessly.There are a lot of ways to adjust the 1b size. I dont know what you can apply in your tool...


What other ways would you like? ;)

Andy

[andyp]

...

edit: Could the tool search for open FF bytes after 50000h. I was under the impression that before this would not work..Just curious..

I can make it start from anywhere. I was going to ask yen as well because his post seems to suggest not after D5000 also..... Will add as an option.

Andy

[911medic]

vista ultimate x64 and x32 is activated

about xp i will make the cd with the oem file's and when it will be ready i will post

thank you very much for your great work and sorry for being annoying

edit: 2 computer's (one with vista 32 and the other with vista 64) was activated good but the last computer is dead,
all the recovery option's is not working anymore,
this is strange for me because i have the same motherboard in all the 3 computer's even the REV is the same

really weird

Hardware failure? This is a chance with bios flash..Maybe RMA??

Thanks for the feedback:D:D..Sorry about the last board...:confused:

[האח_הגדול]

Hardware failure? This is a chance with bios flash..Maybe RMA??

Thanks for the feedback:D:D..Sorry about the last board...:confused:

about the unlucky mobo:
it's ok
the computer store is in the end of my neighborhood (3 minutes and i'm there) i just tell to the seller man that the computer never turn on and now i have e new ms-7519 mobo and the flash procedure run fine and now i see hp slic in the last mobo

you can move this bios to the slic tested area

p.s. i wanna learn how to mod bios's i wanna help to other user's how to mod like you helped me, can you teach me?? if yes talk with me in PM

[p4spooky]

Fixed. Same address. There was a undershoot in the size (which if you use unsigned ints throws an error! duh!). Should work now.

Keep 'em coming. :D
Andy

Works now no issues. Will test this on a ECS board and let you know the results. Looks VERY GOOD. Great job. :)

[911medic]

Works now no issues. Will test this on a ECS board and let you know the results. Looks VERY GOOD. Great job. :)

where is the tool D/L?? Did it resize the 1b module ok? I had an error that it failed to resize the 1b module...
EDIT: Tried it again x5 (after new download) with MSI and Biostar bios, and it seems to be very nice tool.

Would it be possible to search for a SLICv table and change to SLECv. I have been doing this as to not have two slic tables..I dont even know if this is necessary.

No errors at all..Very nice work;):D:D

[p4spooky]

where is the tool D/L?? Did it resize the 1b module ok? I had an error that it failed to resize the 1b module...

Medic: Used the same link: http://drop.io/slictool2 It correctly downloads slictool3 :p updated version and it works - no errors this time :D

[avsh7]

MSI SLIC = http://slics.myftp.org/7512v33_MSI_SLIC.rar
Flash with AFUDOS. No switches, from DOS..clear cmos and load defaults...


:D:D

Great work! Vista activated! :) Thanks!

[911medic]

Great work! Vista activated! :) Thanks!

Very nice..glad to help. Thanks for the feedback!!:D:D

[andyp]

where is the tool D/L?? Did it resize the 1b module ok? I had an error that it failed to resize the 1b module...
EDIT: Tried it again x5 (after new download) with MSI and Biostar bios, and it seems to be very nice tool.

Would it be possible to search for a SLICv table and change to SLECv. I have been doing this as to not have two slic tables..I dont even know if this is necessary.

No errors at all..Very nice work;):D:D

Will do.
I have updated so a range can be specified for the SLIC insertion - http://drop.io/slictool2 (version 0.4)

Cheers
Andy

[911medic]

Will do.
I have updated so a range can be specified for the SLIC insertion - http://drop.io/slictool2 (version 0.4)

Cheers
Andy
SEE PM..Have tried on multi 512kb with no luck....

[markusof]

Originally Posted by markusof
Maker: MSI
Motherboard: K9N6PGM2-V (MS-7309)
Bios Link:http://global.msi.com.tw/index.php?f...8084&type=bios

Thanks...

[911medic]

Originally Posted by markusof
Maker: MSI
Motherboard: K9N6PGM2-V (MS-7309)
Bios Link:http://global.msi.com.tw/index.php?f...8084&type=bios

Thanks...

MSI SLIC = http://slics.myftp.org/7309v92_MSI_SLIC4.rar

Flash from DOS with AFUDOS. NO switches..Feedback please..

[markusof]

MSI SLIC = http://slics.myftp.org/7309v92_MSI_SLIC4.rar

Flash from DOS with AFUDOS. NO switches..Feedback please..

Tested - Activated....

Merry Christmas

[911medic]

Tested - Activated....

Merry Christmas

Very welcome..Thanks for the feedback!!

AndyP, I used your tool for this and checked before upload. Proof of concept, at least for 1024k bios. I still have a problem with errors at other size bios, esp. 512k.

****Be aware, I did check the mod before upload, I had no doubt as to the activation. The tool works for these bios at 1024k (to repeat):D:D

Input 50000 in the slic range start and leave end blank..it will choose accordingly.

[andyp]

Very welcome..Thanks for the feedback!!

AndyP, I used your tool for this and checked before upload. Proof of concept, at least for 1024k bios. I still have a problem with errors at other size bios, esp. 512k.

****Be aware, I did check the mod before upload, I had no doubt as to the activation. The tool works for these bios at 1024k (to repeat):D:D

Input 50000 in the slic range start and leave end blank..it will choose accordingly.

Thanks for this mate. I have read your PM and please find version that fixes the problem with 512K BIOSes (the next_pointer's are all invalid) and also implements (I hope) the method you described in your PM. I have been reading the ACPI 3.0b specs - it suggets that the OEM+table ID in RSDT,XSDT and FACP must all much. However it also suggests that the table ID in the others should be different to allow searching etc... so it only modifies the oem table 6 bytes for the others.

Haven't changed the existing SLIC table yet.... might change to OEMS as OEMx is a valid table whereas SLEC isn't.

Also playing around with checksums - I am sure the ROM checksum is 32 bit so I don't think just changing byte 375 after SLIC to 89h works....... I have some thoughts.

v0.4 ** REMOVED - ERROR FOUND IN PATCHING CODE **

As it's nearly christmas and I am working tomorrow (boo hiss) I have only tested against a couple of ROMs.

Happy, Healthy and Peaceful Christmas to All,
Andy

[911medic]

Thanks for this mate. I have read your PM and please find version that fixes the problem with 512K BIOSes (the next_pointer's are all invalid) and also implements (I hope) the method you described in your PM. I have been reading the ACPI 3.0b specs - it suggets that the OEM+table ID in RSDT,XSDT and FACP must all much. However it also suggests that the table ID in the others should be different to allow searching etc... so it only modifies the oem table 6 bytes for the others.

Haven't changed the existing SLIC table yet.... might change to OEMS as OEMx is a valid table whereas SLEC isn't.

Also playing around with checksums - I am sure the ROM checksum is 32 bit so I don't think just changing byte 375 after SLIC to 89h works....... I have some thoughts.

v0.4 here - http://drop.io/slictool2

As it's nearly christmas and I am working tomorrow (boo hiss) I have only tested against a couple of ROMs.

Happy, Healthy and Peaceful Christmas to All,
Andy
Very nice, I will test and let you know what I find...

Merry Christmas!!

[andyp]

I have found an error in v0.4. Fixing now. Don't use.

Andy

[andyp]

Fixed problem with 0.4 - was writing 0's in wrong place so DO NOT USE.

However throws up interesting situation. I wanted only to adjust the OEM ID (6 bytes) of tables other than RSDT/XSDT/FACP as per ACPI specs - however when I do that, even with 0'ing the entire copyright string the resultant compressed 1B is still too big - is there anything else I can blank to get the size down (other than the creator IDs). What about the second copyright string (or is that the one you see at the bottom of the screen at POST)?

New version therefore has to replace OEM AND Table ID for all ACPI tables. The copyright string is then 0'd and filled with randomly generated bytes - occasionally this results in an overshoot and an error - just run it again- I am working on this - if predictable values are used then sometimes compression is too good.....

Still consider beta. Value feedback.

http://drop.io/slictool2

** Changelog

v0.5 (since 0.3)

ADD: Range can be specified for SLIC insertion
ADD: Manual insertion address is validated (to ensure not in a module or beyond end of file)
ADD: Copyright string is replaced and all OEM/Table IDs are patched to match the SLIC
ADD: Existing SLIC in 1B is removed
ADD: Log file generation

FIX: Module scan for 512K MSI BIOS not working (headers have invalid next_offset)
FIX: Creating a smaller 1B module caused an exception (due to unsigned int)
FIX: 32 bit ROM checksum is corrected (in theory....)
FIX: Go button disabled whilst the routine is executing

Cheers
Andy

[p4spooky]

Fixed problem with 0.4 - was writing 0's in wrong place so DO NOT USE.

However throws up interesting situation. I wanted only to adjust the OEM ID (6 bytes) of tables other than RSDT/XSDT/FACP as per ACPI specs - however when I do that, even with 0'ing the entire copyright string the resultant compressed 1B is still too big - is there anything else I can blank to get the size down (other than the creator IDs). What about the second copyright string (or is that the one you see at the bottom of the screen at POST)?

New version therefore has to replace OEM AND Table ID for all ACPI tables. The copyright string is then 0'd and filled with randomly generated bytes - occasionally this results in an overshoot and an error - just run it again- I am working on this - if predictable values are used then sometimes compression is too good.....

Still consider beta. Value feedback.

http://drop.io/slictool2

** Changelog

v0.5 (since 0.3)

ADD: Range can be specified for SLIC insertion
ADD: Manual insertion address is validated (to ensure not in a module or beyond end of file)
ADD: Copyright string is replaced and all OEM/Table IDs are patched to match the SLIC
ADD: Existing SLIC in 1B is removed
ADD: Log file generation

FIX: Module scan for 512K MSI BIOS not working (headers have invalid next_offset)
FIX: Creating a smaller 1B module caused an exception (due to unsigned int)
FIX: 32 bit ROM checksum is corrected (in theory....)
FIX: Go button disabled whilst the routine is executing

Cheers
Andy

Great Andy - will continue testing and provide feedback. Merry Christmas!

[caudex]

Can i get a mod for the following?

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : Dell Vista Business or Asus Vista Business.
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8764&type=bios

Thanks!

[zort]

- Motherboard Manufacturer And Model : MSI P43 Neo-F, P43 (7519)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : Dell Vista Business or Asus Vista Business.
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8764&type=bios

There's one with HP slic already made...

P43 Neo-F, P43 (7519) - ver. 1.7: AMI
slic=HP mod 911medic, tested האח_הגדול,
http://slics.myftp.org/MSI7519v17_HP_SLIC_SLP1_.rar
oenbiosfiles, XP http://www.fileden.com/files/2008/8/13/2048424/program/HP.rar
Flash from DOS with the AFUDOS included. No switches..
AFUDOS /IA7519IMS.170

[caudex]

awesome. haha didnt know that Asus works for HP SLIC

[p4spooky]

Fixed problem with 0.4 - was writing 0's in wrong place so DO NOT USE.

However throws up interesting situation. I wanted only to adjust the OEM ID (6 bytes) of tables other than RSDT/XSDT/FACP as per ACPI specs - however when I do that, even with 0'ing the entire copyright string the resultant compressed 1B is still too big - is there anything else I can blank to get the size down (other than the creator IDs). What about the second copyright string (or is that the one you see at the bottom of the screen at POST)?

New version therefore has to replace OEM AND Table ID for all ACPI tables. The copyright string is then 0'd and filled with randomly generated bytes - occasionally this results in an overshoot and an error - just run it again- I am working on this - if predictable values are used then sometimes compression is too good.....

Still consider beta. Value feedback.

http://drop.io/slictool2

** Changelog

v0.5 (since 0.3)

ADD: Range can be specified for SLIC insertion
ADD: Manual insertion address is validated (to ensure not in a module or beyond end of file)
ADD: Copyright string is replaced and all OEM/Table IDs are patched to match the SLIC
ADD: Existing SLIC in 1B is removed
ADD: Log file generation

FIX: Module scan for 512K MSI BIOS not working (headers have invalid next_offset)
FIX: Creating a smaller 1B module caused an exception (due to unsigned int)
FIX: 32 bit ROM checksum is corrected (in theory....)
FIX: Go button disabled whilst the routine is executing

Cheers
Andy

Tried this version - appears that IB_SLIC.BIN is not created if I choose MMTool to manually update the 1B module in the bios in SSV3 mode.

If I choose full auto mode, it does create the xxx-SLIC.ROM file. Not sure if the IB module is the slic version in the modified bios.

Works correctly in SSv2 mode (creates the IB_SLIC.bin and the modified bios output files)

Please take a look at the code :cool:

[shortbus]

DELL SLIC = http://slics.myftp.org/7528v34_MSI_DELL_SLIC.rar
Flash from DOS with AFUDOS..NO switches. clear cmos and load defaults..

feedback please///

Thanks medic! I flashed, and it worked. I'll let you know when I get Vista installed. Crazy holiday times put me behind schedule! :p

[911medic]

Thanks medic! I flashed, and it worked. I'll let you know when I get Vista installed. Crazy holiday times put me behind schedule! :p
Great..YOu should be fine now..Check back with activation!!:D:D

[shortbus]

Great..YOu should be fine now..Check back with activation!!:D:D

Just activated, and everything went extra smooth. You're awesome, medic! :D

[surrgon]

MSI SLIC = http://slics.myftp.org/7551v11_MSI_SLIC.rar

Flash from DOS with AFUDOS..No switches. clear cmos and load defaults post flash..Certs here = http://rapidshare.com/files/118119842/39-CERTS.zip

Good luck and feedback please!!:D:D

I need a medic (911) !!!!

Could you please mod a newer version of this bios for me, I need the updated Bios Version 7551v13 !

Download Link Bios : http://download1.msi.com.tw/files/downloads/bos_exe/7551v13.zip

Thanks in advance

Edit :

Motherboard Manufacturer And Model : MSI KA790GX
Bios Revision : 7571v13
Bios Type : AMI
Bios SLIC : MSI (Vista Ultimate)

Download :http://download1.msi.com.tw/files/downloads/bos_exe/7551v13.zip

[911medic]

I need a medic (911) !!!!

Could you please mod a newer version of this bios for me, I need the updated Bios Version 7551v13 !

Download Link Bios : http://download1.msi.com.tw/files/downloads/bos_exe/7551v13.zip

Thanks in advance

Edit :

Motherboard Manufacturer And Model : MSI KA790GX
Bios Revision : 7571v13
Bios Type : AMI
Bios SLIC : MSI (Vista Ultimate)

Download :http://download1.msi.com.tw/files/downloads/bos_exe/7551v13.zip
MSI SLIC = http://slics.myftp.org/7551v13_MSI_SLIC.rar

Okey-Dokey...Flash from DOS with AFUDOS..No switches. Clear cmos and load defaults.

:D:D Please be sure it is the correct bios. There are two listed in this post..7571&7551..mod is for 7551v13

[zort]

awesome. haha didnt know that Asus works for HP SLIC

You can use any mfr, but you need to install the correct cert to match whichever slic is in the bios.

ex:
slmgr.vbs -ilc C:\hp.xrm-ms

[andyp]

Tried this version - appears that IB_SLIC.BIN is not created if I choose MMTool to manually update the 1B module in the bios in SSV3 mode.

If I choose full auto mode, it does create the xxx-SLIC.ROM file. Not sure if the IB module is the slic version in the modified bios.

Works correctly in SSv2 mode (creates the IB_SLIC.bin and the modified bios output files)

Please take a look at the code :cool:

Fixed. Sorry

http://drop.io/slictool2

v0.6

ADD: Options dialog
ADD: Check for previous SLIC mod
ADD: Code to get correct 1B size now replaces zeroed areas with the original contents
ADD: Finer granularity for sizing routine

FIX: Check for presence of MMTool (if selected)
FIX: SSV3 mod not create 1B_SLIC.BIN file
FIX: MMTool checkbox only for SSV3 method

To correct 1b size

If too large - will zero first the copyright string, then the IBM string then the address string.

If then to small - will sequentially add back the last string zeroed until the correct size

If too large to start then will insert dummy bytes before the AMIBIOS string.

This also allows it now to only replace the table ID for RSDT/XSDT/FACP tables as per ACPI specs - although this is controllable by an option.

Consider beta and value all feedback as always - and thanks especially to 911medic, zort and p4spooky!

I am watching the p5q thread with interest also.....

Cheers
Andy

[911medic]

Fixed. Sorry

http://drop.io/slictool2

v0.6

ADD: Options dialog
ADD: Check for previous SLIC mod
ADD: Code to get correct 1B size now replaces zeroed areas with the original contents
ADD: Finer granularity for sizing routine

FIX: Check for presence of MMTool (if selected)
FIX: SSV3 mod not create 1B_SLIC.BIN file
FIX: MMTool checkbox only for SSV3 method

To correct 1b size

If too large - will zero first the copyright string, then the IBM string then the address string.

If then to small - will sequentially add back the last string zeroed until the correct size

If too large to start then will insert dummy bytes before the AMIBIOS string.

This also allows it now to only replace the table ID for RSDT/XSDT/FACP tables as per ACPI specs - although this is controllable by an option.

Consider beta and value all feedback as always - and thanks especially to 911medic, zort and p4spooky!

I am watching the p5q thread with interest also.....

Cheers
Andy

I like it...The tool works very well. I REALLY, REALLY like the resizing routine..Strong work!!:D:D

I was curious about the 32bit checksum..

If we haven't had any probs with just adjusting for the slic code, why do we need to adjust the 32 bit checksum now??

I dont think it is important if the 8bit is adjusted for slic code.., just my opinion...Could enlighten me to the reasoning??

edit: I tried it on a couple of the 4096k bios and some 512k, 2048k..this is very consistant. for SSV2, Is there a way we can add string at the $ODB$ for some slp1. I sometimes do this in manual mods with HP,DELL,ASUS mods..Is this possible??
I tried adding the slic file with slp1 strings for SSV3 and it wont let me override..Here (http://www.fileden.com/files/2008/8/13/2048424/My%20Documents/slp1_2.rar) is an example of what I am talking about..

Again..VERY nice program. You are very skilled..

[surrgon]

MSI SLIC = http://slics.myftp.org/7551v13_MSI_SLIC.rar

Okey-Dokey...Flash from DOS with AFUDOS..No switches. Clear cmos and load defaults.

:D:D Please be sure it is the correct bios. There are two listed in this post..7571&7551..mod is for 7551v13

GREAT ! Thank you so much !
It is the corect one. Type mismatch error in my request post.:D:D

Thanks again !

[andyp]

... Is there a way we can add string at the $ODB$ for some slp1. I sometimes do this in manual mods with HP,DELL,ASUS mods..Is this possible??


v0.7

ADD: SLP1.0 string insertion
ADD: Fix AMIMMWIN damage if used for SSV3
FIX: Small bug in resize code

http://drop.io/slictool2

The SLP code works either with or without SLIC (ie you can create a BIOS with one, the other or both). It also works for both SSV2 and SSV3 ie. with SSV2 the 1B is resized and copied, with SSV3 it is just reinserted. The SLP code expects a TXT file with the bytes to be inserted (so no CRLF at the end).

BTW do you know if the space (Chr(32)) after the SLP string is important - zhaolings tool inserts one for most SLP strings??

Q - is putting it after $ODB$ enough for all SLPs. Looking at the thread in MSFN where OEMBIOS.DATs have been decrypted (still trying to figure how - something to do with the first 80 (?h) bytes of OEMBIOS.SIG as a certificate/key) some locations have to be quite precisice (eg. Dell).

Cheers,
Andy

[Yen]

The string behind $ODB$ will be always mapped to 000FE840. If you check the valid ranges, you'll see that almost all OEM'S have valid addresses there. (except MSI). If you want to use multi OEM you have to place the one with narrow ranges like Dell and Sony first, like Dell ComputerSony Corporation.
The space behind is not necessary, you may even use string sequences without any space.

About to decrypt OEM files: Let winlogon do the job for you. Exchange the OEM files with the ones you want decrypt, (re)boot xp and dump the winlogon process right after you've logged into xp using offon's tool:

Here is the interesting part and his tool.
http://forums.mydigitallife.info/showthread.php?t=2326&page=6

Btw: Didn't try your tool so far, (busy doing other bios stuff) but I really appreciate your contribution and effort.:)

[p4spooky]

v0.7

ADD: SLP1.0 string insertion
ADD: Fix AMIMMWIN damage if used for SSV3
FIX: Small bug in resize code

http://drop.io/slictool2

The SLP code works either with or without SLIC (ie you can create a BIOS with one, the other or both). It also works for both SSV2 and SSV3 ie. with SSV2 the 1B is resized and copied, with SSV3 it is just reinserted. The SLP code expects a TXT file with the bytes to be inserted (so no CRLF at the end).

BTW do you know if the space (Chr(32)) after the SLP string is important - zhaolings tool inserts one for most SLP strings??

Q - is putting it after $ODB$ enough for all SLPs. Looking at the thread in MSFN where OEMBIOS.DATs have been decrypted (still trying to figure how - something to do with the first 80 (?h) bytes of OEMBIOS.SIG as a certificate/key) some locations have to be quite precisice (eg. Dell).

Cheers,
Andy

GREAT work Andy. I tried this on couple of my boards and they both work (P5Q Pro and MSI K9A2 Platinum). I will continue to test and report any issues :)

[andyp]

New version

http://drop.io/slictool2

v0.8

ADD: SSV1 and Dynamic mod methods
ADD: Success dialog at end

FIX: Remove whitespace from end of SLP string
FIX: Inadvertantly removed error handling
FIX: AMIMMWIN repair code now checks &H10000

Implements the old dynamic method 31h->21h and the new one from the p5q thread - bear in mind this is still EXPERIMENTAL!

Andy

[mmstudio]

Hi Medic911, please help me with the following BIOS mod. I am still using your Shuttle K45 bios on my other PC and it's working flawlessly!

Motherboard Manufacturer And Model : MSI Media Live Diva 7411
Bios Revision : A7411KMS.120 (1.20)
Bios Type : AMI
Bios SLIC : DELL (Vista) and if possible, HP (XP)

Download: http://download1.msi.com.tw/files/downloads/bos_exe/A7411KMS_120.zip

[911medic]

Hi Medic911, please help me with the following BIOS mod. I am still using your Shuttle K45 bios on my other PC and it's working flawlessly!

Motherboard Manufacturer And Model : MSI Media Live Diva 7411
Bios Revision : A7411KMS.120 (1.20)
Bios Type : AMI
Bios SLIC : DELL (Vista) and if possible, HP (XP)

Download: http://download1.msi.com.tw/files/downloads/bos_exe/A7411KMS_120.zip

DELL SLIC/HP_COMPAQ SLP1 = http://slics.myftp.org/MSI_A7411KMS_120_HP1_DELL2_SLIC.rar

Flash from DOS with AFUDOS. No switches. Clear cmos and load defaults after flash.

Feedback please..:D

[blackrose92]

Please mod this BIOS for me, latest bios v1.5

- Motherboard Manufacturer And Model : MSI P45 Platinum
- Bios Revision : 1.5
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7512v15.zip

Thanks for your help

[911medic]

Please mod this BIOS for me, latest bios v1.5

- Motherboard Manufacturer And Model : MSI P45 Platinum
- Bios Revision : 1.5
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7512v15.zip

Thanks for your help

MSI SLIC = http://slics.myftp.org/7512v15_MSI_SLIC.rar

Flash from DOS with AFUDOS. No Switches..CLear cmos and load defaults after flash..

Feedback please!!:D

[blackrose92]

MSI SLIC = http://slics.myftp.org/7512v15_MSI_SLIC.rar

Flash from DOS with AFUDOS. No Switches..CLear cmos and load defaults after flash..

Feedback please!!:D


Awesome works like a charm. if possible can you make one more mod with Asus slic ?

Thanks a million !!!

[mmstudio]

DELL SLIC/HP_COMPAQ SLP1 = http://slics.myftp.org/MSI_A7411KMS_120_HP1_DELL2_SLIC.rar

Flash from DOS with AFUDOS. No switches. Clear cmos and load defaults after flash.

Feedback please..:D

I flashed it with no switches and rebooted. Bios reported CMOS Checksum Bad (after clear CMOS and reload default). Not able to get rid of it. I managed to reboot into DOS and reflashed the same file with MSI default switches on (AFUDOS A7411KMS.120 /P /B /N /C) and it worked like a charm without clearing CMOS. Thanks!

[911medic]

I flashed it with no switches and rebooted. Bios reported CMOS Checksum Bad (after clear CMOS and reload default). Not able to get rid of it. I managed to reboot into DOS and reflashed the same file with MSI default switches on (AFUDOS A7411KMS.120 /P /B /N /C) and it worked like a charm without clearing CMOS. Thanks!

Im glad it worked for you. It should be known to use these switches then for flashing this bios..AFUDOS A7411KMS.120 /P /B /N /C. I think maybe flashing the unmodded bios first and then the mod bios may be helpful also....

Thanks for the feedback.:D:D

[thomas_d785]

Hello,

can you help me with my MSI K9N SLI V2.
defenseless someone so nice and would give me a guide for SLP & SLIC (link) to send my please.

I have the board ever destroyed with the AMI_SLIC3_20080419.

Can I use the MSI K9N SLI V2 also with the slictool8 handled?
If so, water must I set the SSV1, SSV2, SSV3 note?

what I recognize that there is a SSV2?


Thank you

Sorry for my english please

[911medic]

Hello,

can you help me with my MSI K9N SLI V2.
defenseless someone so nice and would give me a guide for SLP & SLIC (link) to send my please.

I have the board ever destroyed with the AMI_SLIC3_20080419.

Can I use the MSI K9N SLI V2 also with the slictool8 handled?
If so, water must I set the SSV1, SSV2, SSV3 note?

what I recognize that there is a SSV2?


Thank you

Sorry for my english please

The slic 8 is still being tested..I think it would work, if you are not familiar with the process, it may be better to not use it. I will make you a mod, which manufacturer do you prefer..:D:D

[p4spooky]

The slic 8 is still being tested..I think it would work, if you are not familiar with the process, it may be better to not use it. I will make you a mod, which manufacturer do you prefer..:D:D

MSI boards are notorious for providing no way to recover if you have a bad flash. I think you should let Medic handle this. :D

I am testing the tool doing SSV2 mod on a ECS G31T-M motherboard that I don't care if I loose. So far this tool has been amazing. NO ISSUES with 0.8

Tried a SSV2 mod on a Asus P5Q Deluxe 1702M bios (usinf 0.8) and it works fine.

Great job Andy :)

[911medic]

Hello,

can you help me with my MSI K9N SLI V2.
defenseless someone so nice and would give me a guide for SLP & SLIC (link) to send my please.

I have the board ever destroyed with the AMI_SLIC3_20080419.

Can I use the MSI K9N SLI V2 also with the slictool8 handled?
If so, water must I set the SSV1, SSV2, SSV3 note?

what I recognize that there is a SSV2?


Thank you

Sorry for my english please

Try this HP SLIC/SLP1. http://slics.myftp.org/7390v11_HP_SLIC_SLP1.rar

Flash from DOS with AFUDOS. No switches..

Feedback please!:D

[cuda]

Hi I need help for the following bios

- Motherboard Manufacturer And Model : MSI P35 Neo 2 Fr (7345)
- Bios Revision : 1.10
- Bios Type : AMI
- Bios SLIC : Asus
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7345v1A.zip

Many Thanks!

[911medic]

Hi I need help for the following bios

- Motherboard Manufacturer And Model : MSI P35 Neo 2 Fr (7345)
- Bios Revision : 1.10
- Bios Type : AMI
- Bios SLIC : Asus
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7345v1A.zip

Many Thanks!

There is one already mod and tested..with MSI slic in the All slics thread..Just add the MSI cert and you should be set...http://www.fileden.com/files/2008/8/13/2048424/7345v1AMSI_SLIC.rar

[arnt2]

Please mod this BIOS for me, latest bios v1.7

- Motherboard Manufacturer And Model : P35 Neo Combo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7365v17.zip

Thanks for your help

[911medic]

Please mod this BIOS for me, latest bios v1.7

- Motherboard Manufacturer And Model : P35 Neo Combo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7365v17.zip

Thanks for your help

MSI SLIC = http://slics.myftp.org/7365v17_MSI_SLIC.rar

Flash from DOS with AFUDOS. Do not use switches for initial flash.

Feedback please!

[arnt2]

MSI SLIC = http://slics.myftp.org/7365v17_MSI_SLIC.rar

Flash from DOS with AFUDOS. Do not use switches for initial flash.

Feedback please!

Works like a charm! Vista activated.
Thank you very much for your excellent job

[911medic]

Please mod this BIOS for me, latest bios v1.7

- Motherboard Manufacturer And Model : P35 Neo Combo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI


Thanks for your help


MSI SLIC = http://slics.myftp.org/7365v17_MSI_SLIC.rar

Flash from DOS with AFUDOS. Do not use switches for initial flash.

Feedback please!


Works like a charm! Vista activated.
Thank you very much for your excellent job

Thank you very much for the feedback!!

[ymymaster]

Hello!
Please make this BIOS:
Manifacturer: MSI P45 Neo3 PCB 1.0
SLIC: ASUS.
Download Link:
http://global.msi.com.tw/index.php?func=downloadfile&dno=8762&type=bios
Thanks.

[thomas_d785]

Hello,

can you help me with my MSI K9N SLI V2.
defenseless someone so nice and would give me a guide for SLP & SLIC (link) to send my please.

I have the board ever destroyed with the AMI_SLIC3_20080419.

Can I use the MSI K9N SLI V2 also with the slictool8 handled?
If so, water must I set the SSV1, SSV2, SSV3 note?

what I recognize that there is a SSV2?


Thank you

Sorry for my english please

Try this HP SLIC/SLP1. http://slics.myftp.org/7390v11_HP_SLIC_SLP1.rar

Flash from DOS with AFUDOS. No switches..

Feedback please!:D

911medic big thanks
It runs great 100%
I have it with XP and Vista Ultimate (64bit) tested.

- Motherboard Manufacturer And Model : MSI K9N SLI V2 (7390) VER: 1.0
- Bios Revision : 1.1
- Bios Type : AMI
- Bios SLP1 : HP
- Bios SLIC : HP
- Download Link : http://slics.myftp.org/7390v11_HP_SLIC_SLP1.rar

Thank you 911medic

Sorry for my english please

[p4spooky]

Hello!
Please make this BIOS:
Manifacturer: MSI P45 Neo3 PCB 1.0
SLIC: ASUS.
Download Link:
http://global.msi.com.tw/index.php?func=downloadfile&dno=8762&type=bios
Thanks.

Please try this: http://www.box.net/shared/l3ddsccf9k

Report back please :cool:

[andyp]

The slic 8 is still being tested..I think it would work, if you are not familiar with the process, it may be better to not use it.

Lets see what we can do about this then!!!

I have added some code so that every file step is verified. Some general tidying and improving of prompts esp related to success/fail.

1) I value general feedback - ease of use/design etc.
2) Specifically I would value feedback about any 'difficult' AMI BIOSes you have come accross - this should handle all core 8 BIOSes every which way.

This should be ready for prime time (for those that understand the general principles and are happy to take all the risks involved in flashing a BIOS and are aware of recovery procedures).

http://drop.io/slictool2

v0.9

ADD: Verification at each step (module insertion, mmtool usage etc.)
ADD: Icon and XP visual style
ADD: Option to only alter RSDT and XSDT tables
ADD: Option to enforce padding before SLIC in SSV2 method - requested by zort
ADD: Option to 'correct' 32 bit checksum (automatic before)
ADD: Status box

FIX: Default start address for SLIC in SSV2 set to 50000h (Otherwise inserts in first 64k of some ASUS BIOSes) - thanks 911medic
FIX: Append SLP1.0 string to existing string at $ODB$
FIX: Speedup module scan routine
FIX: Improved clarity of prompts
FIX: Renamed SSV1 to SSV to avoid AWARD BIOS confusion

Enjoy :D
Andy

[ymymaster]

Please try this: http://www.box.net/shared/l3ddsccf9k

Report back please :cool:
Thanks. Vista activated.

[p4spooky]

Thanks. Vista activated.

Thanks for the feedback - Enjoy :D

Manifacturer: MSI P45 Neo3 PCB 1.0
SLIC: ASUS
Bios Version: 1.6
Mod Bios Link: http://www.box.net/shared/l3ddsccf9k

[TR2N]

There is one already mod and tested..with MSI slic in the All slics thread..Just add the MSI cert and you should be set...http://www.fileden.com/files/2008/8/13/2048424/7345v1AMSI_SLIC.rar

Hi Medic911!

Thanks to you, YEN and the others for the great work! I have the same Mobo (MSI P35 Platinum PCB 1.1) with BIOS 1.9 ASUS SLIC, patched by you and working great so far. :-)

When i now switch to the 1.1 version (7345v1A) with MSI slic, do i need a OEM product-key from MSI (if yes, can someone post or pm me plz...?) for my Vista Home Premium x86 to activate? Or is it possible that you create a ASUS slic based? Sorry for my newbie questions....

Thank you!
Nico

[911medic]

Hi Medic911!

Thanks to you, YEN and the others for the great work! I have the same Mobo (MSI P35 Platinum PCB 1.1) with BIOS 1.9 ASUS SLIC, patched by you and working great so far. :-)

When i now switch to the 1.1 version (7345v1A) with MSI slic, do i need a OEM product-key from MSI (if yes, can someone post or pm me plz...?) for my Vista Home Premium x86 to activate? Or is it possible that you create a ASUS slic based? Sorry for my newbie questions....

Thank you!
Nico
Only the cert should be necessary. The serial should be the same..

Just in case, I do not know about Home Premium..ASUS SLIC = http://slics.myftp.org/7345v1A_ASUS.rar

[TR2N]

Hi 911medic!

Thanks for your fast reply! :)

Will also test the MSI SLICed BIOS, thanks for that one with ASUS SLIC, you are great!

Do i have to insert some switches, when i flash the BIOS from DOS?

Cheers,
Nico

[911medic]

Hi 911medic!

Thanks for your fast reply! :)

Will also test the MSI SLICed BIOS, thanks for that one with ASUS SLIC, you are great!

Do i have to insert some switches, when i flash the BIOS from DOS?

Cheers,
Nico

No switches..Just flash away. If you get an error, then we will try the switches.

We do not want to flash the bootblock if we dont have to..:D

[TR2N]

Thanks 911medic, i will give it a try. Await feedback from me in the next couple of days.

nico

[Dyasan]

- Motherboard Manufacturer And Model : MSI K9AGM3-FIH (MS-7367)
- Bios Revision : 1.4
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7367v14.zip

Please,need your help.

[hassborn]

Hi I really need help for the following bios

- Motherboard Manufacturer And Model : MSI Eclipse SLI (x58)
- Bios Revision : 1.34
- Bios Type : AMI
- Bios SLIC : Asus
- Download Link : http://www.jabberwoky.de/bilder/A7520IMS.134.rar

THX in advance!

[Pyotr]

Hi I really need help for the following bios please:

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.2
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v32.zip

THX in advance!

[911medic]

Hi I really need help for the following bios please:

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.2
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v32.zip

THX in advance!

MSI SLIC = http://slics.myftp.org/7374v32_MSI_SLIC.rar

Flash from DOS with AFUDOS. clear cmos and load defaults after flash..Flash with no switches.

feedback please!

[911medic]

Hi I really need help for the following bios

- Motherboard Manufacturer And Model : MSI Eclipse SLI (x58)
- Bios Revision : 1.34
- Bios Type : AMI
- Bios SLIC : Asus
- Download Link : http://www.jabberwoky.de/bilder/A7520IMS.134.rar

THX in advance!

ASUS SLIC = http://slics.myftp.org/MSI_A7520IMS.134_ASUS.rar

Flash from DOS with AFUDOS..No switches. Claer cmos and load defaults after flash..

Feedback please!!:D

[911medic]

- Motherboard Manufacturer And Model : MSI K9AGM3-FIH (MS-7367)
- Bios Revision : 1.4
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7367v14.zip

Please,need your help.

MSI SLIC = http://slics.myftp.org/7367v14_MSI_SLIC.rar

FLash form DOS with AFUDOS.NO switches. Clear cmos and load defaults after flash.

Feedback please!!:D

[migo]

- Motherboard Manufacturer And Model : MSI K9A2 CF (CF-F)
- Bios Revision : 1.8beta5
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://depositfiles.com/files/1tabfcozu

Thanks in advance

[hassborn]

Thank you so much 911medic!

I WILL post if it works as soon as the board is back from RMA.

[Dyasan]

MSI SLIC = http://slics.myftp.org/7367v14_MSI_SLIC.rar

FLash form DOS with AFUDOS.NO switches. Clear cmos and load defaults after flash.

Feedback please!!:D

All fine thank you!

[911medic]

- Motherboard Manufacturer And Model : MSI K9A2 CF (CF-F)
- Bios Revision : 1.8beta5
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://depositfiles.com/files/1tabfcozu

Thanks in advance

ASUS SLIC = http://slics.myftp.org/A7388AMST.185_ASUS_SLIC.rar

Flash the unmodded bios first to be sure the bios is working properly. It is beta.

Flash from DOS with AFUDOS. Clear cmos and load defaults.

Feedback please!!

[migo]

works fine. thank you very much.

[911medic]

- Motherboard Manufacturer And Model : MSI K9A2 CF (CF-F)
- Bios Revision : 1.8beta5
- Bios Type : AMI
- Bios SLIC : ASUS

Thanks in advance

http://slics.myftp.org/A7388AMST.185_ASUS_SLIC.rar
works fine. thank you very much.


Thanks for the Feedback!!:D:D

[TR2N]

There is one already mod and tested..with MSI slic in the All slics thread..Just add the MSI cert and you should be set...http://www.fileden.com/files/2008/8/13/2048424/7345v1AMSI_SLIC.rar

Hi 911medic!

Flashed MSI SLICed BIOS, added certificate - works great! Thank you very very much for your outstanding work!!!!!

Cu,
Nico

[123412345]

hi!
can someone pls put slic on this one? it is not beta as the one before
- Motherboard Manufacturer And Model : MSI K9A2 CF (CF-F)
- Bios Revision : 1.8
- Bios Type : AMI
- Bios SLIC : ASUS
http://download1.msi.com.tw/files/downloads/bos_exe/7388v18.zip

Thanks in advance

[911medic]

hi!
can someone pls put slic on this one? it is not beta as the one before
- Motherboard Manufacturer And Model : MSI K9A2 CF (CF-F)
- Bios Revision : 1.8
- Bios Type : AMI
- Bios SLIC : ASUS
http://download1.msi.com.tw/files/downloads/bos_exe/7388v18.zip

Thanks in advance

ASUS SLIC = http://slics.myftp.org/MSI_7388v18_ASUS_SLIC.rar

flash from dos with afudos..no switches.

clear cmos and load defaults after flash..

Feedback please!!

[igloo]

Hi 911medic,
I finally got a chance to install Vista. However I couldn't activate it with HP cert (tried vista sp1 32bit and win2008 64bit). Could you please double check the modded bios? Thanks.
(History: I activated XP Pro with it successfully.)

HP SLIC/SLP1 = http://slics.myftp.org/7345v1AMSI_HP_SLIC_SLP.rar

Flash from DOS with AFUDOS. No switches. Feedback please!!:D

[Pyotr]

Hi I really need help for the following bios please:

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.2
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v32.zip

THX in advance!
MSI SLIC = http://slics.myftp.org/7374v32_MSI_SLIC.rar

Flash from DOS with AFUDOS. clear cmos and load defaults after flash..Flash with no switches.

feedback please!

Thanks, it works vista ultimate x64 activated !
BTW MSI slic work with hp/asus ultimate key

[ranzen]

can somebody mod this Bios

Motherboard: MSI K9N Neo V2

Bios Version 2.74 and 3.00
Bios Type: AMI
Bios Link: http://rapidshare.com/files/18165719...S.274.zip.html
and http://uploaded.to/?id=pnft8i

please an ASUS or MSI SLIC

thanks

[123412345]

ASUS SLIC = http://slics.myftp.org/MSI_7388v18_ASUS_SLIC.rar

flash from dos with afudos..no switches.

clear cmos and load defaults after flash..

Feedback please!!

thx, great work!

[911medic]

Hi 911medic,
I finally got a chance to install Vista. However I couldn't activate it with HP cert (tried vista sp1 32bit and win2008 64bit). Could you please double check the modded bios? Thanks.
(History: I activated XP Pro with it successfully.)

http://slics.myftp.org/7345v1AMSI_HP_SLIC_SLP.rar

Try this one please..I apologize, it was my error. Not enough to break the bios, just an address error.

Again, I apologize..:o;)

[Pyotr]

Hi 911medic thanks again for my previous mood it works great, but today msi release new version of bios, so can somebady help me please?

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.3
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v33.zip


THX in advance!

[igloo]

This time it works like a charm. Thank you again, 911medic. Your response is so quick!
http://slics.myftp.org/7345v1AMSI_HP_SLIC_SLP.rar

Try this one please..I apologize, it was my error. Not enough to break the bios, just an address error.

Again, I apologize..:o;)

[911medic]

Hi 911medic thanks again for my previous mood it works great, but today msi release new version of bios, so can somebady help me please?

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.3
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v33.zip


THX in advance!

MSI SLIC = http://slics.myftp.org/MSI_7374v33MSI_SLIC.rar

Flash from DOS with AFUDOS. No switches.

Clear cmos and load defaults after flash.

If I may ask, is it NECESSARY to upgrade bios..Simply newer does NOT mean better...

I was just curious:D:D

[911medic]

This time it works like a charm. Thank you again, 911medic. Your response is so quick!

You are welcome..Again, I apologize for my error...:D

[Pyotr]

MSI SLIC = http://slics.myftp.org/MSI_7374v33MSI_SLIC.rar

Flash from DOS with AFUDOS. No switches.

Clear cmos and load defaults after flash.

If I may ask, is it NECESSARY to upgrade bios..Simply newer does NOT mean better...

I was just curious:D:D

Thanks for fast replay.

I know what you mean, but that one add support for new Phenom II x4 45nm process cpu which I have been waiting for and add/fix Support 1000GB HDD and L2 function

thanks again going to test...

[911medic]

Thanks for fast replay.

I know what you mean, but that one add support for new Phenom II x4 45nm process cpu which I have been waiting for and add/fix Support 1000GB HDD and L2 function

thanks again going to test...

Make sure the factory works good before mod flash..

[Pyotr]

Hi 911medic thanks again for my previous mood it works great, but today msi release new version of bios, so can somebady help me please?

- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.3
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7374v33.zip


THX in advance!
MSI SLIC = http://slics.myftp.org/MSI_7374v33MSI_SLIC.rar

Flash from DOS with AFUDOS. No switches.

Clear cmos and load defaults after flash.

If I may ask, is it NECESSARY to upgrade bios..Simply newer does NOT mean better...

I was just curious:D:D

Good work, Vista x64 still activated
Thanks very much

[TR2N]

Quote:
Originally Posted by heman1980 View Post
Hi Medic911!

Thanks to you, YEN and the others for the great work! I have the same Mobo (MSI P35 Platinum PCB 1.1) with BIOS 1.9 ASUS SLIC, patched by you and working great so far. :-)

When i now switch to the 1.1 version (7345v1A) with MSI slic, do i need a OEM product-key from MSI (if yes, can someone post or pm me plz...?) for my Vista Home Premium x86 to activate? Or is it possible that you create a ASUS slic based? Sorry for my newbie questions....

Thank you!
Nico

Only the cert should be necessary. The serial should be the same..

Just in case, I do not know about Home Premium..ASUS SLIC = http://slics.myftp.org/7345v1A_ASUS.rar

Hi 911medic,

i think, my reply was going under here. I have tested your BIOS for my MSI P35 Platinum with MSI SLIC - IT WORKS FANTASTIC!!!!! Thank you very very much!

[911medic]

Hi 911medic,

i think, my reply was going under here. I have tested your BIOS for my MSI P35 Platinum with MSI SLIC - IT WORKS FANTASTIC!!!!! Thank you very very much!

Very good, glad to help..

Thanks for the feedback!!!!

[krangas]

Hi. I see a lot of requests for modded BIOS, but can't seem to understand what is being modified?

Ended up here looking for a way to modify the BIOS myself, to enable OSX86 installation on my MSI P35 Neo2FR/7345. What I need is something like this here: http://forum.insanelymac.com/lofiversion/index.php/t90505-0.html, as the 1.8 rev of BIOS (which seems to be the only one floating around on OSX86 forums) doesn't seem to like my E8400 CPU :( Have had to rescue my BIOS from floppy numerous times now, so have give up on the 1.8

So my question is, I see there are v1a's of the 7345 BIOS floating around here (which I will try as soon as I get off work), should this enable OS X installation (namely the multi-core problem mentioned in URL)?

Or: Would anybody be so kind and modify the BIOS as mentioned in URL? :o
I know there are quite a few peeps out there that would appreciate such a mod :D

Edit: I see now that http://www.osxcores.site50.net/page1/page1.html has a mod for second newest BIOS revision, which may work (try after work).
Direct link to latest BIOS by MSI: http://global.msi.com.tw/index.php?func=downloadfile&dno=8655&type=bios

[rooiiedonder]

My question for you is to modify the bios for my motherboard.
my motherboard is the MSI K8T Neo2-F V2.0
the location of the original bios is 7094v36 (http://download1.msi.com.tw/files/downloads/bos_exe/7094v36.zip)

thanks

[123412345]

please can somebody mod this Bios

Motherboard: MSI K9A2 Neo-F

Bios Version 1.7
Bios Type: AMI
Bios Link: http://download1.msi.com.tw/files/downloads/bos_exe/7388v17.zip
maybe ASUS slic or any other

thanks very much

[911medic]

My question for you is to modify the bios for my motherboard.
my motherboard is the MSI K8T Neo2-F V2.0
the location of the original bios is 7094v36 (http://download1.msi.com.tw/files/downloads/bos_exe/7094v36.zip)

thanks


K8T Neo2-F v2.0 The last BIOS you'll ever need for this older motherboard
slic = Asus, mod Fzeven, tested by groove420
http://rapidshare.com/files/117346646/MSI_K8T_Neo2-F_v2.0_NEO2FMOD.BIN_Slic.rar.html

[911medic]

please can somebody mod this Bios

Motherboard: MSI K9A2 Neo-F

Bios Version 1.7
Bios Type: AMI
Bios Link: http://download1.msi.com.tw/files/downloads/bos_exe/7388v17.zip
maybe ASUS slic or any other

thanks very much

ASUS SLIC = http://slics.myftp.org/MSI_7388v17_ASUS_SLIC.rar

Flash form DOS with AFUDOS. No switches. Clear cmos and load defaults after flash.

Feedback please!!

[hassborn]

ASUS SLIC = http://slics.myftp.org/MSI_A7520IMS.134_ASUS.rar

Flash from DOS with AFUDOS..No switches. Claer cmos and load defaults after flash..

Feedback please!!:D

Bios works!! Thank you!!

[911medic]

Bios works!! Thank you!!

Youre welcome..enjoy

Thanks for the feedback!!

[truman]

Is it possible to mod this BIOS for me please - it's the latest bios v1.7

- Motherboard Manufacturer And Model : MSI P45 Neo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7519v17.zip

Thank you :)

[p4spooky]

Is it possible to mod this BIOS for me please - it's the latest bios v1.7

- Motherboard Manufacturer And Model : MSI P45 Neo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7519v17.zip

Thank you :)

Here is the MSI Slic: http://www.box.net/shared/yc5n54nq2g

Here is the ASUS Slic: http://www.box.net/shared/a9kb3cjt0r :cool:

Report back please :D

[truman]

Cool, you guys are great! Flashed MSI SLIC one, it works, Vista activated. :D

[p4spooky]

Cool, you guys are great! Flashed MSI SLIC one, it works, Vista activated. :D

Thanks for the feedback Enjoy! :D

- Motherboard Manufacturer And Model : MSI P45 Neo
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : MSI

Here is the MSI Slic: http://www.box.net/shared/yc5n54nq2g
Here is the ASUS Slic: http://www.box.net/shared/a9kb3cjt0r

[Erick75]

Hi,

Please mod this BIOS for me, latest bios v1.7B1 (Beta BIOS)
I have some troubles with v1.6 Release BIOS

- Motherboard Manufacturer And Model : MSI P45 Neo3-FR PCB 1.0
- Bios Revision : 1.7B1
- Bios Type : AMI
- Bios SLIC : ASUS

Download Link:
http://www.station-drivers.com/telechargement/msi/A7514IMS171.rar

Thanks for your help

[911medic]

Hi,

Please mod this BIOS for me, latest bios v1.7B1 (Beta BIOS)
I have some troubles with v1.6 Release BIOS

- Motherboard Manufacturer And Model : MSI P45 Neo3-FR PCB 1.0
- Bios Revision : 1.7B1
- Bios Type : AMI
- Bios SLIC : ASUS

Download Link:
http://www.station-drivers.com/telechargement/msi/A7514IMS171.rar

Thanks for your help

ASUS SLIC = http://slics.myftp.org/MSI_A7514IMS171_ASUS_SLIC.rar

Flash from DOS with AFUDOS. NO Switches. Clear cmos and load defaults after flash..
Feedback please!!!

[Erick75]

This BIOS works excellent :)
Thanks for the fast service!

[911medic]

This BIOS works excellent :)
Thanks for the fast service!

Happy to help.... Thanks for the feedback!!!:D:cool:

[zort]

Has anyone tested andyp's slic tool to patch an msi bios yet?

[911medic]

Has anyone tested andyp's slic tool to patch an msi bios yet?

Yep..it works. I adjust the settings a bit though. I have been using the tool off and on and then checking the mods against a manual. They are only slightly different.

Erik75 is a tool mod..I only check the range for slic insertion and remove the 0 in the second box so it starts at 50000h.

I do NOT have the 32 bit checksum adjusted.

I allow padding

I do NOT check the force below AMIBIOS string. (this has caused problems with other bios for me)..

So..the only boxed checked are the range for insertion and the allow padding box. The padding is optional. probably not necessary, as I have placed slic code VERY close to other code without problems..

Use the ssv2, check for a log. Check the log before you flash to see that all is good. Very seldom, if at all anymore, is there a discrepancy..

[zort]

Thanks for the info 911medic!

[andyp]

Yep..it works. I adjust the settings a bit though. I have been using the tool off and on and then checking the mods against a manual. They are only slightly different.

Erik75 is a tool mod..I only check the range for slic insertion and remove the 0 in the second box so it starts at 50000h.

I do NOT have the 32 bit checksum adjusted.

I allow padding

I do NOT check the force below AMIBIOS string. (this has caused problems with other bios for me)..

So..the only boxed checked are the range for insertion and the allow padding box. The padding is optional. probably not necessary, as I have placed slic code VERY close to other code without problems..

Use the ssv2, check for a log. Check the log before you flash to see that all is good. Very seldom, if at all anymore, is there a discrepancy..

Hi

I think p4spooky has used successfully as well several times.

The tool will check the BIOS checksum before and after modding so even if the 32bit checksum box isn't ticked it won't allow a bad BIOS out (eg. ASUS SSV2)

What problems (other than not finding a space) have you had with the force below AMIBIOS string, I know yen is of the opinion that this should be default.

The range insertion has been default on at 50000h for a while now, what version are you using ;)

Cheers,
Andy

[ugur-ugur]

- Motherboard Manufacturer And Model : MSI KA790GX (MS-7551)
- Bios Revision : 1.0
- Bios Type : AMI
- Bios SLIC : HP
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7551v10.zip

Please,need your help.

[p4spooky]

- Motherboard Manufacturer And Model : MSI KA790GX (MS-7551)
- Bios Revision : 1.0
- Bios Type : AMI
- Bios SLIC : HP
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7551v10.zip

Please,need your help.

Please try this (HP Slic): http://www.box.net/shared/2dffolqn0t

Report back please.

[911medic]

Hi

I think p4spooky has used successfully as well several times.

The tool will check the BIOS checksum before and after modding so even if the 32bit checksum box isn't ticked it won't allow a bad BIOS out (eg. ASUS SSV2)

What problems (other than not finding a space) have you had with the force below AMIBIOS string, I know yen is of the opinion that this should be default.

The range insertion has been default on at 50000h for a while now, what version are you using ;)

Cheers,
Andy

I used the latest. I just make sure the boxes are ticked as I need. Thats all.

I think the tool will work for most all bios now. I am curious about the core 7 bios mods...

As far as forcing the slic below the amibios, we had one a while back that would not activate with no slic at the acpiscope or everest. This was with he forced box ticked. I manually modded it to a different area, I dont remember where (sorry) and it worked. I have also had a few I tried with the tool and flash with ezflash and they threw chksm errors. A manual mod flashed without error. Strange I know.

The latest problem I had with checksum was with a couple of biostar boards.

[andyp]

I used the latest. I just make sure the boxes are ticked as I need. Thats all.

I think the tool will work for most all bios now. I am curious about the core 7 bios mods...

As far as forcing the slic below the amibios, we had one a while back that would not activate with no slic at the acpiscope or everest. This was with he forced box ticked. I manually modded it to a different area, I dont remember where (sorry) and it worked. I have also had a few I tried with the tool and flash with ezflash and they threw chksm errors. A manual mod flashed without error. Strange I know.

The latest problem I had with checksum was with a couple of biostar boards.

I think the ezflash error was due to amimmwin modifying 2 bytes in the EBB header that it shouldn't do. That is detected (and prevented by keeping the preserve boot block option checked) in the latest version.

Core 7 - I haven't had any successful tests yet. I don't own any boards that old..... comparing it to the few existing mods I can find it should be OK. Let me know if you do any :D

Let me know if you come accross any issues - anything at all. I hope it should be issue free now! I will leave it beta a little while longer to make sure. Always happy to Ix.

Andy

[andyp]

I have added a 'Verify' button to the latest version that will just check the 3 checksums for the specified BIOS. Nothing is changed.

Hope this is useful.

Andy

[p4spooky]

I have added a 'Verify' button to the latest version that will just check the 3 checksums for the specified BIOS. Nothing is changed.

Hope this is useful.

Andy

Very nice Andy. I have not seen any real issues since 0.94 that has the parsing error on 1B module on newer Asus P6T boards. Other than that no major issues. Great job :D

[ugur-ugur]

Please try this (HP Slic): http://www.box.net/shared/2dffolqn0t

Report back please.

Thank You but did not not :(

http://img209.imageshack.us/img209/8070/acpiscopeqo1.jpg (http://imageshack.us)
http://img209.imageshack.us/img209/acpiscopeqo1.jpg/1/w637.png (http://g.imageshack.us/img209/acpiscopeqo1.jpg/1/)

[GraceSlic]

Is already modded and tested see the thread All Slics...

KA790GX (MS-7551) - ver. 1.1 : AMI
SLIC : MSI mod 911medic, tested Dyasan
http://slics.myftp.org/7551v11_MSI_SLIC.rar
Flash from DOS with AFUDOS..No switches. clear cmos and load defaults post flash..

KA790GX - ver. 7571v13 : AMI
SLIC=MSI mod 911medic, tested surrgon
http://slics.myftp.org/7551v13_MSI_SLIC.rar
Flash from DOS with AFUDOS..No switches. Clear cmos and load defaults


- Motherboard Manufacturer And Model : MSI KA790GX (MS-7551)
- Bios Revision : 1.0
- Bios Type : AMI
- Bios SLIC : HP
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7551v10.zip

Please,need your help.

[andyp]

Thank You but did not not :(

Are you sure you flashed the SLIC'd BIOS from the zip file and not the original. The SLIC your image shows seems to be the dynamically allocated original one. The mod looks good in a hex editor.

How did you flash?

Andy

[p4spooky]

Thank You but did not not :(

http://img209.imageshack.us/img209/8070/acpiscopeqo1.jpg (http://imageshack.us)
http://img209.imageshack.us/img209/acpiscopeqo1.jpg/1/w637.png (http://g.imageshack.us/img209/acpiscopeqo1.jpg/1/)

Sorry about this. I checked the mod again and it looks correct. Please confirm how you flashed.

Thanks

[911medic]

Thank You but did not not :(



Be sure to Clear cmos and load defaults after flash. Whether you flash original first or not. After final flash, this should be done.

[Bonalizaa]

Hi I have new M\B MSI X58 Platinum with i7

can someone try to mod BIOS for me please .....

This link for Original BIOS-->http://download2.msi.com.tw/files/downloads/bos_exe/7522v11.zip

BIOS Type : AMI
slic : MSI

Thank...a lot...

someone please.............

[andyp]

someone please.............

Try this - http://drop.io/fgnkzwj

Ensure all soft-mods removed
Flash unmodified BIOS first
Then flash from SLIC'd BIOS from DOS
Clear CMOS

Feedback please!

Cheers
Andy

[BAU]

-Edited-
Original HU model bios (VR220X-010H) that came without Windows did not work with OEMCertAutoInstaller featuring proper OEM key, this was the reason for the request.
I tought that the bios upgrade from msi site is the same, but it turns out that it includes a proper SLIC so I can activate, at least with ASUS OEM (Ultimate) key.
Request removed.

[911medic]

MSI VR220-YA
MB: Intel® GL40+ICH9M Chipset
BIOS: http://global.msi.com.tw/index.php?func=downloadfile&dno=7492&type=bios

Is it possible to modify this one?

Yep..I will have it up soon..MSI SLIC ok??

[JoeLatino]

Hi I have new M\B MSI X58 Eclipse with i7

Please can you mod BIOS for me? Thanks

This link for Original BIOS-->http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1695

BIOS Type : AMI 7520v12.zip

[RedBean]

Hi, just wondering if someone can mod the BIOS for my motherboard.

Motherboard: MSI P43 Neo3-F 1.0 (MS-7514)
- Bios revision: 1.6
- Bios Type : AMI
- Bios SLIC : MSI
- Bios Link = http://download2.msi.com.tw/files/downloads/bos_exe/7514v16.zip

Thanks in advance.

[andyp]

Hi I have new M\B MSI X58 Eclipse with i7

Please can you mod BIOS for me? Thanks

This link for Original BIOS-->http://global.msi.com.tw/index.php?f...1&prod_no=1695

BIOS Type : AMI 7520v12.zip

Hi, just wondering if someone can mod the BIOS for my motherboard.

Motherboard: MSI P43 Neo3-F 1.0 (MS-7514)
- Bios revision: 1.6
- Bios Type : AMI
- Bios SLIC : MSI
- Bios Link = http://download2.msi.com.tw/files/downloads/bos_exe/7514v16.zip

Thanks in advance.

I have put 7520v12.zip here - http://drop.io/rxerom5
and 7514v16.zip here - http://drop.io/9npyeab

** Updated locations **

JoeLatino - There were no links on that page - I got it from http://download2.msi.com.tw/files/downloads/bos_exe/7520v12.zip - please ensure this is correct.

Remove any soft-mods
Flash original unmodified BIOS first
Then flash SLIC'd BIOS from DOS.
Reset CMOS

Feedback please.

Thanks
Andy

[RedBean]

I have put both here - http://drop.io/rxerom5

JoeLatino - There were no links on that page - I got it from http://download2.msi.com.tw/files/downloads/bos_exe/7520v12.zip - please ensure this is correct.

Remove any soft-mods
Flash original unmodified BIOS first
Then flash SLIC'd BIOS from DOS.
Reset CMOS

Feedback please.

Thanks
Andy

Thanks Andy! BIOS flashed fine and there is now an SLIC entry. I'm going to try installing Vista now and see if everything worked okay.

[Bonalizaa]

Try this - http://drop.io/fgnkzwj

Ensure all soft-mods removed
Flash unmodified BIOS first
Then flash from SLIC'd BIOS from DOS
Clear CMOS

Feedback please!

Cheers
Andy


Hi ,Andy i come to send you a feed back....
that not work system has say "warning!! ROMID Dismatch"

Please try this again please ...

ps. sorry to late feedback i have a lot of workS...

Thankyou ..............:)

[andyp]

Hi ,Andy i come to send you a feed back....
that not work system has say "warning!! ROMID Dismatch"

Please try this again please ...

ps. sorry to late feedback i have a lot of workS...

Thankyou ..............:)

I have just checked it in a hex editor and it all looks sound.

Silly question - are you sure this is the right BIOS for your board (just checking you have the X58 Platinum and not the X58 Platinum SLI as they seem to have different BIOSes)?
Have you flashed the non-modded BIOS first?
How did you try and flash the SLIC BIOS (ie dos/windows/ezflash etc.)

Thanks
Andy

[JoeLatino]

I have put 7520v12.zip here - http://drop.io/rxerom5
and 7514v16.zip here - http://drop.io/9npyeab

** Updated locations **

JoeLatino - There were no links on that page - I got it from http://download2.msi.com.tw/files/downloads/bos_exe/7520v12.zip - please ensure this is correct.

Feedback please.

Thanks
Andy

HI!
Bios is ok i read slic'bios good but i have an problem:
ProductID: ----------- 89587-OEM-7332132-00031

Product Key: --------- 6F2D7-2PCG6-YQQTB-FWK9V-932CC

-------------------------------------------------------

Additional details provided by Extra300


Name: Windows(TM) Vista, Ultimate edition
Description: Windows Operating System - Vista, OEM_SLP channel
Partial Product Key: 932CC
License Status: Initial grace period
Time remaining: 35280 minute(s) (24 day(s))

i have used Vista Oem Installer for Slic Supported Bios v1.5,but activation dont work, why?

thanks a lot

[andyp]

HI!
Bios is ok i read slic'bios good but i have an problem:
ProductID: ----------- 89587-OEM-7332132-00031

Product Key: --------- 6F2D7-2PCG6-YQQTB-FWK9V-932CC

-------------------------------------------------------

Additional details provided by Extra300


Name: Windows(TM) Vista, Ultimate edition
Description: Windows Operating System - Vista, OEM_SLP channel
Partial Product Key: 932CC
License Status: Initial grace period
Time remaining: 35280 minute(s) (24 day(s))

i have used Vista Oem Installer for Slic Supported Bios v1.5,but activation dont work, why?

thanks a lot

SLIC was MSI as you didn't specifically request one. I think that is the ASUS product key. You can use the MSI certificate and key - see first post or I can do an ASUS one for you.

Andy

[JoeLatino]

SLIC was MSI as you didn't specifically request one. I think that is the ASUS product key. You can use the MSI certificate and key - see first post or I can do an ASUS one for you.

Andy

yes thanks
ps can you give me an serial/mode for MSI? where i can found it?

ok i have already found and it work thanks!!

[JoeLatino]

please can you make MSI slic bios for this?
http://www.mediafire.com/file/1nzykljimm1/A7520IMS.141.rar
thanks:)

[911medic]

please can you make MSI slic bios for this?
http://www.mediafire.com/file/1nzykljimm1/A7520IMS.141.rar
thanks:)

MSI SLIC = http://slics.myftp.org/MSI_A7520IMS.141_SLIC.rar

Flash from DOS with no switches. Clear cmos and load defaults after flash.

Feedback please!!

[deploypenguins]

Motherboard Manufacturer And Model : MSI DKA790GX
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7550v16.zip

I was hoping someone could mod this one with an ASUS SLIC for me? Thanks you all so much!

[911medic]

Motherboard Manufacturer And Model : MSI DKA790GX
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7550v16.zip

I was hoping someone could mod this one with an ASUS SLIC for me? Thanks you all so much!

ASUS SLIC = http://slics.myftp.org/MSI_7550v16_ASUS_SLIC.rar

Flash from dos with afudos an no switches. Clear cmos and load defaults after flash.

Feedback please!!!

[ymymaster]

Please modify this BIOS:
http://global.msi.com.tw/index.php?func=downloadfile&dno=9060&type=bios
BIOS Type: AMI
Model: P45 / G45 / P43 Neo3
Version: 1.7
Date of Release: 10.02.2009
Thanks.

[johnalvin]

Please modify this BIOS:
http://global.msi.com.tw/index.php?func=downloadfile&dno=9060&type=bios
BIOS Type: AMI
Model: P45 / G45 / P43 Neo3
Version: 1.7
Date of Release: 10.02.2009
Thanks.

hi,

you can try this

slic:asus

http://www.divshare.com/download/6609731-3cf

Flash from DOS with no switches. Clear cmos and load defaults after flash.

[ymymaster]

hi,

you can try this

slic:asus

http://www.divshare.com/download/6609731-3cf

Flash from DOS with no switches. Clear cmos and load defaults after flash.
OK. Vista sp1 activated. Thanks.

[johnalvin]

OK. Vista sp1 activated. Thanks.

you're welcome and thanks for the feedback, enjoy:D


Model: P45 / G45 / P43 Neo3
Version: 1.7
Date of Release: 10.02.2009

slic:asus

link to modded bios

http://www.divshare.com/download/6609731-3cf

[JoeLatino]

MSI SLIC = http://slics.myftp.org/MSI_A7520IMS.141_SLIC.rar

Flash from DOS with no switches. Clear cmos and load defaults after flash.

Feedback please!!

it's perfect!! thank you very much:)

[WarriorCZ]

- Motherboard Manufacturer And Model : MSI G31M3-F
- Bios Revision : 1.2
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7528v12.zip

Thanks for your help!

[911medic]

- Motherboard Manufacturer And Model : MSI G31M3-F
- Bios Revision : 1.2
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7528v12.zip

Thanks for your help!

DELL SLIC = http://slics.myftp.org/7528v12_DELL_SLIC.rar
Flash from DOS with AFUDOS. No switches
Clear cmos and load defaults after flash

Feedback please!!

[klaasw]

Could someone help me out with this BIOS?

- Motherboard Manufacter And Model : MSI G45M (MS-7521)
- Bios Revision : 1.2
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8822&type=bios

[911medic]

Could someone help me out with this BIOS?

- Motherboard Manufacter And Model : MSI G45M (MS-7521)
- Bios Revision : 1.2
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://global.msi.com.tw/index.php?func=downloadfile&dno=8822&type=bios

I used the tool, adjusted some options, and this should work. If not I will manually mod one, that will take some time.

DELL SLIC/SLP = http://slics.myftp.org/DELL_MSI_SLIC_7521v12.rar

Flash with AFUDOS /iA7521IMS.120. No other switches

Clear cmos and load defaults after flash..

[klaasw]

Thanks for your help 911medic!

But unfortunately this bios does not work. After clearing cmos the system seemed to start ok (no beeps) but there was no video output.

I used the tool, adjusted some options, and this should work. If not I will manually mod one, that will take some time.

DELL SLIC/SLP = http://slics.myftp.org/DELL_MSI_SLIC_7521v12.rar

Flash with AFUDOS /iA7521IMS.120. No other switches

Clear cmos and load defaults after flash..

[911medic]

Thanks for your help 911medic!

But unfortunately this bios does not work. After clearing cmos the system seemed to start ok (no beeps) but there was no video output.

DELL SLIC = http://slics.myftp.org/MSI_7521v12_DELL_SLIC.rar

Manual mod. Flash the original, clear cmos, load defaults, then flash with no switches. Clear cmos and load defaults after flash.

Feedback please!!

[klaasw]

This BIOS works perfectly. Thanks!

DELL SLIC = http://slics.myftp.org/MSI_7521v12_DELL_SLIC.rar

Manual mod. Flash the original, clear cmos, load defaults, then flash with no switches. Clear cmos and load defaults after flash.

Feedback please!!

[911medic]

Could someone help me out with this BIOS?

- Motherboard Manufacter And Model : MSI G45M (MS-7521)
- Bios Revision : 1.2
- Bios Type : AMI
- Bios SLIC : DELL

http://slics.myftp.org/MSI_7521v12_DELL_SLIC.rar
This BIOS works perfectly. Thanks!

Very nice, now we need to know why the tool did not work well. :eek:

Thanks for the feedback, and your confidence!!

[Bonalizaa]

I have just checked it in a hex editor and it all looks sound.

Silly question - are you sure this is the right BIOS for your board (just checking you have the X58 Platinum and not the X58 Platinum SLI as they seem to have different BIOSes)?
Have you flashed the non-modded BIOS first?
How did you try and flash the SLIC BIOS (ie dos/windows/ezflash etc.)

Thanks
Andy


Hi, Andy very sorry for very very late...

Now that work.....well!!

thank for you SLIC's BIOS I come for confirm this BIOS

ps. i'm not good for English but ithink you understand my word...

thankyou again...!!!:):p

[p4spooky]

Medic: Need your help for a manual mod :D

- Motherboard Manufacter And Model : MSI P45 Platinum (MS7512)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download2.msi.com.tw/files/downloads/bos_exe/7512v16.zip

Thanks, will provide feedback

[911medic]

Medic: Need your help for a manual mod :D

- Motherboard Manufacter And Model : MSI P45 Platinum (MS7512)
- Bios Revision : 1.6
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download2.msi.com.tw/files/downloads/bos_exe/7512v16.zip

Thanks, will provide feedback

ASUS SLIC = http://slics.myftp.org/7512v16_ASUS_SLIC.rar

Flash from DOS with no switches..Enjoy:D

[p4spooky]

ASUS SLIC = http://slics.myftp.org/7512v16_ASUS_SLIC.rar

Flash from DOS with no switches..Enjoy:D

Medic: Happy to report Vista x64 Ultimate activated - ZERO issues.

Thanks again for your help :D

[911medic]

Medic: Happy to report Vista x64 Ultimate activated - ZERO issues.

Thanks again for your help :D

My favorite part.....ZERO issues..:D

Thanks for the confidence!!

[arnt2]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P35 Neo3
- Bios Revision : 1.4
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7395v14.zip

Thanks for your help

[p4spooky]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P35 Neo3
- Bios Revision : 1.4
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7395v14.zip

Thanks for your help

Please try this (SSV2 Mod): http://www.box.net/shared/5vry3xcm27

Report back please :D

[random_sam]

Please mod this BIOS for me

Motherboard Manufacturer And Model : MSI 645 Ultra (MS-6547 Ver1)
- Bios Revision : 1.9
- Bios Type : AMI
- Bios SLIC : DELL
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/6547v19.exe

Thanks for your help

[arnt2]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P35 Neo3
- Bios Revision : 1.4
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7395v14.zip

Thanks for your help

Please try this (SSV2 Mod): http://www.box.net/shared/5vry3xcm27

Report back please :D

Works like a charm! Vista activated.
Thank you very much for your excellent job

[jhanner]

- Motherboard Manufacter And Model : MSI K9A2GM-FIH (MS-7501)
- Bios Revision : 1.6
- Bios Update date: 01/21/2009
- Bios Type : AMI
- Download Link : http://download2.msi.com.tw/files/downloads/bos_exe/7501v16.zip

Please help mod the latest release of the factory bios for the MSI K9A2GM-FIH motherboard. This is v1.6 released on O1/21/2009.

Thank you very much for your help.

[jhanner]

Forgot to include in my request:

- Bios SLIC : ASUS

[p4spooky]

- Motherboard Manufacter And Model : MSI K9A2GM-FIH (MS-7501)
- Bios Revision : 1.6
- Bios Update date: 01/21/2009
- Bios Type : AMI
- Download Link : http://download2.msi.com.tw/files/downloads/bos_exe/7501v16.zip

Please help mod the latest release of the factory bios for the MSI K9A2GM-FIH motherboard. This is v1.6 released on O1/21/2009.

Thank you very much for your help.

Please try this: http://www.box.net/shared/86h06ri11r

Flash from DOS ONLY, clear CMOS and load defaults after flash.

Report back please :D

[jhanner]

-Motherboard Manufacturer and Model : Foxconn A74MX-K
- Bios revision: 813F1P06, dated 3-7-2009 (or earlier)
- Bios Type : AMI
- Bios SLIC : ASUS
- Bios Link = http://www.foxconnchannel.com/support/downloads_detail.aspx?ID=en-us0002473 (CLICK "Download")

I am not sure where on this forum to post a request for Foxconn mods, but as this motherboard has an AMI bios, I am hoping I can get some help in this MSI-AMI area.

Please help me mod the Foxconn A74MX-K with bios update 13F1P06 dated 3-7-2009, or any other earlier bios update for this Foxconn board.

I can't find many SLIC mods for any Foxconn motherboards, and none for this one.

If I posted this request in the wrong area of the forum, my apologies, and please direct me to where on the forum I should post this request.

Thank you very much for your help.

[jhanner]

Please try this: http://www.box.net/shared/86h06ri11r

Flash from DOS ONLY, clear CMOS and load defaults after flash.

Report back please :D
Thanks for you quick reply, p4spooky, about my MSI K9A2GM-FIH (MS-7501) request. This seems to be the exact mod I need! I will report back with my results soon.

[andyp]

-Motherboard Manufacturer and Model : Foxconn A74MX-K
- Bios revision: 813F1P06, dated 3-7-2009 (or earlier)
- Bios Type : AMI
- Bios SLIC : ASUS
- Bios Link = http://www.foxconnchannel.com/support/downloads_detail.aspx?ID=en-us0002473 (CLICK "Download")

I am not sure where on this forum to post a request for Foxconn mods, but as this motherboard has an AMI bios, I am hoping I can get some help in this MSI-AMI area.

Please help me mod the Foxconn A74MX-K with bios update 13F1P06 dated 3-7-2009, or any other earlier bios update for this Foxconn board.

I can't find many SLIC mods for any Foxconn motherboards, and none for this one.

If I posted this request in the wrong area of the forum, my apologies, and please direct me to where on the forum I should post this request.

Thank you very much for your help.

You have already posted in the correct thread. I have done one for you there.
Andy

[BlueE]

Hello
I would like to request mod for this (old) bios, or some pointers on how to do it myself:

Motherboard Manufacter And Model : MSI KT6 Delta Fis2r (MS-6590)
- Bios Revision : 5.7
- Bios Update date: 2004-11-01
- Bios Type : AMI
- Download Link :http://download1.msi.com.tw/files/downloads/bos_exe/6590v57.zip

I've tried it myself with slictool100rc7, but it bricked the bios.
Also tried Ami_Slic3 but got an "can't ectract 1b module".

Any help would be appreciated.

[andyp]

Hello
I would like to request mod for this (old) bios, or some pointers on how to do it myself:

Motherboard Manufacter And Model : MSI KT6 Delta Fis2r (MS-6590)
- Bios Revision : 5.7
- Bios Update date: 2004-11-01
- Bios Type : AMI
- Download Link :http://download1.msi.com.tw/files/downloads/bos_exe/6590v57.zip

I've tried it myself with slictool100rc7, but it bricked the bios.
Also tried Ami_Slic3 but got an "can't ectract 1b module".

Any help would be appreciated.

This is a core v7 BIOS so AMI_SLIC3 won't work. Core 6/7 support in SLICTool is experimental - purely because not many people have boards this old!

When you say bricked - what exactly happened. Have you been able to recover?

There is not really such a thing as an SSV2 for Core 7 so this might be difficult. Although, perhaps there is no reason why there shouldn't be.....

Andy

[BlueE]

This is a core v7 BIOS so AMI_SLIC3 won't work. Core 6/7 support in SLICTool is experimental - purely because not many people have boards this old!

When you say bricked - what exactly happened. Have you been able to recover?

There is not really such a thing as an SSV2 for Core 7 so this might be difficult. Although, perhaps there is no reason why there shouldn't be.....

Andy

Thanx for your reply,
Slictool gave no errors, I got a rom file the same size as the original.
Used the original flash utility, and flashed it without errors.
Restart didn't work, the Ami buildin recovery tried to read from A: and gave some beeps.

So it might be possible but not with a tool, maybe by hand?
Is there a thread here on how to manually do this?
I have searched a bit on this forum, but there are so much threads and posts, just can't find the time to read it al.

[911medic]

Thanx for your reply, I've been able to recover the bios with the build-in Ami recovery from floppy.

So it might be possible but not with a tool, maybe by hand?
Is there a thread here on how to manually do this?
I have searched a bit on this forum, but there are so much threads and posts, just can't find the time to read it al.

Maybe by hand. No tutorial though. I will look at it shortly, but can't make any promises..:D

[BlueE]

Maybe by hand. No tutorial though. I will look at it shortly, but can't make any promises..:D

No problem, just give it a look.
If u say it's to hard, I'll let it be.

Thanx!

[andyp]

Thanx for your reply,
Slictool gave no errors, I got a rom file the same size as the original.
Used the original flash utility, and flashed it without errors.
Restart didn't work, the Ami buildin recovery tried to read from A: and gave some beeps.

So it might be possible but not with a tool, maybe by hand?
Is there a thread here on how to manually do this?
I have searched a bit on this forum, but there are so much threads and posts, just can't find the time to read it al.

Yen has some experience with these. I will post the picture he showed me illustrating the changes. Basically the 0F module does not contain the ACPI tables, it contains code to construct the ACPI tables. Load 0F.BIN and 0F_SLIC.BIN into Ida pro or the disassembler of your choice and see what's happening. I am reasonably happy that the code changes are OK.

We know that current MSI boards do not like the changes caused by the AMI tools to insert modules - hence the SSV2 method. I don't know how relevant this is for older boards - I am sure core 7 MSI boards have been done this SSV1 way before.

Firstly it is worth 911medic and the other modders to have a look at what I have done (via the tool) and to get their opinions...... I don't think Yen is back for a while. I can try and do an SSV2 type mod by nopping bits of apparently unused code but it must be conisdered VERY risky........

Edit: Pics added. Unfortunately it is not just a case of pattern matching. Dissassemble the code and it will make sense..... although I still don't understand why it is not working!

Edit: I MAY HAVE FOUND THE PROBLEM - please try http://drop.io/8rkrjop - nothing to do with above - may be a module checksum issue

Andy

[BlueE]

Very nice, I'll give it a try tomorrow.

I was just about to ask if I could put the 0F module and the 23 module (slic) into the original rom with amibcp. Or would that have been to easy :confused:
Reading hex and assembly are not my strong points :D

[BlueE]

Edit: I MAY HAVE FOUND THE PROBLEM - please try http://drop.io/8rkrjop - nothing to do with above - may be a module checksum issue
Andy

I'm sorry andyp, it didn't work.
I even had to reset the cmos before I could force Amiboot to recover.

I think I will have to live with softmod or no pre-activation at all.

Thanx anyway!

[andyp]

I'm sorry andyp, it didn't work.
I even had to reset the cmos before I could force Amiboot to recover.

I think I will have to live with softmod or no pre-activation at all.

Thanx anyway!

Hi

I have identified another potential problem/solution - I wasn't reupdating the SLIC offset in RSDT if the insertion of 0F altered the offset - if happy then get new file from http://drop.io/8rkrjop (end in SLIC2).

I have done it through manually as well and it compares.

Andy

[BlueE]

Hi

I have identified another potential problem/solution - I wasn't reupdating the SLIC offset in RSDT if the insertion of 0F altered the offset - if happy then get new file from http://drop.io/8rkrjop (end in SLIC2).

I have done it through manually as well and it compares.

Andy

Sorry still no luck, could I try another flash utility?

[andyp]

Sorry still no luck, could I try another flash utility?

How are you flashing currently?
Andy

[BlueE]

How are you flashing currently?
Andy

I'm using Ami Flash 7.00.09 supplied with the bios.
Have tried using with and without the -B parameter.

[andyp]

For information....

Before

seg000:9404 sub_9404 proc near ; CODE XREF: seg000:9400
seg000:9404 push eax
seg000:9406 push cs
seg000:9407 pop es
seg000:9408 mov edi, 120h
seg000:940E rep movs byte ptr es:[edi], byte ptr [esi]
seg000:9411 push cs
seg000:9412 pop ds
seg000:9413 xor esi, esi
seg000:9416 xor edi, edi
seg000:9419 mov cs:dword_0, 54445352h ; RSDT
seg000:9423 mov cs:byte_8, 1
seg000:9429 mov cs:dword_4, 2Ch ; ','
seg000:9433 call sub_978D
seg000:9436 jnz short loc_9442
seg000:9438 mov cs:dword_4, 28h ; '('
seg000:9442
seg000:9442 loc_9442:
seg000:9442 mov cs:dword_A, 49494D41h
seg000:944C mov cs:word_E, 544Eh
seg000:9453 mov cs:dword_10, 5F414956h
seg000:945D mov cs:dword_14, 2020374Bh
seg000:9467 mov cs:dword_1C, 5446534Dh
seg000:9471 mov cs:dword_20, 97h ; 'ù'
seg000:947B mov cs:dword_18, 10h
seg000:9485 mov cs:dword_30, 50434146h ; FACP


After

seg000:9404 sub_9404 proc near ; CODE XREF: seg000:9400
seg000:9404 push eax
seg000:9406 push cs
seg000:9407 pop es
seg000:9408 mov edi, 120h
seg000:940E rep movs byte ptr es:[edi], byte ptr [esi]
seg000:9411 push cs
seg000:9412 pop ds
seg000:9413 xor esi, esi
seg000:9416 xor edi, edi
seg000:9419 mov cs:dword_0, 54445352h ; RSDT
seg000:9423 mov cs:byte_8, 1
seg000:9429 mov cs:dword_4, 30h ; '0' Increased size by +4
seg000:9433 call sub_978D
seg000:9436 nop
seg000:9437 nop
seg000:9438 mov cs:dword_2C, 0FFF805A2h ; SLIC offset
seg000:9442 mov cs:dword_A, 5553415Fh ; _ASU
seg000:944C mov cs:word_E, 5F53h ; S_
seg000:9453 mov cs:dword_10, 65746F4Eh ; NOTE
seg000:945D mov cs:dword_14, 6B6F6F62h ; BOOK
seg000:9467 mov cs:dword_1C, 5446534Dh ; MSFT (unchanged)
seg000:9471 mov cs:dword_20, 97h ; 'ù'
seg000:947B mov cs:dword_18, 10h
seg000:9485 mov cs:dword_30, 50434146h ; FACP


The only thing I note is that for all core 8 mods the SLIC offset is put at 2Ch and not 30h (but Yen's pics show 30h). The ACPI spec implies it could be either..... it might be worth a try at 2Ch.......

Andy

[andyp]

I'm using Ami Flash 7.00.09 supplied with the bios.
Have tried using with and without the -B parameter.

Shouldn't need to flash the bootblock. It doesn't change. Looking at the command line options I would suggest -B C R although I doubt it will make too much difference.

Andy

[arnt2]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P45 Neo3-FR (PCB 1.0)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7514v17.zip

Thanks for your help

[911medic]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P45 Neo3-FR (PCB 1.0)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7514v17.zip

Thanks for your help

ASUS SLIC = http://slics.myftp.org/7514v17_ASUS_SLIC.rar

Flash from DOS with AFUDOS. No Switches. Clear cmos and load defaults after flash..

Feedback please!!

[arnt2]

Please mod this BIOS for me

Motherboard Manufacturer And Model : P45 Neo3-FR (PCB 1.0)
- Bios Revision : 1.7
- Bios Type : AMI
- Bios SLIC : ASUS
- Download Link : http://download1.msi.com.tw/files/downloads/bos_exe/7514v17.zip

Thanks for your help

ASUS SLIC = http://slics.myftp.org/7514v17_ASUS_SLIC.rar

Flash from DOS with AFUDOS. No Switches. Clear cmos and load defaults after flash..

Feedback please!!

Works like a charm! Vista activated.
Thank you very much for your excellent job

[andyp]

Sorry still no luck, could I try another flash utility?

Could you post an ACPIScope report

Load ACPIScope
Select File -> Load ACPI Information -> From BIOS
Then Save As something.ATS

and upload that file

I just want to see how the RSDT table is populated
Andy

[Pyotr]

hallo
could somebady help me please?


- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.4
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link :http://download1.msi.com/files/downloads/bos_exe/7374v34.zip

thanks

[p4spooky]

hallo
could somebady help me please?


- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.4
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link :http://download1.msi.com/files/downloads/bos_exe/7374v34.zip

thanks

Please try this (SSV2/MSI Slic): http://www.box.net/shared/uvsprkfiut

Report back please :D

[BlueE]

Could you post an ACPIScope report

Load ACPIScope
Select File -> Load ACPI Information -> From BIOS
Then Save As something.ATS

and upload that file

I just want to see how the RSDT table is populated
Andy

Here is the ascpiscope:
http://www.megaupload.com/?d=FD5JKLZ1

So you wanna give it another go? :).
I'll keep my fingers crossed!

[Pyotr]

hallo
could somebady help me please?


- Motherboard Manufacturer And Model : MSI K9N2 SLI Platinum
- Bios Revision : 3.4
- Bios Type : AMI
- Bios SLIC : MSI if possibile
- Download Link :http://download1.msi.com/files/downloads/bos_exe/7374v34.zip

thanks

Please try this (SSV2/MSI Slic): http://www.box.net/shared/uvsprkfiut

Report back please :D

vista activated !!!
thank you very much!

[vladee]

Hello,

Could someone please mod this bios.

http://download2.msi.com/files/downloads/bos_exe/7357v13.zip

I'm a noob to this kind of things.

Thank you in advance