Phoenix bios SLIC mod requests (*.WPH or *.ROM files).

[911medic]

Thanks... that was fast!!

Unfortunately when I ran FlashAid with the modded .ROM file that you made it returned an error: "The specified BIOS data file is corrupt or is a format that cannot be used by this program. Please specify the correct BIOS data file for this model." I don't get this error with the original .ROM file....

Maybe the BIOSHeader.ini needs to be updated also?

Also there was no files in the Cert directory in the .rar?

Thanks,
Tim

I think the Winflash is not the best for this..Let me upload you another pack with phlash to use from DOS..

EDIT:

This package has the cert and phlash17 for dos. There are instructions in the folders..

http://slics5.myftp.org/biosFiles/Fujitsu_T1010_SLIC_2.1_cert.rar

[markorlando]

It's called FUJITSU.XRM-MS, right?

-Mark

[markorlando]

Thanks.. where should I get phlash? Is it safe to use on Fujitsu systems? Do I have to boot into DOS or can I run from a Vista command prompt?

Thanks again!

[911medic]

Thanks.. where should I get phlash? Is it safe to use on Fujitsu systems? Do I have to boot into DOS or can I run from a Vista command prompt?

Thanks again!

It is in the post I edited..PURE DOS. not from command prompt..that is not DOS....:cool:

[SumitB]

Requesting a mod for SLIC2.1 for HP for my HP Laptop V6219TU.

The BIOS can be downloaded here (ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42187.exe)

The BIOS is in WPH format and is a Phoenix BIOS.

It already has SLIC2.0 for HP and Vista is activated and runs fine on it. Now I want to install Windows 7 and need the 2.1 SLIC for it.

Thanks in advance

Regards
Sumit

[markorlando]

Thanks for the phlash version.

So I downloaded, renamed the BIOSData.ROM to BIOS.ROM, copied the files to a small FAT32 partition on my HD, rebooted in DOS from a floppy and ran "PH161700.EXE BIOS.ROM /O /Force /X /C /S" and got the following when I ran it:

Phoenix Phlash16 Error
Invalid FlashInt.Bin !

PRESS ANY KEY TO EXIT

Any suggestions? I'm not sure what to do next...

Thanks again,
Mark

[SEP800]

Busykid508,

Any chance you could upload this to a different file host?

slics.myftp.org isn't available...

Thanks!


Just for your information, this was modified with ACER SLIC 2.1 right from the beginning....

Your caution with messages of warning will probably prevent you from flashing your bios even with this new modified slic which I am providing in the download link below.

So, I feel that I am wasting my time here with your particular case but here it is for you and so, my question is, What are you going to do with it?

-Manufacturer: ACER
-Motherboard Model: Travelmate 6292
-Bios revision: 3601
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_6292/vista/BIOS/3601.zip
-Winflash and PHLASH16 are Included in Flash Tools - Use PHLASH16 to flash Bios in DOS using Bootable USB Flash Drive. Rename ZU1_3601_SLIC.WPH to ZU1_3601.WPH and at command prompt, type: PHLASH16 ZU1_3601.WPH /mode=3 /S
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACRSYSACRPRDCT Certificate Included
-Tool: Phoenix Mod Tool v0.028
-Method: SSV2 - Default Settings
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

ACER_Travelmate_6292-ACER-3601-ACRSYSACRPRDCT-ANNI.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//ACER_Travelmate_6292-ACER-3601.rar

[jet29]

Can u provide slic 2.1 for fujitsu siemens amilo li 2735

-Motherboard Manufacturer and Model : fujitsu siemens amilo li 2735
-Bios Revision : 1.10
-Bios Type : phoenix
-Bios SLIC : slic 2
-Bios Link : http://www.mediafire.com/?mmnmmz4ynkm

acpi table: http://www.mediafire.com/?hwjhzjezy4m

Thanks and look forward to hearing from you.

[Busykid508]

Can u provide slic 2.1 for fujitsu siemens amilo li 2735

-Motherboard Manufacturer and Model : fujitsu siemens amilo li 2735
-Bios Revision : 1.10
-Bios Type : phoenix
-Bios SLIC : slic 2
-Bios Link : http://www.mediafire.com/?mmnmmz4ynkm

acpi table: http://www.mediafire.com/?hwjhzjezy4m

Thanks and look forward to hearing from you.

You had version 1.10 for the bios but fijitsu-siemens has your computer motherboard as v1.23.....I used v1.23.

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: amilo li 2735
-Bios revision: 1.23
-Bios Type: Phoenix BIOS
-Bios Download Link: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=99BE856D-C22A-4824-A230-05E0A9DE2DA0&FileFolder=Downloadfiles&FileTypeExtension=EXE&FileNameClient=FTS_BIOSWindowsFlash32bitWinflashAM ILOLi273x_110_1037102.EXE&FileSize=1294069&From=Tm9tYFxoQWRnYE9qPW1qcm5gbSIr
-Source of Bios Download Link: http://support.ts.fujitsu.com/com/support/downloads.html
-Winflash Bios Update Tool Included - Flash BIOS in Winflash (Located in Win Folder) but rename V110_SLIC.EXE to V110.EXE before flashing bios in windows. Follow on-screen instructions.
-SLIC: Fujitsu[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: Fijitsu
-Fijitsu Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included


Fujitsu-Siemens_Amilo_XI_2735_Fujitsu-Siemens-1.23-Fujitsu[FUJ-PC-FUJ]2.1.BIN_SLIC21_Fujitsu_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Amilo_XI_2735_Fujitsu-Siemens-1.23.rar

[Busykid508]

Busykid508,

Any chance you could upload this to a different file host?

slics.myftp.org isn't available...

Thanks!

It is working now...

[Busykid508]

Requesting a mod for SLIC2.1 for HP for my HP Laptop V6219TU.

The BIOS can be downloaded here (ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42187.exe)

The BIOS is in WPH format and is a Phoenix BIOS.

It already has SLIC2.0 for HP and Vista is activated and runs fine on it. Now I want to install Windows 7 and need the 2.1 SLIC for it.

Thanks in advance

Regards
Sumit

You need to pay attention to the rules....the rules say that you are to provide an RW Everything report and you did not and so, you have not.....

Please follow directions below

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

Busykid508,

Any chance you could upload this to a different file host?

slics.myftp.org isn't available...

Thanks!

It is working now..

[wolf69]

Ok i know this is probally a long shot But is it possible to to mod a phoenix bios off a dell if its been extracted?

Yes, it can

[jse]

I am reposting this request with an RW report (thanks to RW:s creator Jeff for helping me out with the access exception errors).

-Motherboard Manufacturer and Model: Fujitsu Lifebook E8210 (ATI-Graphics)
-Bios Revision: 1.23
-Bios Type: Phoenix
-Bios SLIC: unknown, suitable 2.1 wanted, for Vista And W7
-Bios Link: http://www.mediafire.com/?nyrtjdjmbwq
-Complete extracted bios diskette image: http://www.mediafire.com/?2mjgrumvynd

-Rw-everything report: http://www.mediafire.com/?tkwggmz13wx


Thanks,
/Johan

[monalac]

Can someone post modified BIOS for my laptop for Windows 7?
Laptop Manufacturer: HP
Model No.: HP PAVILLION TX1301AU
BIOS LINK FOR DOWNLOAD: http://rapidshare.com/files/274855851/sp39359.exe.html
Bios type: Phoenix

Please someone give me modified SLIC BIOS...

Also will the bios be flashed automatically by running .exe bios file?

[NoName4ever]

Give it about 10 minutes to finish uploading to the server

-Manufacturer: CLEVO
-Motherboard Model: M57xRU
-Bios revision: 1.00.12
-Bios Type: Phoenix BIOS
-Bios Download Link: http://download658.mediafire.com/9uuniyctxnzg/zjjmyd0n5ym/BIOS_17.zip
-Secondary Download Link: ftp://sftp.clevo.com.tw/ALLBIOS/M57xTU/BIOS_17.zip
-PHLASH16 BIOS UPDATE UTLITIES INCLUDED - Flash Bios in DOS Using PHLAHS16 and BOOTABLE USB Flash Drive - Rename 57RU_11_SLIC.WPH to 57RU_11.WPH and at command prompt in DOS, type: phlash16 /x /c /mfg /mode=3 57RU_11.WPH
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.030
-Method: SSV2 - Ticked Only Replace SLIC Elements of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

CLEVO_M57xRU-CLEVO-1.00.12-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//CLEVO_M57xRU-CLEVO-1.00.12.rar

Work like charm! Thanks a alot! :)

[Busykid508]

Work like charm! Thanks a alot! :)

Thank you....:):D

[Busykid508]

Can someone post modified BIOS for my laptop for Windows 7?
Laptop Manufacturer: HP
Model No.: HP PAVILLION TX1301AU
BIOS LINK FOR DOWNLOAD: http://rapidshare.com/files/274855851/sp39359.exe.html
Bios type: Phoenix

Please someone give me modified SLIC BIOS...

Also will the bios be flashed automatically by running .exe bios file?


We need this before we can modify the bios...please follow directions as outlined below

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[monalac]

no, i didnt rename any files which i uploaded. its same file which i downloaded from HP support
here is AcpiTbls.rw attached in link below.. pls flash it for me..
http://www.mediafire.com/?4nletwg4y3a
http://www.mediafire.com/file/4nletwg4y3a/AcpiTbls.rw

[Busykid508]

Can someone post modified BIOS for my laptop for Windows 7?
Laptop Manufacturer: HP
Model No.: HP PAVILLION TX1301AU
BIOS LINK FOR DOWNLOAD: http://rapidshare.com/files/274855851/sp39359.exe.html
Bios type: Phoenix

Please someone give me modified SLIC BIOS...

Also will the bios be flashed automatically by running .exe bios file?

-Manufacturer: HP
-Motherboard Model: Pavilion tx1301au Notebook PC (For Notebook System BIOS with AMD Processors and Microsoft Windows Vista Based)
-Bios revision: F.20 (sp39359.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39359.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-60760-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3543756
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30BFF20_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PH161700 /x BIOS.WPH <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked Only Replace SLIC Elements of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_tx1301au_Notebook_PC_For_Notebook_Syst em_BIOS_with_AMD_Processors_and_Microsoft_Windows_ Vista_Based-HP-F.20_sp39359.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_tx1301au_Notebook_PC.rar

[monalac]

thanks a lot but how to i make my USB drive as bootable? cant i flash by .exe file?

[Busykid508]

thanks a lot but how to i make my USB drive as bootable? cant i flash by .exe file?

There is a text file and a word document file which shows you how to create a bootable USB flash drive....didn't you look through the files that you downloaded.

[monalac]

its downloading... :)
i will look and post a feedback regarding the same..thanks :D

[monalac]

type: PH161700 /x BIOS.WPH <ENTER>
i get bad command or filename at above command... i coped PHFLASH16.exe and minidos.sys

Edit: i flashed with sp39359.exe file was that a modified one?
Edit 2: i tried PH161700 /x BIOS.WPH <ENTER> and it worked... let me see if i can activate windows
Edit 3: Attached screenshot .. it doesnt work.. gives error 0xC004F050 The software licencing service reported that the product key is invalid..

[parkoz]

I just checked your bios update....it already has SLIC v2.1 and all you need to do is flash your bios with this new bios update and installed the certificates and OEM SLP Product Keys and you are good to go....congratulations...:):D

http://forums.mydigitallife.info/attachment.php?attachmentid=2742&stc=1&d=1252078746

Thanks your answer.
but I could't know it already had SLIC v2.1

[KillerJupe]

i saw a a long time ago that SLIC moddin sony's wasn't very successful.

i have a sony w/ slic 2.0 from vista and a phoenix bios.
Think i should try moding it or still no go?

thanks

[Busykid508]

type: PH161700 /x BIOS.WPH <ENTER>
i get bad command or filename at above command... i coped PHFLASH16.exe and minidos.sys

Edit: i flashed with sp39359.exe file was that a modified one?

The exe file is not the modified file....

I specifically labeled MODIFIED BIOS Folder.....what does modified BIOS Folder mean - it means exactly what it says....that is the modified bios file...and not sp39359.exe....

[Busykid508]

i saw a a long time ago that SLIC moddin sony's wasn't very successful.

i have a sony w/ slic 2.0 from vista and a phoenix bios.
Think i should try moding it or still no go?

thanks

Actually, we have had some success stories with the SONY and the new mod tool.

Give us the following information and let me see what we can do:
-Manufacturer: SONY
-Motherboard Model:
-Bios revision:
-Bios Type: Phoenix BIOS
-Bios Download Link:

[Busykid508]

http://forums.mydigitallife.info/attachment.php?attachmentid=2742&stc=1&d=1252078746

Thanks your answer.
but I could't know it already had SLIC v2.1

If you need the Toshiba Certificate and OEM SLP Product keys for Vista and Windows 7, download it here: http://slics.myftp.org//Toshiba_Certificate.rar

[monalac]

Edit 2: i tried PH161700 /x BIOS.WPH <ENTER> and it worked... let me see if i can activate windows
Edit 3: Attached screenshot .. it doesnt work.. gives error 0xC004F050 The software licencing service reported that the product key is invalid..

i inserted that HP key successfully but when not when i insert the main key, it doesnt work :(

http://img228.imageshack.us/img228/5226/coofo.th.png (http://img228.imageshack.us/i/coofo.png/)

can you update .exe bios file to modified one and upload? :(

[Busykid508]

Edit 2: i tried PH161700 /x BIOS.WPH <ENTER> and it worked... let me see if i can activate windows
Edit 3: Attached screenshot .. it doesnt work.. gives error 0xC004F050 The software licencing service reported that the product key is invalid..

i inserted that HP key successfully but when not when i insert the main key, it doesnt work :(

http://img228.imageshack.us/img228/5226/coofo.th.png (http://img228.imageshack.us/i/coofo.png/)


Here is the order of which you MUST FOLLOW:

Place HP Certificate in C-DRIVE by itself and NOT in any folder.

Go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT - Right click on COMMAND PROMPT and RUN AS ADMINISTRATOR

When command prompt opens, type: slmgr.vbs -ilc c:\hp.xrm-ms <ENTER>

Wait for the host to come back with a message saying that it was successful.

After the SUCCESS MESSAGE returns, type: slmgr.vbs -ipk xxxxx-xxxxx-xxxxx-xxxxx <ENTER> - Wait for host to come back with message saying the Product Key was SUCCESSFULLY installed and then reboot the computer.

[monalac]

Doesnt work :(

[markorlando]

Hi Busykid508,

I was wondering if you could help out on my BIOS request... Didn't go to good last night.

The original post is #3760, and there are several more posts later:
http://forums.mydigitallife.info/showpost.php?p=132867&postcount=3760 (http://forums.mydigitallife.info/showpost.php?p=132867&postcount=3760)

I have tried using ph161700.exe but it returns an error (see post 3772).

Any help is GREATLY appreciated!!

Thanks,
Mark

[Busykid508]

Hi Busykid508,

I was wondering if you could help out on my BIOS request... Didn't go to good last night.

The original post is #3760, and there are several more posts later:
http://forums.mydigitallife.info/showpost.php?p=132867&postcount=3760 (http://forums.mydigitallife.info/showpost.php?p=132867&postcount=3760)

I have tried using ph161700.exe but it returns an error (see post 3772).

Any help is GREATLY appreciated!!

Thanks,
Mark

Look on next page and I modified the file and it is in .EXE for mor you to flash.

[monalac]

Here is the order of which you MUST FOLLOW:

Place HP Certificate in C-DRIVE by itself and NOT in any folder.

Go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT - Right click on COMMAND PROMPT and RUN AS ADMINISTRATOR

When command prompt opens, type: slmgr.vbs -ilc c:\hp.xrm-ms <ENTER>

Wait for the host to come back with a message saying that it was successful.

After the SUCCESS MESSAGE returns, type: slmgr.vbs -ipk xxxxx-xxxxx-xxxxx-xxxxx <ENTER> - Wait for host to come back with message saying the Product Key was SUCCESSFULLY installed and then reboot the computer.

doesnt work... :( now what? can u give me modified .exe bios file?

[Busykid508]

-Motherboard Manufacturer and Model : Fujitsu T1010
-Bios Revision : 1.12
-Bios Type : Phoenix
-Bios SLIC : curently 2.0, I need 2.1!
-Bios Link : http://www.fujitsupc.com/downloads/mobile/fjbios/T1010_BIOS_V1.12_FPC46-1563-06.exe

My BIOS ACPI Tables are attached to this message.

Note that the above Fujitsu BIOS is in the form of an .exe (FlashAid 4.2) that will ONLY run on the T1010 laptop... so it is a bitch to extract the ROM file. So I did this for you...I ran the program and then zipped up the temp folder that is created when the .exe runs. This folder includes the BIOS_Data.ROM file (and also a BIOSHeader.ini file?).
It is uploaded here ("FlashAid40 output with .ROM BIOS file.zip"):
http://www.mediafire.com/?sharekey=55ac719817ae1c7a0f83d91f6dff7c38e04e75f6 e8ebb871

THANKS A BUNCH GUYS!
-Mark

Ok, I corrected the problem...do not use PHLASH17...follow instructions below and you should be able to activate windows

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook T1010
-Bios revision: 1.12
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fujitsupc.com/downloads/mobile/fjbios/T1010_BIOS_V1.12_FPC46-1563-06.exe
-Winflash Bios Update Tool Included - Rename T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010_BIOS_V1.12_FPC46-1563-06.EXE and double click file to flash bios and follow on-screen instructions.
-SLIC: FUJITSU[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: FUJITSU
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12-FUJITSU[FUJ-PC-FUJ]2.1.BIN_SLIC21_FUJITSUL_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12.rar

[Busykid508]

doesnt work... :( now what? can u give me modified .exe bios file?

There is no Modified EXE FILE in HP...and this mod has already been proven to work...you are not the first to use it....it has been tested 7 times with success and you are the only one who has not made it work...

Provide this for me below for the 2nd time

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[monalac]

There is no Modified EXE FILE in HP...and this mod has already been proven to work...you are not the first to use it....it has been tested 7 times with success and you are the only one who has not made it work...

Provide this for me below for the 2nd time

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

hi buddy, here is the link of ACPI TABLES
http://www.sendspace.com/file/ax7g81

just send me .WPH file so that ill replace it...

[KillerJupe]

Actually, we have had some success stories with the SONY and the new mod tool.:


-Manufacturer: SONY
-Motherboard Model: CR vgn-cr353
-Bios revision: R2101Q0.ROM
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-RW Dump: http://www.sendspace.com/file/x7zx4o

computer has slic 2.0 would like 2.1 :)

will there by any way to know if this will brick me before trying it or not?

thx for the try

[Busykid508]

-Manufacturer: SONY
-Motherboard Model: CR vgn-cr353
-Bios revision: R2101Q0.ROM
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891

computer has slic 2.0 would like 2.1 :)

will there by any way to know if this will brick me before trying it or not?

thx for the try

I forgot to tell you but we have to have this file below...please follow directions

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

hi buddy, here is the link of ACPI TABLES
http://www.sendspace.com/file/ax7g81

just send me .WPH file so that ill replace it...

Are you blind as bat...there is a fokler that is named: Modified Bios and Original Bios and Utlities

Inside that folder is another folder named MODIFIED BIOS. Inside that folder is the .WPH file...what is wrong with you?

I just looked at your RW Everything Report and you have successfully flashed your bios with HP SLIC 2.1...

Give me the last 5 digits of the OEM SLP Product Key that you are using to activate windows...and are you trying to activate windows Vista or Windows 7?

[KillerJupe]

I forgot to tell you but we have to have this file below...please follow directions

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

sorry bout that. original post is edited
#3805

[monalac]

Are you blind as bat...there is a fokler that is named: Modified Bios and Original Bios and Utlities

Inside that folder is another folder named MODIFIED BIOS. Inside that folder is the .WPH file...what is wrong with you?

I just looked at your RW Everything Report and you have successfully flashed your bios with HP SLIC 2.1...

Give me the last 5 digits of the OEM SLP Product Key that you are using to activate windows...and are you trying to activate windows Vista or Windows 7?

Dude,
i have renamed that .WPH file from Modified Bios and Original Bios and Utlities to bios.WPH in the bootable disk and flashed as you said...
i just used xxxx-xxxx-xxxx-xxxx and xxxxx-xxxxx-xxxxx-xxxxx and xxxxx-xxxxx-xxxxx-xxxxx-xxxxx with the X's.. but didnt work..
which key to use now?
i am trying to activate Windows 7 Ultimate x64 ..

last 5 digits PMJBM


And there is no HP key in OEM SLP PRODUCT KEYS FOR WINDOWS 7.TXT

[dfuk]

MOD Request from 2.0 to SLIC 2.1

Motherboard Manufacturer and Model : Acer Aspire 3690
Bios : Phoenix v.3.60 ( Vista Bios )
Download link : ftp://ftp.work.acer-euro.com/notebook/aspire_3690/bios/BIOS%203.60.zip

hellp Busykid508. Thank you for the previous mod for zibias, but he posted the wrong url to the bios file, wireless networking doesn't work properly on my lappy with version 3.10 of the bios. So could you please mod version 3.60 as this is the latest/last bios for the acer aspire 369x laptops.

Request Acer SLIC 2.1 for Windows 7

Thanks dfuk

[Busykid508]

-Manufacturer: SONY
-Motherboard Model: CR vgn-cr353
-Bios revision: R2101Q0.ROM
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-RW Dump: http://www.sendspace.com/file/x7zx4o

computer has slic 2.0 would like 2.1 :)

will there by any way to know if this will brick me before trying it or not?

thx for the try

Actually, this one was pretty simple to do...

-Manufacturer: SONY
-Motherboard Model: VAIO CR vgn-cr353
-Bios revision: R2101Q0
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Sony/SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0.rar

[Busykid508]

Dude,
i have renamed that .WPH file from Modified Bios and Original Bios and Utlities to bios.WPH in the bootable disk and flashed as you said...
i just used xxxx-xxxx-xxxx-xxxx and xxxxx-xxxxx-xxxxx-xxxxx and xxxxx-xxxxx-xxxxx-xxxxx-xxxxx with the X's.. but didnt work..
which key to use now?
i am trying to activate Windows 7 Ultimate x64 ..

last 5 digits PMJBM

This last PMJBM is a correct one to use...

Did you use any loaders, patches, cracks or bios emulators to activate windows prior or before you flashed the bios?

[monalac]

This last PMJBM is a correct one to use...

Did you use any loaders, patches, cr**ks or bios emulators to activate windows prior or before you flashed the bios?

Yes but deactivated them. i used windows 7 toolkit 1.8 and removed all cracks..


Quote:
And there is no HP key in OEM SLP PRODUCT KEYS FOR WINDOWS 7.TXT

[Busykid508]

MOD Request from 2.0 to SLIC 2.1

Motherboard Manufacturer and Model : Acer Aspire 3690
Bios : Phoenix v.3.60 ( Vista Bios )
Download link : ftp://ftp.work.acer-euro.com/notebook/aspire_3690/bios/BIOS%203.60.zip

hellp Busykid508. Thank you for the previous mod for zibias, but he posted the wrong url to the bios file, wireless networking doesn't work properly on my lappy with version 3.10 of the bios. So could you please mod version 3.60 as this is the latest/last bios for the acer aspire 369x laptops.

Request Acer SLIC 2.1 for Windows 7

Thanks dfuk

Give it a few minutes to finish uploading to the server


-Manufacturer: ACER
-Motherboard Model: Aspire 3690
-Bios revision: 3.60
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.work.acer-euro.com/notebook/aspire_3690/bios/BIOS%203.60.zip
-Winflash Bios Update TOols Included - Phlash Bios in DOS using Phlash17 (ph161700) on bootable usb flash drive - Rename BL50310A_SLIC.WPH to BL50310A.WPH and at command prompt in DOS, type phlash16 BL50310A.WPH /x /s /c /mode=3
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - TICKED ONLY Replace SLIC Elements of RW EVerything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

ACER_Aspire_3690-Acer-3.60-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Acer/ACER_Aspire_3690-Acer-3.60.rar

[KillerJupe]

Actually, this one was pretty simple to do...

-Manufacturer: SONY
-Motherboard Model: VAIO CR vgn-cr353
-Bios revision: R2101Q0
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Sony/SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0.rar

hey thanks, should i be concerned that i have a cr_vgn_cr353 (not 460f like in the file description?)

glad you said it was easy makes me less nervous about flashing after some ppl said its hard for sony... here is to hopin!

[Busykid508]

Yes but deactivated them. i used windows 7 toolkit 1.8 and removed all cr**ks..


Quote:
And there is no HP key in OEM SLP PRODUCT KEYS FOR WINDOWS 7.TXT

You do not need an HP OEM SLP PRODUCT KEY....

ANY OEM SLP Product Key will activate Windows 7 as OEM

[Busykid508]

hey thanks, should i be concerned that i have a cr_vgn_cr353 (not 460f like in the file description?)

glad you said it was easy makes me less nervous about flashing after some ppl said its hard for sony... here is to hopin!

Lol....I have no idea about the CR....that is the information which you gave and I took at face value without making any judgment of it...

Afterall, this information came from you and not me...

[monalac]

You do not need an HP OEM SLP PRODUCT KEY....

ANY OEM SLP Product Key will activate Windows 7 as OEM

then why does it give that error :( what to do now?

[Busykid508]

Yes but deactivated them. i used windows 7 toolkit 1.8 and removed all cr**ks..


Quote:
And there is no HP key in OEM SLP PRODUCT KEYS FOR WINDOWS 7.TXT

This does not remove all the cracks. What a loader does to windows is install certain files that turn and RTM version into a RC version and it screws up windows for you.

The only way to properly fix this is to format the hard drive and reinstall windows 7.

I know that is a pain in the ass but that is the only true way to fix this problem...

[markorlando]

Ok, I corrected the problem...do not use PHLASH17...follow instructions below and you should be able to activate windows

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook T1010
-Bios revision: 1.12
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fujitsupc.com/downloads/mobile/fjbios/T1010_BIOS_V1.12_FPC46-1563-06.exe
-Winflash Bios Update Tool Included - Rename T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010_BIOS_V1.12_FPC46-1563-06.EXE and double click file to flash bios and follow on-screen instructions.
-SLIC: FUJITSU[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: FUJITSU
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12-FUJITSU[FUJ-PC-FUJ]2.1.BIN_SLIC21_FUJITSUL_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12.rar

Hi Busykid508,

Thanks for doing this! Unfortunately, when I try to run the modded T1010_BIOS_V1.12_FPC46-1563-06.exe I get the same error that I got before:

"The specified BIOS data file is corrupt or is a format that cannot be used by this program.
Please specify the correct BIOS data file for this model."

Any other ideas?

Thanks,
Mark

[Busykid508]

Hi Busykid508,

Thanks for doing this! Unfortunately, when I try to run the modded T1010_BIOS_V1.12_FPC46-1563-06.exe I get the same error that I got before:

"The specified BIOS data file is corrupt or is a format that cannot be used by this program.
Please specify the correct BIOS data file for this model."

Any other ideas?

Thanks,
Mark

I found the .ROM file for you motherboard...download it and try to flash bios using the method outline below in DOS - Also, try renaming the long executable file T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010.exe and see if that will work.

I just thought of something which may have been left out when clicking on the Winflash File in Windows. Did you right click on the file and RUN AS ADMINISTRATOR before clicking on it to flash bios in windows?


-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook T1010
-Bios revision: 1.12
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fujitsupc.com/downloads/mobile/fjbios/T1010_BIOS_V1.12_FPC46-1563-06.exe
-Winflash Bios Update Tool Included - There are 2 ways to flash the bios and both will work. One flash bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename SNCV112_SLIC.ROM to SNCV112.ROM and at command prompt in DOS, type: ph161700 /x /force /mode=3 SNCV112.ROM <ENTER>. The Second way to flash the bios is to Rename T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010_BIOS_V1.12_FPC46-1563-06.EXE and double click file to flash bios and follow on-screen instructions.
-SLIC: FUJITSU[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: FUJITSU
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12-FUJITSU[FUJ-PC-FUJ]2.1.BIN_SLIC21_FUJITSUL_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12.rar

[monalac]

I have dualboot C:\ and D:\ and D:\ has windows 7x64.. ive gone into windows Vista which is on C:\ and formatted D:\ and installing Windows 7 x86.. hope the activation thing works now..
thanks to busykid.. let me know if that will work

[911medic]

Hi Busykid508,

Thanks for doing this! Unfortunately, when I try to run the modded T1010_BIOS_V1.12_FPC46-1563-06.exe I get the same error that I got before:

"The specified BIOS data file is corrupt or is a format that cannot be used by this program.
Please specify the correct BIOS data file for this model."

Any other ideas?

Thanks,
Mark

Out of curiosity, did the bios from last evening not work? The mods are very similar...

[monalac]

Oh fuck.. i dont believe.. it actually worked.. formatting helped :eek:
Thanks busykid058 :D i dont know how to thank you :rolleyes:

[Busykid508]

Oh fuck.. i dont believe.. it actually worked.. formatting helped :eek:
Thanks busykid058 :D i dont know how to thank you :rolleyes:

Glad it worked....now you know what to do.....:)

[DarkSoroush]

Plz add or create a SLIC2.1 on this bios.

-Motherboard Manufacturer and Model : Gigabyte GA-945PL-S3P
-Bios Revision : F6a
-Bios Type : Phoenix BIOS
-Bios SLIC : Nothing at now!!
-Bios Link : Uploaded to rapid > http://rapidshare.com/files/275667891/945PLS3P.zip (same with official release!)
-Rw-everything report : There isn't any SLIC tab!!


Thanks in advance.

[911medic]

Plz add or create a SLIC2.1 on this bios.

-Motherboard Manufacturer and Model : Gigabyte GA-945PL-S3P
-Bios Revision : F6a
-Bios Type : Phoenix BIOS
-Bios SLIC : Nothing at now!!
-Bios Link : Uploaded to rapid > http://rapidshare.com/files/275667891/945PLS3P.zip (same with official release!)
-Rw-everything report : There isn't any SLIC tab!!


Thanks in advance.

Award bios..This is the wrong thread!!!

Use the award tool for yourself or repost in the appropriate thread.

[markorlando]

I found the .ROM file for you motherboard...download it and try to flash bios using the method outline below in DOS - Also, try renaming the long executable file T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010.exe and see if that will work.

I just thought of something which may have been left out when clicking on the Winflash File in Windows. Did you right click on the file and RUN AS ADMINISTRATOR before clicking on it to flash bios in windows?


-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook T1010
-Bios revision: 1.12
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fujitsupc.com/downloads/mobile/fjbios/T1010_BIOS_V1.12_FPC46-1563-06.exe
-Winflash Bios Update Tool Included - There are 2 ways to flash the bios and both will work. One flash bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename SNCV112_SLIC.ROM to SNCV112.ROM and at command prompt in DOS, type: ph161700 /x /force /mode=3 SNCV112.ROM <ENTER>. The Second way to flash the bios is to Rename T1010_BIOS_V1.12_FPC46-1563-06_SLIC.EXE to T1010_BIOS_V1.12_FPC46-1563-06.EXE and double click file to flash bios and follow on-screen instructions.
-SLIC: FUJITSU[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: FUJITSU
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12-FUJITSU[FUJ-PC-FUJ]2.1.BIN_SLIC21_FUJITSUL_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_T1010-Fujitsu-Siemens-1.12.rar

Hi again,

I tried both suggestions, but neither worked. :(

Renaming the .exe and running as administrator did not fix the error (and the official/original .exe works fine), and running ph161700 /x /force /mode=3 SNCV112.ROM from DOS still resulted in "Phoenix Phlash16 error Invalid FlashInt.Bin !" error that I got before.

Unless you have a different idea maybe we should just give up?
Do you have a suggestion for which soft cr**k works best? Does 7Loader work good?

Thanks for the help....
Mark

[Busykid508]

For qvgrayfox

-Manufacturer: ACER
-Motherboard Model: Aspire 6930G
-Bios revision: 3236
-Bios Type: Phoenix BIOS
-Bios Download Link: http://global-download.acer.com/GDFiles%5CBIOS/BIOS/BIOS_Acer_3236_A_AS6930.zip?acerid=633796214941370 309&Step1=Notebook&Step2=Aspire&Step3=Aspire%206930G&OS=V10&LC=en&SC=PA_6
-Source of Bios Download Link: http://www.tyan.com/support_download_bios.aspx?model=S.S5380
-Winflash Bios Update Tools Included I Strongly suggest you flash your bios in DOS and use PHLASH17 (PH161700) on Bootable USB Flash Drive Rename ZK2_3236_SLIC.WPH to ZK2_3236.WPH and At command prompt, type: ph161700 /x /force /mode=3 ZK2_3236.WPH <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

ACER_Aspire_6930G-Acer_3236-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Acer/ACER_Aspire_6930G-Acer_3236.rar

[Busykid508]

Plz add or create a SLIC2.1 on this bios.

-Motherboard Manufacturer and Model : Gigabyte GA-945PL-S3P
-Bios Revision : F6a
-Bios Type : Phoenix BIOS
-Bios SLIC : Nothing at now!!
-Bios Link : Uploaded to rapid > http://rapidshare.com/files/275667891/945PLS3P.zip (same with official release!)
-Rw-everything report : There isn't any SLIC tab!!


Thanks in advance.

You are in the wrong forum...this is for Phoenix Bios and Gigabyte BIOS are Award....please submit it here: http://forums.mydigitallife.info/showthread.php?t=5863

[Busykid508]

Hi again,

I tried both suggestions, but neither worked. :(

Renaming the .exe and running as administrator did not fix the error (and the official/original .exe works fine), and running ph161700 /x /force /mode=3 SNCV112.ROM from DOS still resulted in "Phoenix Phlash16 error Invalid FlashInt.Bin !" error that I got before.

Unless you have a different idea maybe we should just give up?
Do you have a suggestion for which soft cr**k works best? Does 7Loader work good?

Thanks for the help....
Mark

Did you run the .exe file in Administrative Mode? - RUN AS ADMINISTRATOR.

[DarkSoroush]

You are in the wrong forum...this is for Phoenix Bios and Gigabyte BIOS are Award....please submit it here: http://forums.mydigitallife.info/showthread.php?t=5863

aha. But EVEREST show me that BIOS Manufacturer is Phoenix Technologies Ltd.

Any way. I will post it in award topic. tnx

[Busykid508]

aha. But EVEREST show me that BIOS Manufacturer is Phoenix Technologies Ltd.

Any way. I will post it in award topic. tnx

What it shows is that Phoenix is the creator of the bios but Phoenix makes 3 different kind of bios - Award, AMI and Phoenix....

So what you saw was the creator of the Award Bios which belongs to all gigabyte bios.

[911medic]

aha. But EVEREST show me that BIOS Manufacturer is Phoenix Technologies Ltd.

Any way. I will post it in award topic. tnx

Dont you love the insight that everest gives you???

Notice we dont recommend it any more...:cool::p

P.S. I am not sure that Phoenix make AMI, but that is a non-issue....:p

[markorlando]

Did you run the .exe file in Administrative Mode? - RUN AS ADMINISTRATOR.

As I mentioned above:

Renaming the .exe and running as administrator did not fix the error (and the official/original .exe works fine),

So yes, I tried that...

I guess this isn't going to work. Do you have any suggestions for a soft bootloader to use?

-Mark

[Busykid508]

As I mentioned above:

Renaming the .exe and running as administrator did not fix the error (and the official/original .exe works fine),

So yes, I tried that...

I guess this isn't going to work. Do you have any suggestions for a soft bootloader to use?

-Mark

There is WOW that might work for you....just use the search engine to find WOW 7 or higher....WOW 6 is for Vista...

[911medic]

As I mentioned above:

Renaming the .exe and running as administrator did not fix the error (and the official/original .exe works fine),

So yes, I tried that...

I guess this isn't going to work. Do you have any suggestions for a soft bootloader to use?

-Mark

Talk to Yen. I havent followed the steps you took after BK took over the mod. It may be a switch you are missing, or a simple addition to the bios ID..

[chiledog]

-Manufacturer: ACER
-Motherboard Model: Aspire 9300
-Bios revision: 1.20
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.acer-euro.com/notebook/aspire_9300/bios/v1.20.zip
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-15624-1&lc=en&dlc=en&cc=uk&product=367687&os=228&lang=en
-WINFLASH and PHLASH16 Bios Update TOols Included - However, I strongly suggest to FLASH BIOS IN DOS using PHLASH16 Bios Flash Utility and bootable USB Flash Drive - Rename MAM_V120_SLIC.WPH to MAM_V120.WPH before flashing bios. In Dos and at the command prompt, type: phlash16 /x /s /mode=3 MAM_V120.WPH <ENTER>
-SLIC: DELL_QA09.BIN 2.1
-SLP: DELL
-DELL Certificate Included
-Tool: Phoenix Mod Tool v0.020
-Method: SSV2
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


ACER-Aspire_9300-ACER-1.20-DELL-SLIC21_DELL_SLP
http://www.box.net/shared/uxl5x3ml0d
http://box.net/rssdownload/321809962/ACER-Aspire_9300-ACER-1.20-DELL-SLIC21_DELL_SLP.rar


Confirmed working and activated successfully flashed from dos
Thank you sir

[Busykid508]

Confirmed working and activated successfully flashed from dos
Thank you sir

Thanks for letting us know...enjoy...:D:)

[jet29]

You had version 1.10 for the bios but fijitsu-siemens has your computer motherboard as v1.23.....I used v1.23.

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: amilo li 2735
-Bios revision: 1.23
-Bios Type: Phoenix BIOS
-Bios Download Link: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=99BE856D-C22A-4824-A230-05E0A9DE2DA0&FileFolder=Downloadfiles&FileTypeExtension=EXE&FileNameClient=FTS_BIOSWindowsFlash32bitWinflashAM ILOLi273x_110_1037102.EXE&FileSize=1294069&From=Tm9tYFxoQWRnYE9qPW1qcm5gbSIr
-Source of Bios Download Link: http://support.ts.fujitsu.com/com/support/downloads.html
-Winflash Bios Update Tool Included - Flash BIOS in Winflash (Located in Win Folder) but rename V110_SLIC.EXE to V110.EXE before flashing bios in windows. Follow on-screen instructions.
-SLIC: Fujitsu[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: Fijitsu
-Fijitsu Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included


Fujitsu-Siemens_Amilo_XI_2735_Fujitsu-Siemens-1.23-Fujitsu[FUJ-PC-FUJ]2.1.BIN_SLIC21_Fujitsu_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Amilo_XI_2735_Fujitsu-Siemens-1.23.rar


Once again after a bit of fiddling about the slic above has flashed and activated and system is running, i had slight problem reactivating vista, but all is good now, again a very big thanks to busykid for a very fast response in providing new slic, really glad and best of luck with all that u do! This is the best forum!!! n.b. the bios is 1.1 and not 1.23 (the 1.23 is the mb of file size, you must have read it quickly) thanks again

[Busykid508]

Once again after a bit of fiddling about the slic above has flashed and activated and system is running, i had slight problem reactivating vista, but all is good now, again a very big thanks to busykid for a very fast response in providing new slic, really glad and best of luck with all that u do! This is the best forum!!! n.b. the bios is 1.1 and not 1.23 (the 1.23 is the mb of file size, you must have read it quickly) thanks again

Thanks for the confirmation and enjoy...:):D

[dfuk]

Give it a few minutes to finish uploading to the server


-Manufacturer: ACER
-Motherboard Model: Aspire 3690
-Bios revision: 3.60
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.work.acer-euro.com/notebook/aspire_3690/bios/BIOS%203.60.zip
-Winflash Bios Update TOols Included - Phlash Bios in DOS using Phlash17 (ph161700) on bootable usb flash drive - Rename BL50310A_SLIC.WPH to BL50310A.WPH and at command prompt in DOS, type phlash16 BL50310A.WPH /x /s /c /mode=3
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - TICKED ONLY Replace SLIC Elements of RW EVerything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

ACER_Aspire_3690-Acer-3.60-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Acer/ACER_Aspire_3690-Acer-3.60.rar

Talk about prompt service 35mins from request to flashing new bios.

Works perfectly, 7 activated.
Thanks

[Busykid508]

Talk about prompt service 35mins from request to flashing new bios.

Works perfectly, 7 activated.
Thanks

Thanks and enjoy...:):D

[hehenoodles]

-Manufacturer: HP
-Motherboard Model: HP Pavilion dv2660se Entertainment Notebook PC
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe

Thanks

[Busykid508]

-Manufacturer: HP
-Motherboard Model: HP Pavilion dv2660se Entertainment Notebook PC
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe

Thanks

Give it about 10 minutes for the file to be uploaded to the server before downloading...

-Manufacturer: HP
-Motherboard Model: Pavilion dv2660se Entertainment Notebook PC (WinFlash for HP Notebook System BIOS - Microsoft Windows Vista Based)
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67384-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3548269
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30CDF2E_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PH161700 /x BIOS.WPH <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: DYNAMIC - DEFAULT SETTINGS
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv2899es_Entertainment_Notebook_PC_For _Notebook_System_BIOS_with_Microsoft_Windows_Vista _Based-HP-F.2E_sp41959.exe-HPQOEMSLIC-MPC-HPQ.BIN_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_dv2899es_Entertainment_Notebook_PC.rar

[hehenoodles]

Give it about 10 minutes for the file to be uploaded to the server before downloading...

-Manufacturer: HP
-Motherboard Model: Pavilion dv2660se Entertainment Notebook PC (WinFlash for HP Notebook System BIOS - Microsoft Windows Vista Based)
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67384-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3548269
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30CDF2E_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PH161700 /x BIOS.WPH <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: DYNAMIC - DEFAULT SETTINGS
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv2899es_Entertainment_Notebook_PC_For _Notebook_System_BIOS_with_Microsoft_Windows_Vista _Based-HP-F.2E_sp41959.exe-HPQOEMSLIC-MPC-HPQ.BIN_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_dv2899es_Entertainment_Notebook_PC.rar

BIOS flashed and updated to SLIC 2.1.
This command (PH161700 /x BIOS.WPH) didn't work so I used:
PH161700 BIOS.WPH /BBL /S /X /C /MODE=3

[Busykid508]

BIOS flashed and updated to SLIC 2.1.
This command (PH161700 /x BIOS.WPH) didn't work so I used:
PH161700 BIOS.WPH /BBL /S /X /C /MODE=3

Whatever works for you is fine...glad it worked..:):D

[SumitB]

Thank You for the information and sorry for the hiccup. I am attaching the file as requested by you.

Download here (http://www.sendspace.com/file/6oep6f)

Awaiting your response.

Regards & Thanks!
Sumit


You need to pay attention to the rules....the rules say that you are to provide an RW Everything report and you did not and so, you have not.....

Please follow directions below

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

Requesting a mod for SLIC2.1 for HP for my HP Laptop V6219TU.

The BIOS can be downloaded here (ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42187.exe)

The BIOS is in WPH format and is a Phoenix BIOS.

It already has SLIC2.0 for HP and Vista is activated and runs fine on it. Now I want to install Windows 7 and need the 2.1 SLIC for it.

Thanks in advance

Regards
Sumit

-Manufacturer: HP
-Motherboard Model: Compaq Presario V6219TU Notebook PC (for Notebooks with Intel Processors - Microsoft Windows/Vista-Based)
-Bios revision: F.2D (sp42187.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42187.exe
-Source of Bios DOwnload Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67678-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3398100
-Winflash Bios Update Tool Included - However, I suggest you flash bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30BBF2D_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHoenix Mod Tool v0.032
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK RECOVERY FILES INCLUDED

HP_Compaq_Presario_V6219TU_Notebook_PC_for_Noteboo ks_with_Intel_Processors_and_Microsoft_Windows_Vis ta-Based-HP-F.2D_sp42187.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_V6219TU_Notebook_PC.rar

[mbuhgakeruh]

Request for modding BIOS to activate windows 7

-Manufacturer: NEC
-Motherboard Model: Versa L2100
-CPU Type: Intel
-Bios revision: Q5A06
-Bios Type: Phoenix BIOS
-Bios Download Link: http://202.188.160.140/User/Drivers%5CBIOS%5CE62xx_5A06_Vista.exe
-Original BIOS contain SLIC 2.0 for Vista.

i'd like to add it with HP SLIC 2.1
thank you.

[Cwelle]

Could someone add SLIC 2.1 for Win 7?

-Motherboard Manufacturer and Model : HP Pavilion dv6595eg Notebook
-Bios Revision : F.59 A
-Bios Type : Phoenix
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe

[johnalvin]

Hi. Can you help me to mod this BIOS for AS 3935. I have uploaded this to Megaupload. The BIOS 1.05 link: http://www.megaupload.com/?d=AREB2177

Thank you in advance for your help.

@yellowpower

i have the same lappy and i have requested a mod for the bios ver 1.04 and it was succesful. http://forums.mydigitallife.info/showpost.php?p=130993&postcount=3456

The bios version 1.05 that you have uploaded, is it from acer? i can not find any ver 1.05 on acer site. i ask this because the ver 1.05 bios that you have uploaded is quite odd, it has two slic marker both for slic 2.0 and 2.1 and the size is different. Care to share the original link for bios ver. 1.05?

[gmznet]

-Motherboard Manufacturer and Model : Samsung R510 ASS3 :eek:
-Bios Revision : 07LI
-Bios Type : Phoenix
-Bios Link : http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-ACPI Table: http://www.mediafire.com/?sharekey=204111690a2050f59bf8d6369220dcabe04e75f6 e8ebb871
-Slic: request for Acer 2.1

bios on exe file

I have no idea how to make it slic acer 2.1. I tried using Phoenix Bios editor but I got an error opening wph file. Attached you will find the Acer slic 2.1. Please Help me.

PS could be a good idea to make a tutorial, how to mod phoenix bios, or inform us where we can get the Phoenix Tool because I searched everywhere but didn't find.

[yellowpower]

@yellowpower

i have the same lappy and i have requested a mod for the bios ver 1.04 and it was succesful. http://forums.mydigitallife.info/showpost.php?p=130993&postcount=3456

The bios version 1.05 that you have uploaded, is it from acer? i can not find any ver 1.05 on acer site. i ask this because the ver 1.05 bios that you have uploaded is quite odd, it has two slic marker both for slic 2.0 and 2.1 and the size is different. Care to share the original link for bios ver. 1.05?


Hi. Yes this i newes bios from Acer support. I have updated and got 1.05 on my computer.

[yellowpower]

Hallo there. Some body have the newest bios with slic 2.1 for this computer?.

[johnalvin]

Hi. Yes this i newes bios from Acer support. I have updated and got 1.05 on my computer.

did you activate win 7 by bios ver 1.04 that you have requested here?http://forums.mydigitallife.info/showpost.php?p=132603&postcount=3709

can you tell which acer site/post the link for bios ver.1.05

thank you in advance :)

[gmznet]

anybody can help? thank u.


-Motherboard Manufacturer and Model : Samsung R510 ASS3 :eek:
-Bios Revision : 07LI
-Bios Type : Phoenix
-Bios Link : http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-Slic: request for Acer 2.1

bios on exe file

I have no idea how to make it slic acer 2.1. I tried using Phoenix Bios editor but I got an error opening wph file. Attached you will find the Acer slic 2.1. Please Help me.

PS could be a good idea to make a tutorial, how to mod phoenix bios, or inform us where we can get the Phoenix Tool because I searched everywhere but didn't find.

[Busykid508]

anybody can help? thank u.

We need this...most of people like yourself forget the rules....WE MUST have this below before we can modify a bios.

If you cannot provide it, you do not get a modified Bios.

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[yellowpower]

did you activate win 7 by bios ver 1.04 that you have requested here?http://forums.mydigitallife.info/showpost.php?p=132603&postcount=3709

can you tell which acer site/post the link for bios ver.1.05

thank you in advance :)

Yes. Win7 activated with bios 1.04, I have tested. The bios 1.05 have slic2.0 and can't active with win7. I have 2 of 3935.

[Busykid508]

Hallo there. Some body have the newest bios with slic 2.1 for this computer?.

You know the rules....this is not your first time here...so, why are you not providing the following?

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

Could someone add SLIC 2.1 for Win 7?

-Motherboard Manufacturer and Model : HP Pavilion dv6595eg Notebook
-Bios Revision : F.59 A
-Bios Type : Phoenix
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe

Provide the following as required in the rules of the first post of this section of the forum....don't you read?

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

Request for modding BIOS to activate windows 7

-Manufacturer: NEC
-Motherboard Model: Versa L2100
-CPU Type: Intel
-Bios revision: Q5A06
-Bios Type: Phoenix BIOS
-Bios Download Link: http://202.188.160.140/User/Drivers%5CBIOS%5CE62xx_5A06_Vista.exe
-Original BIOS contain SLIC 2.0 for Vista.

i'd like to add it with HP SLIC 2.1
thank you.


Why are you not following the rules and providing us the RW Everything Report as required in the rules of first post of this forum.

Provide this below

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[1234s282]

anybody can help? thank u.

Here you go :d

http://dl.getdropbox.com/u/747181/Samsung%20R510%20ASS3%2007LI%20Acer%202.1%20SLIC%2 0By%201234s282.zip

Acer 2.1 SLIC - Enjoy!

1234s282

[KillerJupe]

hi, in the bios post it says
"

Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using

PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at

command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>"

but there is not "dos flash tool"

there is a flash.bat but that runs a windows exe file

does this file also run under dos?

can you post the PH161700.exe your mentioned if thats the best way?
Thanks!

[Busykid508]

hi, in the bios post it says
"

Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using

PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at

command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>"

but there is not "dos flash tool"

there is a flash.bat but that runs a windows exe file

does this file also run under dos?

can you post the PH161700.exe your mentioned if thats the best way?
Thanks!

The PHLASH17 is in the download....look in the folder called Windows Activation and Xtras

[yellowpower]

You know the rules....this is not your first time here...so, why are you not providing the following?

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

Hi. I'm very sorry about that, but this is only a question not a request. I don't want to make double request and steal your time. Sorry about that. I will send a request soon and hope you can help me. Thank you in advance.

[yellowpower]

Hi. Yes this i newes bios from Acer support. I have updated and got 1.05 on my computer.

Yes. it's from Acer. Not from Acer website, but from a acer-supporter, he send me this for few days ago.

[johnalvin]

Yes. Win7 activated with bios 1.04, I have tested. The bios 1.05 have slic2.0 and can't active with win7. I have 2 of 3935.

:eek: we have 2 units also here one belong to a close friend and both activated using mooded bios ver 1.04 by BK. :D

oh i see the bios ver. 1.05 is not from acer site but was sent you by an acer tech support. thanks for the info.

[gmznet]

We need this...most of people like yourself forget the rules....WE MUST have this below before we can modify a bios.

If you cannot provide it, you do not get a modified Bios.

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

Ok, my friend. you can get it here;

http://www.mediafire.com/?sharekey=204111690a2050f59bf8d6369220dcabe04e75f6 e8ebb871

[gmznet]

-Motherboard Manufacturer and Model : Samsung R510 ASS3
-Bios Revision : 07LI
-Bios Type : Phoenix
-Bios Link : http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-ACPI Table: http://www.mediafire.com/?sharekey=204111690a2050f59bf8d6369220dcabe04e75f6 e8ebb871

-Slic: request for Acer 2.1 attached file

bios on exe file

I have no idea how to make it slic acer 2.1. I tried using Phoenix Bios editor but I got an error opening wph file. Attached you will find the Acer slic 2.1. Please Help me.

PS could be a good idea to make a tutorial, how to mod phoenix bios, or inform us where we can get the Phoenix Tool because I searched everywhere but didn't find.

[SEP800]

Got it!

Thanks!


It is working now..

[gmznet]

Here you go :d

http://dl.getdropbox.com/u/747181/Samsung%20R510%20ASS3%2007LI%20Acer%202.1%20SLIC%2 0By%201234s282.zip

Acer 2.1 SLIC - Enjoy!

1234s282

thank you, could you give me the tool you used for? thank u.:)

[Busykid508]

-Motherboard Manufacturer and Model : Samsung R510 ASS3
-Bios Revision : 07LI
-Bios Type : Phoenix
-Bios Link : http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-ACPI Table: http://www.mediafire.com/?sharekey=204111690a2050f59bf8d6369220dcabe04e75f6 e8ebb871

-Slic: request for Acer 2.1 attached file

bios on exe file

I have no idea how to make it slic acer 2.1. I tried using Phoenix Bios editor but I got an error opening wph file. Attached you will find the Acer slic 2.1. Please Help me.

PS could be a good idea to make a tutorial, how to mod phoenix bios, or inform us where we can get the Phoenix Tool because I searched everywhere but didn't find.

Your Header which is BIOSCODE.ROM is too small to insert an ACER SLIC....I found the smalllest SLIC which is possible so that it does not crash your computer....This is a Toshiba SLIC and works just as well as ACER

-Manufacturer: Samsung
-Motherboard Model: R510 ASS3
-Bios revision: 07LI
-Bios Type: Phoenix BIOS
-Primary Bios Download Link: http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-Winflash Bios Update Tool Included - Flash Bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and At command prompt in DOS, type: ph161700 BIOS.WPH /x /s /c /mode=3 <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-TOOL: Phoenix Mod Tool v0.032
-MethodL Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Samsung_R510_ASS3-Samsung-07YI-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Samsung/Samsung_R510_ASS3-Samsung-07YI.rar

[yellowpower]

Hi. I need help to mod this bios from slic 2.0 to 2.1

The link for AcpiTbls.rw: http://www.sendspace.com/file/j13sx9
The link for bios: http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.13_A_A.zip?acerid=633827214064106059&Step1=Notebook&Step2=Aspire&Step3=Aspire 8930G&OS=V10&LC=en&SC=EMEA_19

Thank you in advance for your help.

[Busykid508]

Hi. I need help to mod this bios from slic 2.0 to 2.1

The link for AcpiTbls.rw: http://www.sendspace.com/file/j13sx9
The link for bios: http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.13_A_A.zip?acerid=633827214064106059&Step1=Notebook&Step2=Aspire&Step3=Aspire 8930G&OS=V10&LC=en&SC=EMEA_19

Thank you in advance for your help.

Your bios is called an Insyde bios and we have a special forum for it....Please place your request here: http://forums.mydigitallife.info/showthread.php?t=7033&highlight=insyde

[gmznet]

Your Header which is BIOSCODE.ROM is too small to insert an ACER SLIC....I found the smalllest SLIC which is possible so that it does not crash your computer....This is a Toshiba SLIC and works just as well as ACER

-Manufacturer: Samsung
-Motherboard Model: R510 ASS3
-Bios revision: 07LI
-Bios Type: Phoenix BIOS
-Primary Bios Download Link: http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-Winflash Bios Update Tool Included - Flash Bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and At command prompt in DOS, type: ph161700 BIOS.WPH /x /s /c /mode=3 <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-TOOL: Phoenix Mod Tool v0.032
-MethodL Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Samsung_R510_ASS3-Samsung-07YI-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Samsung/Samsung_R510_ASS3-Samsung-07YI.rar

thank you very much!!! I will test it soon. could you please send me a copy of Phoenix Mod Tool v0.032? best regards. :)

[Busykid508]

Request for modding BIOS to activate windows 7

-Manufacturer: NEC
-Motherboard Model: Versa L2100
-CPU Type: Intel
-Bios revision: Q5A06
-Bios Type: Phoenix BIOS
-Bios Download Link: http://202.188.160.140/User/Drivers%5CBIOS%5CE62xx_5A06_Vista.exe
-Original BIOS contain SLIC 2.0 for Vista.

i'd like to add it with HP SLIC 2.1
thank you.

We must have this from you before we can modify your bios


First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

thank you very much!!! I will test it soon. could you please send me a copy of Phoenix Mod Tool v0.032? best regards. :)

Sorry but the tool is not available to the public and I am not allowed to share....

[gmznet]

Your Header which is BIOSCODE.ROM is too small to insert an ACER SLIC....I found the smalllest SLIC which is possible so that it does not crash your computer....This is a Toshiba SLIC and works just as well as ACER

-Manufacturer: Samsung
-Motherboard Model: R510 ASS3
-Bios revision: 07LI
-Bios Type: Phoenix BIOS
-Primary Bios Download Link: http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=it&CttFileID=1957047&CDCttType=FM&ModelType=N&ModelName=NP-R510E&VPath=FM/200810/20081001143009859_WIN_R510_07LI.exe
-Winflash Bios Update Tool Included - Flash Bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and At command prompt in DOS, type: ph161700 BIOS.WPH /x /s /c /mode=3 <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-TOOL: Phoenix Mod Tool v0.032
-MethodL Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Samsung_R510_ASS3-Samsung-07YI-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Samsung/Samsung_R510_ASS3-Samsung-07YI.rar

sorry. link is not working to download the file. :eek:

[Busykid508]

sorry. link is not working to download the file. :eek:

I just tested the link and downloaded the very file in which I uploaded a few minutes ago...try again...

http://slics.myftp.org//Samsung/Samsung_R510_ASS3-Samsung-07YI.rar

[gmznet]

I just tested the link and downloaded the very file in which I uploaded a few minutes ago...try again...

http://slics.myftp.org//Samsung/Samsung_R510_ASS3-Samsung-07YI.rar

must be a problem with myftp.org, I tested many times. could you please upload to a different location...:)

reponse from server... source file could not be read.

[Busykid508]

must be a problem with myftp.org, I tested many times. could you please upload to a different location...:)

reponse from server... source file could not be read.

Here
http://www.box.net/shared/h3xgkm1id0

[gmznet]

Here
http://www.box.net/shared/h3xgkm1id0

perfect, I will let you know asap. thanks again. :D

and if you find a way to... you know... my email is mexstore-swiss@yahoo.it

[willche]

-Motherboard Manufacturer and Model : Notebook Fujitsu S6520
-revision : 1.23
-Bios Type : Phoenix
-Bios SLIC : Fujitsu
-Bios Link : http://support.fujitsupc.com/CS/Portal/driverdownload.do=Aspire 5590&OS=V10&LC=en&SC=AAP_7

Thank for advance

[Busykid508]

perfect, I will let you know asap. thanks again. :D

and if you find a way to... you know... my email is mexstore-swiss@yahoo.it

Find a way to what? The Tool? Sorry, it is not going to happen from me.

[Busykid508]

-Motherboard Manufacturer and Model : Notebook Fujitsu S6520
-revision : 1.23
-Bios Type : Phoenix
-Bios SLIC : Fujitsu
-Bios Link : http://support.fujitsupc.com/CS/Portal/driverdownload.do=Aspire 5590&OS=V10&LC=en&SC=AAP_7

Thank for advance

First, your download link does not work and second, We must have this from you or there will be no mod


First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[lotusofnj]

Please mod my bios to 2.1

-Motherboard Manufacturer and Model : Emachines M6805
-Bios Revision : 12-2004 (0F08.P00)
-Bios Type : Phoenix
-Bios SLIC : Prefer 2.1 emachines if possible (Currently no slic)
-Bios Original exe Link : http://downloads.emachines.com/drivers/bios/M6805_Shadow-K8.exe
-Bios ROM Link: http://www.mediafire.com/download.php?yzea3dgooqh
-Rw-everything report: the program blue screens my machine everytime I try and run it. Is there anything I can do to get you the information you need without this program?

Thanks!

[ciscokid]

Hi, I had requested this mod before Acer SLIC 2.1 became available and it was done using HP. I'd like to have it done with Acer SLIC 2.1 if possible.

The bios comes with Acer SLIC 2.0 for Vista so I guess it just needs to be swapped for 2.1?

Here is the info:

Notebook: Acer TravelMate 4202wlmi
BIOS Company: Phoenix
Bios Version: 3.10
Bios Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
Bios already contains Acer SLIC 2.0 and Acer SLP
Requesting Acer SLIC 2.1 for Windows 7

Thanks in advance, I really appreciate it!! :)

[Busykid508]

Please mod my bios to 2.1

-Motherboard Manufacturer and Model : Emachines M6805
-Bios Revision : 12-2004 (0F08.P00)
-Bios Type : Phoenix
-Bios SLIC : Prefer 2.1 emachines if possible (Currently no slic)
-Bios Original exe Link : http://downloads.emachines.com/drivers/bios/M6805_Shadow-K8.exe
-Bios ROM Link: http://www.mediafire.com/download.php?yzea3dgooqh
-Rw-everything report: the program blue screens my machine everytime I try and run it. Is there anything I can do to get you the information you need without this program?

Thanks!

Normally, I would not do this without the report for it helps find the hidden strings and tables...but I looked at your file and there is no SLIC element at all

So, I modified it without the report...please let me know if this worked for you or not

-Manufacturer: Emachines
-Motherboard Model: M6805
-Bios revision: 12-2004 (0F08.P00)
-Bios Type: Phoenix BIOS
-Bios Download Link: http://downloads.emachines.com/drivers/bios/M6805_Shadow-K8.exe
-IMPORTANT: There are 2 Modiifed Bios files found in the ROM folder - I am not sure of which one to use and so, I leave it to you and your emachine.
-Winflash Bios Update Tool Included - However, I strongly recommend to flash bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename 0F08P00E_SLIC.ROM to 0F08P00E.ROM OR NSF04P0E_SLIC.ROM to NSF04P0E.ROM and at command prompt in DOS, type: ph161700 /x /mode=3 /force <NameOfModifiedBiosFile> <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: SSV2 - Default Settings - RW Everything Report Not Included because No SLIC is in Bios File
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Emachines_M6805-Emachines-12-2004-0F08.P00-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Emachines/Emachines_M6805-Emachines-12-2004-0F08.P00.rar

[anko]

Motherboard Manufacturer and Model: Acer TravelMate 5520G (laptop)
-Bios revision: 1.17
-Bios Type: Phoenix
-Bios SLIC: Acer 2.1
-Bios Link: Acer 1.17 (http://global-download.acer.com/GDFiles%5CBIOS/BIOS/BIOS_Acer_1.17_A_A.zip?acerid=633801392318642909&Step1=Notebook&Step2=TravelMate&Step3=TravelMate%205520G&OS=V10&LC=en&SC=EMEA_27)

Thanks in advance!

[Busykid508]

Hi, I had requested this mod before Acer SLIC 2.1 became available and it was done using HP. I'd like to have it done with Acer SLIC 2.1 if possible.

The bios comes with Acer SLIC 2.0 for Vista so I guess it just needs to be swapped for 2.1?

Here is the info:

Notebook: Acer TravelMate 4202wlmi
BIOS Company: Phoenix
Bios Version: 3.10
Bios Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
Bios already contains Acer SLIC 2.0 and Acer SLP
Requesting Acer SLIC 2.1 for Windows 7

Thanks in advance, I really appreciate it!! :)

Apparently, you did not read the rules....YOU MUST provide the following BEFORE we modify your bios....

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

Motherboard Manufacturer and Model: Acer TravelMate 5520G (laptop)
-Bios revision: 1.17
-Bios Type: Phoenix
-Bios SLIC: Acer 2.1
-Bios Link: Acer 1.17 (http://global-download.acer.com/GDFiles%5CBIOS/BIOS/BIOS_Acer_1.17_A_A.zip?acerid=633801392318642909&Step1=Notebook&Step2=TravelMate&Step3=TravelMate%205520G&OS=V10&LC=en&SC=EMEA_27)

Thanks in advance!

Please read the rules....we need this below before we can modify the bios

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[ciscokid]

Apparently, you did not read the rules....YOU MUST provide the following BEFORE we modify your bios....

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.
Here you go, sorry about that, I have attached the acpitbls.rw as a zip file for you. Thank you.

[willche]

-Motherboard Manufacturer and Model : Notebook Fujitsu S6520
-revision : 1.23
-Bios Type : Phoenix
-Bios SLIC : Fujitsu
-Bios Link : http://www.box.net/shared/mqs9gmjoff

Hi BusyKids
Sorry About the wrong links
here is the updated one

[willche]

-Motherboard Manufacturer and Model : Notebook Fujitsu S6520
-revision : 1.23
-Bios Type : Phoenix
-Bios SLIC : Fujitsu
-Bios Link : http://www.box.net/shared/mqs9gmjoff
-ACPI Table : http://www.box.net/shared/sv65myme3x

[anko]

Please read the rules....we need this below before we can modify the bios

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

ok, i'll do that, but first i would like to ask u if this software runs on 64bit windows because i currently run Windows 7 x64.
and sorry for not posting the correct files but i hadn't read the rules cause i thought it was the same like award bios.

[KillerJupe]

Actually, this one was pretty simple to do...

-Manufacturer: SONY
-Motherboard Model: VAIO CR vgn-cr353
-Bios revision: R2101Q0
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Sony/SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0.rar


Thanks found the app however, one last request w/ this file. it says its only 660kb for the dl. when i go to extract it w/ winrar its corrupted and says its too small also. is it just my side or maybe it wasn't fully uploaded?
I don't wanna flash a corrupted bios :(
hopefully a re-upload will fix the problem
Thanks

[Busykid508]

ok, i'll do that, but first i would like to ask u if this software runs on 64bit windows because i currently run Windows 7 x64.
and sorry for not posting the correct files but i hadn't read the rules cause i thought it was the same like award bios.

A bios file does not care if it is 64 bit or 32 bit...

[Vercetti]

Can you try with this BIOS


-Motherboard Manufacturer and Model : Toshiba A105 SP4021 PSAA8X-XXXX
-revision : 6.0
-Bios Type : Phoenix
-Bios SLIC : Toshiba 2.1
-Bios Link : http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip

[Busykid508]

Thanks found the app however, one last request w/ this file. it says its only 660kb for the dl. when i go to extract it w/ winrar its corrupted and says its too small also. is it just my side or maybe it wasn't fully uploaded?
I don't wanna flash a corrupted bios :(
hopefully a re-upload will fix the problem
Thanks

I don't blame you and I repackaged the file and you can download it from the link below


-Manufacturer: SONY
-Motherboard Model: VAIO CR vgn-cr353
-Bios revision: R2101Q0
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0.rar

[Busykid508]

Can you try with this BIOS

There will be no mod without the following


First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[kds1973]

-Motherboard Manufacturer and Model : Hewlett Packard Notebook dv2910us
-Bios Revision : F.2E
-Bios Type : Phoenix
-Bios SLIC : SLIC 2.1
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe

The Laptop came with slic 2.0 can you mod it to 2.1

[SumitB]

Thanks a ton!

Windows 7 activated using the embedded SLIC 2.1 and HP cert. Really really appreciated.

Thanks!
Sumit


-Manufacturer: HP
-Motherboard Model: Compaq Presario V6219TU Notebook PC (for Notebooks with Intel Processors - Microsoft Windows/Vista-Based)
-Bios revision: F.2D (sp42187.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42187.exe
-Source of Bios DOwnload Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67678-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3398100
-Winflash Bios Update Tool Included - However, I suggest you flash bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30BBF2D_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHoenix Mod Tool v0.032
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK RECOVERY FILES INCLUDED

HP_Compaq_Presario_V6219TU_Notebook_PC_for_Noteboo ks_with_Intel_Processors_and_Microsoft_Windows_Vis ta-Based-HP-F.2D_sp42187.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_V6219TU_Notebook_PC.rar

[Busykid508]

Thanks a ton!

Windows 7 activated using the embedded SLIC 2.1 and HP cert. Really really appreciated.

Thanks!
Sumit

Thank you....enjoy...:):D

[Vercetti]

I Forgot the link of the ACPI tables
Thanks Busykid508 for the advice


-Motherboard Manufacturer and Model : Toshiba A105 SP4021 PSAA8X-XXXX
-revision : 6.0
-Bios Type : Phoenix
-Bios SLIC : Toshiba 2.1
-Bios Link : http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-ACPI tables: http://www.mediafire.com/?mnjld95bjem

[Busykid508]

-Motherboard Manufacturer and Model : HP dv2910us
-Bios Revision : F.2E
-Bios Type : Phoenix
-Bios SLIC : SLIC 2.1
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe

The Laptop came with slic 2.0 can you mod it for 2.1?

This is your bios file and motherboard though the name of the computer is different

-Manufacturer: HP
-Motherboard Model: Pavilion dv2899es Artist Entertainment Notebook PC (For Notebook System BIOS - Microsoft Windows Vista Based)
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3696264&lc=en&cc=us&dlc=en&lang=en&cc=us
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH16 (Located in CRISDISK FOLDER) and bootable USB flash Drive - Rename 30CDF2E_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PHLASH16 /x BIOS.WPH <ENTER>
-SLIC: HPQOEMSLIC-MPC-HPQ.BIN 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.024
-Method: SSv2
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv2899es_Artist_Entertainment_Notebook _PC_For_Notebook_System_BIOS-Microsoft_Windows_Vista_Based-HP-F.2E_sp41959.exe-HPQOEMSLIC-MPC-HPQ.BIN_SLIC21_HP_SLP
http://slics.myftp.org//HP_Pavilion_dv2899es_Artist.rar

[Busykid508]

I Forgot the link of the ACPI tables
Thanks Busykid508 for the advice

You did the very thing that I asked you not to do...DO NOT RENAME THIS DAMN FILE...it screws up the report...this is an .RW format and not NOTEPAD and when you rename the file instead of using its default name, it messes with the parts that I need.

So, back to the end of the line for you....

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Vercetti]

Sorry, I just wast thinking about the name of the bios


-Motherboard Manufacturer and Model : Toshiba A105 SP4021 PSAA8X-XXXX
-revision : 6.0
-Bios Type : Phoenix
-Bios SLIC : Toshiba 2.1
-Bios Link : http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-ACPI tables: http://www.sendspace.com/file/mga9c5

[Busykid508]

Sorry, I just wast thinking about the name of the bios

I already had the name of your and I don't need another name...just follow instructions please...this is getting ridiculous with all these requests and no one pays attention.

From now on, from this day forwarded, those who do not submit an RW Everything Report and who RENAME the file if they do submit an rw report, will get nothing from this forum....at least not from me.

-Manufacturer: TOSHIBA
-Motherboard Model: A105 SP4021 PSAA8X-XXXX
-Bios revision: 6.00
-Bios Type: Phoenix BIOS
-Bios Download Link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-Winflash Bios Update Tool Included - However I strongly suggest to use PHLASH17 (PH161700) on bootable USB Flash Drive - Rename S10PM600_SLIC.ROM to S10PM600.ROM OR S10GM600_SLIC.ROM to S10GM600.ROM and at command prompt in DOS, type: ph161700 <NameOfModifiedBiosFile> /x /s /force <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

TOSHIBA_A105_SP4021_PSAA8X-XXXX_TOSHIBA-6.00-Toshiba[TOSINVTOSINV00-INV]2.1_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_A105_SP4021_PSAA8X-XXXX_TOSHIBA-6.00.rar

[josvic]

-Motherboard Manufacturer and Model : Acer Travelmate 7720g
-Bios Revision : 1.35
-Bios Type : Phoenix
-Bios SLIC : unknown
-Bios Link : ftp://ftp.work.acer-euro.com/notebook/travelmate_7720/bios/v1.35.zip

Please mod BIOS for SLIC 2.1

[Busykid508]

-Motherboard Manufacturer and Model : Acer Travelmate 7720g
-Bios Revision : 1.35
-Bios Type : Phoenix
-Bios SLIC : unknown
-Bios Link : ftp://ftp.work.acer-euro.com/notebook/travelmate_7720/bios/v1.35.zip

Please mod BIOS for SLIC 2.1

And where is my rw everything report? If you cannot provide it as outlined in the first post of this forum, you get no mod...

WARNING - YOU MUST PROVIDE AN RW EVERYTHING REPORT OR YOU WILL NOT GET YOUR MOD -


-Motherboard Manufacturer and Model :
-Bios Revision :
-Bios Type :
-Bios SLIC :
-Bios Link :
-Rw-everything report. How to is found at : http://forums.mydigitallife.info/announcement.php?f=4

Please don't forget to provide the rw-everything report. It makes it a lot easier to mod a Phoenix bios, thank you.
When you have got your biosmod and it's confirmed to work, please edit your request post and add the link and info to it. Thank you again.

To realise a Phoenix mod still takes time. You have to be patient, it may take several days.

@Modders: You have to be familiar with the 'Lenovo' process. A mod made by PBE and rebuilt by PBE may brick the Notebook.
Please don't provide a mod that was rebuilt with PBE! Thanks!!!!

[kds1973]

This is your bios file and motherboard though the name of the computer is different

-Manufacturer: HP
-Motherboard Model: Pavilion dv2899es Artist Entertainment Notebook PC (For Notebook System BIOS - Microsoft Windows Vista Based)
-Bios revision: F.2E (sp41959.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41959.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3696264&lc=en&cc=us&dlc=en&lang=en&cc=us
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH16 (Located in CRISDISK FOLDER) and bootable USB flash Drive - Rename 30CDF2E_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PHLASH16 /x BIOS.WPH <ENTER>
-SLIC: HPQOEMSLIC-MPC-HPQ.BIN 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.024
-Method: SSv2
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv2899es_Artist_Entertainment_Notebook _PC_For_Notebook_System_BIOS-Microsoft_Windows_Vista_Based-HP-F.2E_sp41959.exe-HPQOEMSLIC-MPC-HPQ.BIN_SLIC21_HP_SLP
http://slics.myftp.org//HP_Pavilion_dv2899es_Artist.rar



-Status: CONFIRMED WORKING!
- Make Sure You Use the command when flashing your bios:
type: PHLASH16 BIOS.WPH /o /force /x /c /s <ENTER>
This Works without any problems.

[hng]

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite M305-S4848
-Bios revision: 3.20
-Bios Type: Phoenix BIOS
-Bios Download Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/smd8v320_64.exe
-Source of Bios Download Link: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download
-Winflash Bios Update TOols Included - I strongly recommend to Flash Bios in DOS using PHLASH16 (Located in Boot Folder) on a bootable USB Flash Drive - Rename te1m3i55_slic.wph to te1m3i55.wph and At command prompt in DOS, type: phlash16 te1m3i55.wph /x /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: Toshiba
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: DYNAMIC - Ticked ONLY Replace SLIC Elements of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

TOSHIBA_Satellite_M305-S4848-Toshiba-3.20-Toshiba[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satellite_M305-S4848-Toshiba-3.20.rar

Well, It bricked my laptop (my risk). Anyway, I tried to recover the bios but the *.whp is 2MB side so I can not put it on floppy, also tried USB thumb drive but it seems not to boot from it (only from USB floppy).
Any idea, would appreciate your help (I did try all the methods and NO LUCK).

Thanks in advannce

[Busykid508]

Well, It bricked my laptop (my risk). Anyway, I tried to recover the bios but the *.whp is 2MB side so I can not put it on floppy, also tried USB thumb drive but it seems not to boot from it (only from USB floppy).
Any idea, would appreciate your help (I did try all the methods and NO LUCK).

Thanks in advannce

I hear what you are saying about your computer being bricked but below illustrates what a person faces when they see your particular bios.

The top picture of what a mod must look for and must fill in the holes with the new SLIC v2.1.

The second or bottom picture is the results of modification and it shows that the Header, Pubkey and Marker are all covered by an approporate SLIC 2.1 of Toshiba

http://img387.imageshack.us/img387/8614/toshiba.png

[Busykid508]

-Status: CONFIRMED WORKING!
- Make Sure You Use the command when flashing your bios:
type: PHLASH16 BIOS.WPH /o /force /x /c /s <ENTER>
This Works without any problems.

thanks for that good news...:):D

[hng]

I hear what you are saying about your computer being bricked but below illustrates what a person faces when they see your particular bios.

The top picture of what a mod must look for and must fill in the holes with the new SLIC v2.1.

The second or bottom picture is the results of modification and it shows that the Header, Pubkey and Marker are all covered by an approporate SLIC 2.1 of Toshiba.

Is there anyway to make the bios *.whp down size to fit the floppy. My laptop seems to boot floppy and I think because the *.whp (default) is wrong that why not able to recover correctly

[Busykid508]

I hear what you are saying about your computer being bricked but below illustrates what a person faces when they see your particular bios.

The top picture of what a mod must look for and must fill in the holes with the new SLIC v2.1.

The second or bottom picture is the results of modification and it shows that the Header, Pubkey and Marker are all covered by an approporate SLIC 2.1 of Toshiba.

Is there anyway to make the bios *.whp down size to fit the floppy. My laptop seems to boot floppy and I think because the *.whp (default) is wrong that why not able to recover correctly

There is no way to do that to a bios without causing more harm to your com0puter....in the download, there is a crisdisk of how to use a Pen Drive to create a Phoenix Bios Rescue Disk...have you followed instructions in that folder?

[mr-bond]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Acer Aspire 4920
BIOS revision: 1.20
BIOS Type: Phoenix
Bios SLIC : 2.0 need 2.1
BIOS link download:http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_v1.20.zip?acerid=633643258004215929&Step1=Notebook&Step2=Aspire&Step3=Aspire

[Busykid508]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Acer Aspire 4920
BIOS revision: 1.20
BIOS Type: Phoenix
Bios SLIC : 2.0 need 2.1
BIOS link download:http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_v1.20.zip?acerid=633643258004215929&Step1=Notebook&Step2=Aspire&Step3=Aspire

CAN'T YOU READ THE RULES....they are posted on the first page and everywhere else on this forum...

WHERE IS THE RW EVERYTHING REPORT?

You do not get a mod until you produce that report.

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[bensuslu11]

I need SLIC 2.1 bios modded for Windows 7 please!!
my computer is oem pc toshiba A100-599
Manufacturer: toshiba
Model: a100-599
bios type : PHOENİX

bios :http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip

acpitbls.rw: http://www.sendspace.com/file/p61duk

[Cwelle]

Could someone add SLIC 2.1 for Win 7?

-Motherboard Manufacturer and Model : HP Pavilion dv6595eg Notebook
-Bios Revision : F.59 A
-Bios Type : Phoenix
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe
-Rw-everything report: http://www.mediafire.com/?sharekey=0faaef887f2896c4931c7453395df025f3c07cfd 523c0db2ce018c8114394287

[Busykid508]

I need SLIC 2.1 bios modded for Windows 7 please!!
my computer is oem pc toshiba A100-599
Manufacturer: toshiba
Model: a100-599
bios type : PHOENİX

bios :http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip

acpitbls.rw: http://www.sendspace.com/file/p61duk

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite A100-599
-Bios revision: 6.00
-Bios Type: Phoenix BIOS
-Bios Download Link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-IMPORTANT - There are 2 Modiifed Bios Files Included - One Modified Bios file is S10PM600_SLIC.ROM and you need to rename it to S10PM600.ROM before using. The second Modified Bios File is S10GM600_SLIC.ROM and you need to rename to S10GM600.ROM before using.
-Winflash Bios Update TOols Included - I strongly recommend to Flash Bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive. At command prompt in DOS, type: ph161700 <NameOfModifedBiosFile> /x /force /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: Toshiba
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

TOSHIBA_Satellite_A100-599-Toshiba-6.00-TOSCPLTOSCPL00.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satellite_A100-599-Toshiba-6.00.rar

[Busykid508]

Could someone add SLIC 2.1 for Win 7?

-Motherboard Manufacturer and Model : HP Pavilion dv6595eg Notebook
-Bios Revision : F.59 A
-Bios Type : Phoenix
-Bios Link : ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe
-Rw-everything report: http://www.mediafire.com/?sharekey=0faaef887f2896c4931c7453395df025f3c07cfd 523c0db2ce018c8114394287

This is your bios and motherboard though the name of the computer is not yours.

-Manufacturer: HP
-Motherboard Model: Pavilion dv6500 CTO Entertainment Notebook PC (Intel Processor Edition)
-Bios revision: F.59A (sp42153.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67682-1&lc=en&dlc=en&cc=us&product=3380544&os=2100&lang=en
-Winflash Bios Update Tool Included - However, I strongly recommend to use PHLASH17 (PH161700) on bootable USB Flash Drive. Rename 30CCF59_SLIC.WHP to BIOS.WPH and At command prompt in DOS, type ph161700 /x bios.wph
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.32
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv6500_CTO_Entertainment_Notebook_PC_I NTEL_Processor_EDTION-HP-F.59A_sp42153.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_dv6500_CTO_Entertainment_Notebook_PC.r ar

[larrysil]

Request SLIC 2.1 for Gateway CX2610

-Motherboard Manufacturer and Model : Gateway CX2610
-Bios Revision : 62.07
-Bios Type : Pheonix
-Bios SLIC : 2.1
-Bios Link : ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/bios/portables/gateway/M280/6207.exe

Thanks.

[Busykid508]

Request SLIC 2.1 for Gateway CX2610

-Motherboard Manufacturer and Model : Gateway CX2610
-Bios Revision : 62.07
-Bios Type : Pheonix
-Bios SLIC : 2.1
-Bios Link : ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/bios/portables/gateway/M280/6207.exe

Thanks.

PLEASE READ THE RULES....the rules say YOU MUST PROVIDE AN RW EVERYTHING REPORT - If I don't get an RW Everything Report, you do not get a mod...it is that simple.

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[larrysil]

Request SLIC 2.1 for Gateway CX2610

-Motherboard Manufacturer and Model : Gateway CX2610
-Bios Revision : 62.07
-Bios Type : Pheonix
-Bios SLIC : 2.1
-Bios Link : ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/bios/portables/gateway/M280/6207.exe

Thanks.
-Rw-everything report: http://www.mediafire.com/?w4i0zvcqnzt

Thanks.

[bensuslu11]

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite A100-599
-Bios revision: 6.00
-Bios Type: Phoenix BIOS
-Bios Download Link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-IMPORTANT - There are 2 Modiifed Bios Files Included - One Modified Bios file is S10PM600_SLIC.ROM and you need to rename it to S10PM600.ROM before using. The second Modified Bios File is S10GM600_SLIC.ROM and you need to rename to S10GM600.ROM before using.
-Winflash Bios Update TOols Included - I strongly recommend to Flash Bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive. At command prompt in DOS, type: ph161700 <NameOfModifedBiosFile> /x /force /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: Toshiba
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

TOSHIBA_Satellite_A100-599-Toshiba-6.00-TOSCPLTOSCPL00.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satellite_A100-599-Toshiba-6.00.rar

help. error. what a cant it.

[gmznet]

Here you go :d

http://dl.getdropbox.com/u/747181/Samsung%20R510%20ASS3%2007LI%20Acer%202.1%20SLIC%2 0By%201234s282.zip

Acer 2.1 SLIC - Enjoy!

1234s282

Works great!!! Thanks. :D

[Busykid508]

-Rw-everything report: http://www.mediafire.com/?w4i0zvcqnzt

Thanks.

-Manufacturer: Gateway
-Motherboard Model: CX2610
-Bios revision: 62.07
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/bios/portables/gateway/M280/6207.exe
-Winflash Bios Udate Tool Included - However, I strongly suggest to flash bios in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename Modified Bios File 6207_SLIC.WPH to 6207.WPH and at commad prompt in DOS, type: ph161700 /s /x /force /mode=3 6207.WPH <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2,1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSV2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

Gateway_CX2610-Gateway-62.07-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Gateway/Gateway_CX2610-Gateway-62.07.rar

[Busykid508]

help. error. what a cant it.

What is the error message....

when you say, what a cant it, that makes no sense at all.

[bensuslu11]

http://rapidshare.com/files/117051180/ph.oe.nixbi.os.editor2201_-_www.massrush.com.rar

this program help me? and you_?


please send a flash video_?

[Busykid508]

http://rapidshare.com/files/117051180/ph.oe.nixbi.os.editor2201_-_www.massrush.com.rar

this program help me? and you_?


please send a flash video_?

Help you do what? you have not told me your problem...what is the error message?

[Busykid508]

http://rapidshare.com/files/117051180/ph.oe.nixbi.os.editor2201_-_www.massrush.com.rar

this program help me? and you_?


please send a flash video_?

No, I am not sending a flash video...I have yet to figure out what you want from me. There already is a newer version of PBE and I have no need for you version..thanks.

[bensuslu11]

are you connect my pc. and you are help me_? do you agree me_??

[Busykid508]

are you connect my pc. and you are help me_? do you agree me_??

Help you to do what?

I am not going to help you flash your bios....that is your job and not mine and I will not be responsible for it...

So, no, I will not connect my PC to yours...sorry but I mod the bios for you and it is up to you and not me to make it work when flashing the bios.

[DavidO]

-Motherborad Manufacturer and Model: Tyan TigerMPX S2466N-4M
-BIOS Revision: 4.06
-BIOS Type: Phoenix
-BIOS SLIC: 2.1
-BIOS Link: ftp://ftp.tyan.com/bios/2466_406.ZIP

[Busykid508]

-Motherborad Manufacturer and Model: Tyan TigerMPX S2466N-4M
-BIOS Revision: 4.06
-BIOS Type: Phoenix
-BIOS SLIC: 2.1
-BIOS Link: ftp://ftp.tyan.com/bios/2466_406.ZIP

You will not get a mod until you provide us the RW Everything Report which is posted as a prerequisite before we mod your bios

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[CessBlue]

Can somebody mod this BIOS for me, please? Thank you very much.

-Motherboard Manufacturer and Model: Lenovo IdeaPad Y450
-Bios Revision: 17CN28WW64
-Bios Type: Phoenix
-Bios SLIC: Want Lenovo SLIC 2.1 to go with the Lenovo laptop.
-Bios Link: http://consumerdl.lenovo.com.cn/UserFiles/Driver/en/Downloads and Drivers/Y450/Vista-64/17CN28WW(x64).exe
-Rw-everything report: http://www.mediafire.com/download.php?gruhroyy3zl

[911medic]

-Motherborad Manufacturer and Model: Tyan TigerMPX S2466N-4M
-BIOS Revision: 4.06
-BIOS Type: Phoenix
-BIOS SLIC: 2.1
-BIOS Link: ftp://ftp.tyan.com/bios/2466_406.ZIP

HP SLIC 2.1 = http://slics.myftp.org/Tyan/TYAN_2466_406_HP_SLIC2.1.rar

This should be very uncomplicated bios. Please upload a rweverything report for my own troubleshooting and QA..Post flash please.

FEedback please!!!

[xbc]

-Motherboard Manufacturer and Model : Satellite L25-S1216
-Bios Revision : 2.20
-Bios Type : Phoenix
-Bios SLIC : 1.0 (probably)
-Bios Link : http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L25-S1216&rpn=PSL2XU&category=&selCategory=3&moid=1209126&os=&ct=DL&selFamily=1073768663

it is the second link (stupid ajax window won't let me get the direct link)

-Rw-everything report. (attached)

A slic 2.1 would be nice, thanks in advance

[jse]

I am reposting this request with an RW report (thanks to RW:s creator Jeff for helping me out with the access exception errors).

-Motherboard Manufacturer and Model: Fujitsu Lifebook E8210 (ATI-Graphics)
-Bios Revision: 1.23
-Bios Type: Phoenix
-Bios SLIC: unknown, suitable 2.1 wanted, for Vista And W7
-Bios Link: http://www.mediafire.com/?nyrtjdjmbwq
-Complete extracted bios diskette image: http://www.mediafire.com/?2mjgrumvynd

-Rw-everything report: http://www.mediafire.com/?tkwggmz13wx


Thanks,
/Johan


Can someone confirm that this request is not forgotten?
/Johan

[Busykid508]

-Motherboard Manufacturer and Model : Satellite L25-S1216
-Bios Revision : 2.20
-Bios Type : Phoenix
-Bios SLIC : 1.0 (probably)
-Bios Link : http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L25-S1216&rpn=PSL2XU&category=&selCategory=3&moid=1209126&os=&ct=DL&selFamily=1073768663

it is the second link (stupid ajax window won't let me get the direct link)

-Rw-everything report. (attached)

A slic 2.1 would be nice, thanks in advance

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite L25-S1216
-Bios revision: 2.20
-Bios Type: Phoneix BIOS
-Bios Download Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/sl25xv22.exe
-Source of Bios Download Link: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L25-S1216&rpn=PSL2XU&category=&selCategory=3&moid=1209126&os=&ct=DL&selFamily=1073768663
-WINFLASH and PHLASH16 (Located in BOOT FOLDER) Bios Update ToolS Included - I strongly suggest for you to flash bios in DOS using PHLASH16 on a bootable USB flash Drive. Rename EW6_3A27_SLIC.WPH to EW6_3A27.WPH and at command prompt in DOS, type: phlash16 EW6_3A27.WPH /x /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSv2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

TOSHIBA_Satelite_L25-S1216-TOSHIBA-2.20-Toshiba[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satelite_L25-S1216-TOSHIBA-2.20.rar

[mr-bond]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Acer Aspire 4920 G
BIOS revision: 1.20
BIOS Type: Phoenix
Bios SLIC : 2.0 need 2.1
BIOS link download:http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_v1.20.zip?acerid=633643258004215929&Step1=Notebook&Step2=Aspire&Step3=Aspire
Rw-everything report: http://www.mediafire.com/download.php?mtmon0giyzm

[Vercetti]

-Manufacturer: TOSHIBA
-Motherboard Model: A105 SP4021 PSAA8X-XXXX
-Bios revision: 6.00
-Bios Type: Phoenix BIOS
-Bios Download Link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20071126124517.zip
-Winflash Bios Update Tool Included - However I strongly suggest to use PHLASH17 (PH161700) on bootable USB Flash Drive - Rename S10PM600_SLIC.ROM to S10PM600.ROM OR S10GM600_SLIC.ROM to S10GM600.ROM and at command prompt in DOS, type: ph161700 <NameOfModifiedBiosFile> /x /s /force <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.032
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

TOSHIBA_A105_SP4021_PSAA8X-XXXX_TOSHIBA-6.00-Toshiba[TOSINVTOSINV00-INV]2.1_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_A105_SP4021_PSAA8X-XXXX_TOSHIBA-6.00.rar

Reported as Working: Another one for Busykid508

[Busykid508]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Acer Aspire 4920 G
BIOS revision: 1.20
BIOS Type: Phoenix
Bios SLIC : 2.0 need 2.1
BIOS link download:http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_v1.20.zip?acerid=633643258004215929&Step1=Notebook&Step2=Aspire&Step3=Aspire
Rw-everything report: http://www.mediafire.com/download.php?mtmon0giyzm

This one has been modified in the past

-Manufacturer: ACER
-Motherboard Model: aspire 4920G
-Bios revision: 1.20
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.mediafire.com/download.php?jqyozezwzxx
-WINFLASH BIOS UPDATE TOOL INCLUDED- Winflash Bios Update Tool has the new SLIC v2.1 embedded in the executable file. Rename TH-120_SLIC.EXE to TH-120.EXE before executing the file.
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.028
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

ACER_Aspire_4920G-Acer-1.20-DELL_SLIC21_DELL_SLP
http://slics.myftp.org//ACER_Aspire_4920G-Acer-1.20.rar

[Busykid508]

Reported as Working: Another one for Busykid508

Thank you for the information....enjoy.:):D

[ciscokid]

Busykid508, here is my re-post of my request, along with the RW report as requested by you.

The bios comes with Acer SLIC 2.0 for Vista so I guess it just needs to be swapped for 2.1?

Here is the info:

Notebook: Acer TravelMate 4202wlmi
BIOS Company: Phoenix
Bios Version: 3.10
Bios Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
Bios already contains Acer SLIC 2.0 and Acer SLP
Requesting Acer SLIC 2.1 for Windows 7
I am attaching the RW report for you in zip format, I did not rename anything.

Thanks in advance, I really appreciate it!!

[amitabh15]

I have included the RW ACPI dump as requested

Here is the info:

Notebook: HP tx1304ca
BIOS Company: Phoenix
Bios Version: F.20
Bios Link: ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39359.exe
Requesting HP SLIC 2.1 for Windows 7
I am attaching the RW report for you.

Thanks in advance, I really appreciate it!!

[xbc]

Toshiba L25 Mod is working......

Thanks Busykid508.... the mod was perfect

[Busykid508]

I have included the RW ACPI dump as requested

Here is the info:

Notebook: HP tx1304ca
BIOS Company: Phoenix
Bios Version: F.20
Bios Link: ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39359.exe
Requesting HP SLIC 2.1 for Windows 7
I am attaching the RW report for you.

Thanks in advance, I really appreciate it!!

And you did the very thing that I put in BOLD CAPITAL LETTERS for you to NOT DO - DO NOT RENAME THIS RW EVERYTHING REPORT - SAVE IT TO ITS DEFAULT NAME.

This mistake would have delayed your mod -

However, you are lucky for I happen to have your bios modified on a previous occassion and proven to have worked. But from now on if you submit another Phoenix Bios Mod Request, submit an RW Everything Report and DO NOT RENAME THIS FILE.

Below is your bios and motherboard though the name is different than your computer.

-Manufacturer: HP
-Motherboard Model: Pavilion tx1301au Notebook PC (For Notebook System BIOS with AMD Processors and Microsoft Windows Vista Based)
-Bios revision: F.20 (sp39359.exe)
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39359.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-60760-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3543756
-WINFLASH Flash Bios Utilities Included - However, I strongly recommend you flash the bios in DOS using PHLASH17 (PH161700) on bootable USB flash Drive - Rename 30BFF20_SLIC.WPH to BIOS.WPH and at the command prompt in DOS, type: PH161700 /x BIOS.WPH <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked Only Replace SLIC Elements of RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_tx1301au_Notebook_PC_For_Notebook_Syst em_BIOS_with_AMD_Processors_and_Microsoft_Windows_ Vista_Based-HP-F.20_sp39359.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_tx1301au_Notebook_PC.rar

[Busykid508]

Toshiba L25 Mod is working......

Thanks Busykid508.... the mod was perfect

Thank you for the information


-Manufacturer: TOSHIBA
-Motherboard Model: Satellite L25-S1216
-Bios revision: 2.20
-Bios Type: Phoneix BIOS
-Bios Download Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/sl25xv22.exe
-Source of Bios Download Link: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L25-S1216&rpn=PSL2XU&category=&selCategory=3&moid=1209126&os=&ct=DL&selFamily=1073768663
-WINFLASH and PHLASH16 (Located in BOOT FOLDER) Bios Update ToolS Included - I strongly suggest for you to flash bios in DOS using PHLASH16 on a bootable USB flash Drive. Rename EW6_3A27_SLIC.WPH to EW6_3A27.WPH and at command prompt in DOS, type: phlash16 EW6_3A27.WPH /x /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSv2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

TOSHIBA_Satelite_L25-S1216-TOSHIBA-2.20-Toshiba[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satelite_L25-S1216-TOSHIBA-2.20.rar

[Busykid508]

Busykid508, here is my re-post of my request, along with the RW report as requested by you.

The bios comes with Acer SLIC 2.0 for Vista so I guess it just needs to be swapped for 2.1?

Here is the info:

Notebook: Acer TravelMate 4202wlmi
BIOS Company: Phoenix
Bios Version: 3.10
Bios Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
Bios already contains Acer SLIC 2.0 and Acer SLP
Requesting Acer SLIC 2.1 for Windows 7
I am attaching the RW report for you in zip format, I did not rename anything.

Thanks in advance, I really appreciate it!!

-Manufacturer: ACER
-Motherboard Model: TravelMate 4202wlmi
-Bios revision: 3.10
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
-Winflash and PHLASH17 (PH161700) DOS Bios Update Tools Included - I strongly suggest flashing bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive - Rename BL50310A_SLIC.WPH to BL50310A.WPH and at command prompt in DOS, type: ph161700 BL50310A.WPH /mode=3 /x <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

ACER_Travelmat_4202wlmi-Acer-3.10-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Acer/ACER_Travelmat_4202wlmi-Acer-3.10.rar

[mr-bond]

This one has been modified in the past

-Manufacturer: ACER
-Motherboard Model: aspire 4920G
-Bios revision: 1.20
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.mediafire.com/download.php?jqyozezwzxx
-WINFLASH BIOS UPDATE TOOL INCLUDED- Winflash Bios Update Tool has the new SLIC v2.1 embedded in the executable file. Rename TH-120_SLIC.EXE to TH-120.EXE before executing the file.
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.028
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS Recovery Files Included

ACER_Aspire_4920G-Acer-1.20-DELL_SLIC21_DELL_SLP
http://slics.myftp.org//ACER_Aspire_4920G-Acer-1.20.rar

i have Update to the new SLIC v2.1 and work great on vista not tested on window 7 yet

[tng_fr]

OEM Type: Compaq Presario S4000NX
Motherboard Manufacturer and Model : TriGem Glendale / GL VE 2002052
Bios Revision : 3.24
Bios Type : Phoenix
Bios SLIC : None included; request HP 2.1
Bios Link : ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe

Attached RW-everything report. Thanks alot

[Busykid508]

OEM Type: Compaq Presario S4000NX
Motherboard Manufacturer and Model : TriGem Glendale / GL VE 2002052
Bios Revision : 3.24
Bios Type : Phoenix
Bios SLIC : None included; request HP 2.1
Bios Link : ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe

Attached RW-everything report. Thanks alot

-Manufacturer: HP
-Motherboard Model: Compaq Presario S4000NX Desktop PC (BIOS Update for GL_VE Motherboards)
-Bios revision: 3.24 (sp23989.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-15624-1&lc=en&dlc=en&cc=us&lang=en&os=228&product=329399
-Winflash Bios Update Tools Included - However, I strongly suggest to FLASH BIOS in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

HP_Compaq_Presario_S4000NX_Desktop_PC_BIOS_Update_ for_GL_VE_Motherboards-HP_Compaq-3.24_sp23989.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_S4000NX_Desktop_PC.rar

[Busykid508]

i have Update to the new SLIC v2.1 and work great on vista not tested on window 7 yet

Thank you for this information....and I already know this mod will activate Windows 7 with no problems

[ndtemple417]

HP
bios revision is f.34
bios type is phoenix
bios link is ftp://ftp.hp.com/pub/softpaq/sp28501-29000/sp28962.exe
bios slic there is none request hp 2.1
thank you so much for your time i not sure i was gonna try myself but didn't wanna mess it up so if you would please mod this bios thank you so much
by the way the model for the laptop is
hp pavilion zd7020us and it should also work for zx9500 thanks again

[tng_fr]

-Manufacturer: HP
-Motherboard Model: Compaq Presario S4000NX Desktop PC (BIOS Update for GL_VE Motherboards)
-Bios revision: 3.24 (sp23989.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-15624-1&lc=en&dlc=en&cc=us&lang=en&os=228&product=329399
-Winflash Bios Update Tools Included - However, I strongly suggest to FLASH BIOS in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

HP_Compaq_Presario_S4000NX_Desktop_PC_BIOS_Update_ for_GL_VE_Motherboards-HP_Compaq-3.24_sp23989.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_S4000NX_Desktop_PC.rar

Sorry, where is modded WPH file? I didn't see it in the RAR

[Busykid508]

Sorry, where is modded WPH file? I didn't see it in the RAR

Sorry, I forgot to add it to the upload...it is uploading now and is included...thanks for letting me know....

Give it a few minutes to upload to the server before downloading it.

-Manufacturer: HP
-Motherboard Model: Compaq Presario S4000NX Desktop PC (BIOS Update for GL_VE Motherboards)
-Bios revision: 3.24 (sp23989.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-15624-1&lc=en&dlc=en&cc=us&lang=en&os=228&product=329399
-Winflash Bios Update Tools Included - However, I strongly suggest to FLASH BIOS in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

HP_Compaq_Presario_S4000NX_Desktop_PC_BIOS_Update_ for_GL_VE_Motherboards-HP_Compaq-3.24_sp23989.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_S4000NX_Desktop_PC.rar

[mr-bond]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Dell XPS/Dimension 400/9150
BIOS revision: A07
BIOS Type: Phoenix
Bios SLIC : need 2.1
BIOS link download: http://www.mediafire.com/download.php?qmzdcmqnngj
Rw-everything report: http://www.mediafire.com/download.php?yjywcjndiit

[Busykid508]

HP
bios revision is f.34
bios type is phoenix
bios link is ftp://ftp.hp.com/pub/softpaq/sp28501-29000/sp28962.exe
bios slic there is none request hp 2.1
thank you so much for your time i not sure i was gonna try myself but didn't wanna mess it up so if you would please mod this bios thank you so much
by the way the model for the laptop is
hp pavilion zd7020us and it should also work for zx9500 thanks again

-Manufacturer: HP
-Motherboard Model: Pavilion zd7020US Notebook PC (WinFlash for HP Notebook System BIOS - Windows-Based)
-Bios revision: F.34 (sp28962.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp28501-29000/sp28962.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=hb-24923-1&lc=en&dlc=en&cc=us&product=353538&os=228&lang=en
-IMPORTANT: There are 4 Modified Bios Files in this Download. Rename RYAN1F34_SLIC.Q36 to RYAN1F34.Q36 AND RYAN1F34_SLIC.Q34 to RYAN1F34.Q34 AND RYAN1F34_SLIC.P34 to RYAN1F34.P34 AND RYAN1F34_SLIC.P31 to RYAN1F34.P31 before flashing bios.
-Winflash Bios Update Tool Included - There are 4 Modified Bios Files included - To determine which of the 4 files to flash your bios, double click on sp28962.exe and let it show the particular bios file for your system. You may flash your drive with this NON-modified version without harm. Find the Bios File recommended by sp28962.exe and flash MODIFIED BIOS in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive and at command prompt in DOS, type: ph161700 /x <NameOftheModifiedBiosFile> <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.033
-Method: SSV2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

HP_Pavilion_zd7020US_Notebook_PC_WinFlash_for_HP_N otebook_System_BIOS_with_Windows-Based-HP-F.34_sp28962.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_zd7020US_Notebook_PC.rar

[ndtemple417]

hey thanks for modding for me but i can't download it could you up it somewhere else thanks so much

[Busykid508]

Manufacturer: Phoenix Technologies Ltd.
Motherboard Name : Dell XPS/Dimension 400/9150
BIOS revision: A07
BIOS Type: Phoenix
Bios SLIC : need 2.1
BIOS link download: http://www.mediafire.com/download.php?qmzdcmqnngj
Rw-everything report: http://www.mediafire.com/download.php?yjywcjndiit

First, you most likely are in the wrong forum because you have a Dell Dimension computer which contains a DELL Phoenix Bios which cannot be modified here....

Second, we are not able to unzip the bios file....

But the second point is moot since your bios falls in a special category...please use the search engines to find DELL Mod Requests and place your request there.

[Busykid508]

hey thanks for modding for me but i can't download it could you up it somewhere else thanks so much

Try downloading it now - I think you tried to download it while it was still uploading to the server....you should be able to download it now..:):D

[ndtemple417]

nope unfortunately not do i need to do anything special i tried ie and firefox and right clicked and chose save as again thanks already for your efforts i really appreciate it

[Busykid508]

nope unfortunately not do i need to do anything special i tried ie and firefox and right clicked and chose save as again thanks already for your efforts i really appreciate it

Try this one:
http://www.box.net/shared/oe8qqeb61q

[wolf69]

First, you most likely are in the wrong forum because you have a Dell Dimension computer which contains a DELL Phoenix Bios which cannot be modified here....

Second, we are not able to unzip the bios file....

But the second point is moot since your bios falls in a special category...please use the search engines to find DELL Mod Requests and place your request there.

It wont do any good on that model they can only update slic file already present and it dont have any

[kds1973]

-Motherboard Manufacturer and Model : HP Pavilion A6200N
-Bios Revision : 5.27 2008-08-04
-Bios Type : Phoenix
-Bios SLIC : 2.1
-Bios Link : ftp://ftp.hp.com/pub/softlib/software10/COL24520/pv-63120-1/sp37530.exe

Desktop PC has Vista Slic 2.0 need 2.1 added.

[Busykid508]

-Motherboard Manufacturer and Model : HP Pavilion A6200N
-Bios Revision : 5.27 2008-08-04
-Bios Type : Phoenix
-Bios SLIC : 2.1
-Bios Link : ftp://ftp.hp.com/pub/softlib/software10/COL24520/pv-63120-1/sp37530.exe

Desktop PC has Vista Slic 2.0 need 2.1 added.

-Manufacturer: HP
-Motherboard Model: Pavilion a6200n Desktop PC (MCP61PM-HM Motherboard BIOS Update)
-Bios revision: 5.27 (sp37530.exe)
-Bios Type: AWARD BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software10/COL24520/pv-63120-1/sp37530.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-63120-1&lc=en&dlc=en&cc=us&lang=en&os=2100&product=3548643
-Winflash Bios Update Tool Included - Rename NET5_SLIC.27 to NET5.27 and Flash BIOS using Winflash in Windows and follow on-screen instructions
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: AWARD Mod Tool v1.20
-Method: ISA
-Modifier: Busykid508
-Please provide feedback

HP_Pavilion_a6200n_Desktop_PC_MCP61PM-HM_Motherboard_BIOS_Update-HP-5.27_sp37530.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_a6200n_Desktop_PC.rar

[sirakayar]

Please MOD my BIOS to SLIC2.1 for Win7 Ultimate

-Manufacturer and Model = HP Pavillion dv6922et FR267EA notebook
-Motherboard Model = Quanta 30D2 79.2E
-Bios revision = F.58 A (sp39862.exe)
-Bios SLIC = Unknown
-Bios Type = Insyde
-Bios Link = ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39862.exe

Searched the forum but could not find it, please post link if aready modded for windows 7.
Thanks

[Busykid508]

Please MOD my BIOS to SLIC2.1 for Win7 Ultimate

-Manufacturer and Model = HP Pavillion dv6922et FR267EA notebook
-Motherboard Model = Quanta 30D2 79.2E
-Bios revision = F.58 A (sp39862.exe)
-Bios SLIC = Unknown
-Bios Type = Insyde
-Bios Link = ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39862.exe

Searched the forum but could not find it, please post link if aready modded for windows 7.
Thanks


And YOU FORGOT ONE VERY IMPORTANT PIECE - WHERE IS MY RW EVERYTHING REPORT WHICH IS REQUIRED BEFORE YOU GET A MOD.....AND YOUR BIOS IS NOT INSYDE BUT PHOENIX

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[Busykid508]

It wont do any good on that model they can only update slic file already present and it dont have any

That is not true...they can update a bios with no slic to SLIC v2.1...so, do put your request there

[wolf69]

That is not true...they can update a bios with no slic to SLIC v2.1...so, do put your request there
I already did and thats what they told me

[soup006]

Manufacturer: HP
Model: DX2200
Motherboard: MS-7254
Bios type: Phoenix - Award BIOS v6.00PG
Bios link: http://www.mediafire.com/?sharekey=a524666ce3a7a31b8ef1259ff1b60e81e04e75f6 e8ebb871

RW export: http://www.mediafire.com/?sharekey=a524666ce3a7a31b8ef1259ff1b60e81e04e75f6 e8ebb871

Has SLIC 2.0 but would like SLIC 2.1 using HP.

Thanks

[ndtemple417]

thanks busykid will let you know if it works later that linked worked

[Busykid508]

Manufacturer: HP
Model: DX2200
Motherboard: MS-7254
Bios type: Phoenix - Award BIOS v6.00PG
Bios link: http://www.mediafire.com/?sharekey=a524666ce3a7a31b8ef1259ff1b60e81e04e75f6 e8ebb871

RW export: http://www.mediafire.com/?sharekey=a524666ce3a7a31b8ef1259ff1b60e81e04e75f6 e8ebb871

Has SLIC 2.0 but would like SLIC 2.1 using HP.

Thanks

First, this is a ROMPAQ HP Bios and not Award or Phoenix...this bios requires special manual modification which cannot be done on this section of the forum....

Look at the search engines and find the Rompaq or Problematic Bios and post your request there...sorry.:(

[Busykid508]

I am reposting this request with an RW report (thanks to RW:s creator Jeff for helping me out with the access exception errors).

-Motherboard Manufacturer and Model: Fujitsu Lifebook E8210 (ATI-Graphics)
-Bios Revision: 1.23
-Bios Type: Phoenix
-Bios SLIC: unknown, suitable 2.1 wanted, for Vista And W7
-Bios Link: http://www.mediafire.com/?nyrtjdjmbwq
-Complete extracted bios diskette image: http://www.mediafire.com/?2mjgrumvynd

-Rw-everything report: http://www.mediafire.com/?tkwggmz13wx


Thanks,
/Johan

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook E8210 (for ATI-Graphics and INTEL Graphics)
-Bios revision: 1.23
-Bios Type: Phoenix BIOS
-Bios Download Link for ATI Graphics: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=F9FD9E2B-EB17-4977-B373-2D080B53BB23&FileFolder=Downloadfiles&FileTypeExtension=BUP&FileNameClient=FTS_BIOSWindowsFlash32LifebookE8210 _123_1031796.BUP&FileSize=705122&From=Pl9dUExYMVRXUD9aLV1aYl5QXRsb
-Bios Download Link for INTEL Graphics: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=4C73798B-3136-40C1-B54A-7895954EE34D&FileFolder=Downloadfiles&FileTypeExtension=BUP&FileNameClient=FTS_BIOSWindowsFlashBUPLIFEBOOKE821 0_124_1014202.BUP&FileSize=721098&From=VHVzZmJuR2ptZlVwQ3NweHRmcx0d
-Source of Bios Download Link: http://support.ts.fujitsu.com/com/support/downloads.html
-IMPORTANT: There are 2 Modified BIOS FILES Included - One is for ATI GRAPHICS and the other is for INTEL GRAPHICS - Be sure to pick the correct one that matches your computer GRAPHICS CARD.
-PH161700 (PH161700) BIOS flash tool included - FLASH BIOS in DOS using PH161700 and bootable USB flash drive - Rename ECRV124_SLIC.ROM to ECRV124.ROM and at command prompt in DOS, type PH161700 ECRV124.ROM /O /Force /X /C /S <ENTER>
-SLIC: Fujitsu[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: Fujitisu
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSV2 - TICKED Replace Existing SLIC Table ID from SLAC to FUJJ
-Modifier: Busykid508
-Please provide feedback

CRISDISK Bios Recovery Files Included

Fujitsu-Siemens_Lifebook_E8210-Fujitsu-Siemens-1.23_for_ATI-Graphics_and_INTEL_Graphics-Fujitsu[FUJ-PC-FUJ]2.1.BIN_SLIC21_Fujitsu_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_E8210-Fujitsu-Siemens-1.23.rar

[tng_fr]

Sorry, I forgot to add it to the upload...it is uploading now and is included...thanks for letting me know....

Give it a few minutes to upload to the server before downloading it.

-Manufacturer: HP
-Motherboard Model: Compaq Presario S4000NX Desktop PC (BIOS Update for GL_VE Motherboards)
-Bios revision: 3.24 (sp23989.exe)
-Bios Type: PHOENIX BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software2/COL4578/pv-15624-1/sp23989.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-15624-1&lc=en&dlc=en&cc=us&lang=en&os=228&product=329399
-Winflash Bios Update Tools Included - However, I strongly suggest to FLASH BIOS in DOS using PHLASH17 (PH161700) on bootable USB Flash Drive - Rename BIOS_SLIC.WPH to BIOS.WPH and at command prompt in DOS, type: ph161700 /x bios.wph <ENTER>
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: PHOENIX Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

HP_Compaq_Presario_S4000NX_Desktop_PC_BIOS_Update_ for_GL_VE_Motherboards-HP_Compaq-3.24_sp23989.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Compaq_Presario_S4000NX_Desktop_PC.rar

Worked perfect! Thanks!

[Busykid508]

FOR alextheg

-Manufacturer: HP
-Motherboard Model: Pavilion Elite m9090.ch Desktop PC (IPIBL-LA Motherboard BIOS Update)
-Bios revision: 5.13 (sp37377.exe)
-Bios Type: AMI BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softlib/software10/COL23200/pv-60387-1/sp37377.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-60387-1&lc=en&dlc=en&cc=us&product=3643509&os=2100&lang=en
-AFUWIN Bios Update Tool Included - However, I suggest using the AFUWIN bios flash utility that is located in AMIFLASH Folder. Choose either the 32 bit or 64 bit which fits your machine. Rename 513_SLIC.ROM to 513.ROM before flashing bios.
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: AMI Mod Tool v1.43
-Method: SSV2 - TICKED Ignore Checksum and Module 80h warnings - Ticked Don't Alter ACPI Tables
-Modifier: Busykid508
-Please provide feedback

HP_Pavilion_Elite_m9090.ch_Desktop_PC_IPIBL-LA_Motherboard_BIOS_Update-HP-5.13_sp37377.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org/Hewlett Packard/HP_Pavilion_Elite_m9090.ch_Desktop_PC.rar

[Busykid508]

Worked perfect! Thanks!

Thank you....enjoy...:):D

[Cwelle]

This is your bios and motherboard though the name of the computer is not yours.

-Manufacturer: HP
-Motherboard Model: Pavilion dv6500 CTO Entertainment Notebook PC (Intel Processor Edition)
-Bios revision: F.59A (sp42153.exe)
-Bios Type: Award BIOS
-Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp42001-42500/sp42153.exe
-Source of Bios Download Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67682-1&lc=en&dlc=en&cc=us&product=3380544&os=2100&lang=en
-Winflash Bios Update Tool Included - However, I strongly recommend to use PHLASH17 (PH161700) on bootable USB Flash Drive. Rename 30CCF59_SLIC.WHP to BIOS.WPH and At command prompt in DOS, type ph161700 /x bios.wph
-SLIC: HP 2.1
-SLP: HP
-HP Certificate Included
-Tool: Award Mod Tool v0.32
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

HP_Pavilion_dv6500_CTO_Entertainment_Notebook_PC_I NTEL_Processor_EDTION-HP-F.59A_sp42153.exe-HP_SLIC21_HP_SLP
http://slics.myftp.org//Hewlett Packard/HP_Pavilion_dv6500_CTO_Entertainment_Notebook_PC.r ar

Working OK. :)
I used windows flash tool WinPhlash64.exe.

Thanks

[Busykid508]

Working OK. :)
I used windows flash tool WinPhlash64.exe.

Thanks

Thanks and glad it worked for you...:):D

[jse]

-Manufacturer: Fujitsu-Siemens
-Motherboard Model: Lifebook E8210 (for ATI-Graphics and INTEL Graphics)
-Bios revision: 1.23
-Bios Type: Phoenix BIOS
-Bios Download Link for ATI Graphics: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=F9FD9E2B-EB17-4977-B373-2D080B53BB23&FileFolder=Downloadfiles&FileTypeExtension=BUP&FileNameClient=FTS_BIOSWindowsFlash32LifebookE8210 _123_1031796.BUP&FileSize=705122&From=Pl9dUExYMVRXUD9aLV1aYl5QXRsb
-Bios Download Link for INTEL Graphics: http://webdownload.ts.fujitsu.com/download/FileDownload/fileDownload.aspx?SoftwareGUID=4C73798B-3136-40C1-B54A-7895954EE34D&FileFolder=Downloadfiles&FileTypeExtension=BUP&FileNameClient=FTS_BIOSWindowsFlashBUPLIFEBOOKE821 0_124_1014202.BUP&FileSize=721098&From=VHVzZmJuR2ptZlVwQ3NweHRmcx0d
-Source of Bios Download Link: http://support.ts.fujitsu.com/com/support/downloads.html
-IMPORTANT: There are 2 Modified BIOS FILES Included - One is for ATI GRAPHICS and the other is for INTEL GRAPHICS - Be sure to pick the correct one that matches your computer GRAPHICS CARD.
-PH161700 (PH161700) BIOS flash tool included - FLASH BIOS in DOS using PH161700 and bootable USB flash drive - Rename ECRV124_SLIC.ROM to ECRV124.ROM and at command prompt in DOS, type PH161700 ECRV124.ROM /O /Force /X /C /S <ENTER>
-SLIC: Fujitsu[FUJ-PC-FUJ]2.1.BIN 2.1
-SLP: Fujitisu
-FUJITSU Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSV2 - TICKED Replace Existing SLIC Table ID from SLAC to FUJJ
-Modifier: Busykid508
-Please provide feedback

CRISDISK Bios Recovery Files Included

Fujitsu-Siemens_Lifebook_E8210-Fujitsu-Siemens-1.23_for_ATI-Graphics_and_INTEL_Graphics-Fujitsu[FUJ-PC-FUJ]2.1.BIN_SLIC21_Fujitsu_SLP
http://slics.myftp.org//Fujitsu Siemens/Fujitsu-Siemens_Lifebook_E8210-Fujitsu-Siemens-1.23.rar

Thank you,

ATI version tested and working with Vista, W7 not tested yet.
Flashed with USB stick version of original floppy image (PHLASH+PLATFORM.BIN).

RW AcpiTables after mod: http://www.mediafire.com/?jnyljhgizdm

Great job:)
/Johan

[Busykid508]

Thank you,

ATI version tested and working with Vista, W7 not tested yet.
Flashed with USB stick version of original floppy image (PHLASH+PLATFORM.BIN).

RW AcpiTables after mod: http://www.mediafire.com/?jnyljhgizdm

Great job:)
/Johan

It makes me very happy for you and congrats...:):D

[ohio]

Hi,

Please Mod to 2.1

-Motherboard Manufacturer and Model: Toshiba Satellite U405-S2830
-Bios Revision: 4.0
-Bios Type: Phoenix
-Bios SLIC: 2.0
-Original Bios Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/su40v400.exe

Thanks.

[Busykid508]

Hi,

Please Mod to 2.1

-Motherboard Manufacturer and Model: Toshiba Satellite U405-S2830
-Bios Revision: 4.0
-Bios Type: Phoenix
-Bios SLIC: 2.0
-Original Bios Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/su40v400.exe

Thanks.

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite U405-S2830
-Bios revision: 4.0
-Bios Type: Phoneix BIOS
-Bios Download Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/su40v400.exe
-WINFLASH Bios Update ToolS Included - However, I strongly suggest flashing bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive - Rename TE1S400_SLIC.WPH to TE1S400.WPH and at command prompt in DOS, type: ph161700 te1s400.wph /x /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

TOSHIBA_Satelite_U405-S2830-TOSHIBA-4.0-Toshiba[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satelite_U405-S2830-TOSHIBA-4.0.rar

[SANDERSON]

Hi Busykid508,

hope it's possible to mod this bios to 2.1:



-Motherboard Manufacturer and Model: Tyan Tempest i5400XT (S5396)
-Bios Revision: 1.3
-Bios Type: Phoenix
-Bios SLIC: none (?)
-Original Bios Link: ftp://ftp.tyan.com/bios/S5396_v103.zip


Thank you,

Sabrina

[Busykid508]

Hi Busykid508,

hope it's possible to mod this bios to 2.1:



-Motherboard Manufacturer and Model: Tyan Tempest i5400XT (S5396)
-Bios Revision: 1.3
-Bios Type: Phoenix
-Bios SLIC: none (?)
-Original Bios Link: ftp://ftp.tyan.com/bios/S5396_v103.zip


Thank you,

Sabrina

-Manufacturer: TYAN
-Motherboard Model: Tempest i5400XT (S5396)
-Bios revision: 1.3
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.tyan.com/bios/S5396_v103.zip
-PHLASH16 Bios Udate Tool Included - flash bios in DOS using PHLASH16 on bootable USB Flash Drive - Rename Modified Bios File 5396v103_SLIC.WPH to 5396v103.WPH and at commad prompt in DOS, type: Phlash16 5396v103.WPH /mode=3 <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2,1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSV2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

TYAN_Tempest_i5400XT_S5396-TYAN-1.3-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Tyan/TYAN_Tempest_i5400XT_S5396-TYAN-1.3.rar

[stryfe2010]

Dell Vostro 410 - SLIC 2.1 Request

--------------------------------------------------------------------------------

-Motherboard Manufacturer and Model ell Inc. 0J584C
-Bios Revision :1.0.3
-Bios Type :Phoenix Award
-Bios SLIC : 2.0
-Bios Link : ftp.us.dell.com/bios/v410-103.exe

is it possible to add slic 2.1?

[Busykid508]

Dell Vostro 410 - SLIC 2.1 Request

--------------------------------------------------------------------------------

-Motherboard Manufacturer and Model ell Inc. 0J584C
-Bios Revision :1.0.3
-Bios Type :Phoenix Award
-Bios SLIC : 2.0
-Bios Link : ftp.us.dell.com/bios/v410-103.exe

is it possible to add slic 2.1?

Also, the link to the download does not work and if this is a DELL Phoenix Bios, we may not be able to modify it here.

You must provide an RW everything report...that is required

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/q8g7ga
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[ciscokid]

-Manufacturer: ACER
-Motherboard Model: TravelMate 4202wlmi
-Bios revision: 3.10
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.work.acer-euro.com/notebook/travelmate_4200/vista/BIOS/BIOS.zip
-Winflash and PHLASH17 (PH161700) DOS Bios Update Tools Included - I strongly suggest flashing bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive - Rename BL50310A_SLIC.WPH to BL50310A.WPH and at command prompt in DOS, type: ph161700 BL50310A.WPH /mode=3 /x <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

ACER_Travelmat_4202wlmi-Acer-3.10-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Acer/ACER_Travelmat_4202wlmi-Acer-3.10.rar
Report: Windows 7 Activated!!! :)

Thanks, Busykid508, you provide an excellent service here. ;)

[Busykid508]

Report: Windows 7 Activated!!! :)

Thanks, Busykid508, you provide an excellent service here. ;)

Thank you and enjoy...:):D

[KillerJupe]

I don't blame you and I repackaged the file and you can download it from the link below


-Manufacturer: SONY
-Motherboard Model: VAIO CR vgn-cr353
-Bios revision: R2101Q0
-Bios Type: Phoenix BIOS
-Bios Download Link: http://www.fileshost.com/download.php?id=EB5B41891
-Winflash and PHLASH17 (PH161700.EXE) Bios Update Tool Included - FLASH BIOS IN DOS using PH161700.exe on a bootable USB Flash Drive - Rename R2101Q0_SLIC.ROM to R2101Q0.ROM and at command prompt, type: PH161700.EXE /x /mode=3 /force R2101Q0.ROM <ENTER>
-SLIC: TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.031
-Method: Dynamic - Ticked ONLY Replace SLIC Elements in RW Everything Report
-Modifier: BUSYKID508
-Please provide feedback

CRISDISK Is Included for Bios Recovery


SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0-TOSHIBA[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//SONY_VAIO_CR_VGN_CR460F-SONY-R2101Q0.rar

Works great, thanks!

[Busykid508]

Works great, thanks!

Thanks and it good to hear this news...:):D

[ohio]

-Manufacturer: TOSHIBA
-Motherboard Model: Satellite U405-S2830
-Bios revision: 4.0
-Bios Type: Phoneix BIOS
-Bios Download Link: http://cdgenp01.csd.toshiba.com/content/support/downloads/su40v400.exe
-WINFLASH Bios Update ToolS Included - However, I strongly suggest flashing bios in DOS using PHLASH17 (PH161700) on a bootable USB Flash Drive - Rename TE1S400_SLIC.WPH to TE1S400.WPH and at command prompt in DOS, type: ph161700 te1s400.wph /x /mode=3 /pn <ENTER>
-SLIC: Toshiba[TOSINVTOSINV00-INV]2.1.BIN 2.1
-SLP: TOSHIBA
-TOSINVTOSINV00-INV Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK BIOS RECOVERY FILES INCLUDED

TOSHIBA_Satelite_U405-S2830-TOSHIBA-4.0-Toshiba[TOSINVTOSINV00-INV]2.1.BIN_SLIC21_TOSHIBA_SLP
http://slics.myftp.org//Toshiba/TOSHIBA_Satelite_U405-S2830-TOSHIBA-4.0.rar

I can see the 2.1 spec in RW-Everything!

Thanks!

[kels]

-Motherboard Manufacturer: MSI
-Motherboard Model: MS 7156(865PE-V2)
-Bios Revision :6.0
-Bios Type :Phoenix
-Bios SLIC : None
-Bios Link : http://download1.msi.com/files/downloads/bos_exe/7156v52.zip

need to activate win7, is it possible to add in slic2.1?

Thank You.

[911medic]

-Motherboard Manufacturer: MSI
-Motherboard Model: MS 7156(865PE-V2)
-Bios Revision :6.0
-Bios Type :Phoenix
-Bios SLIC : None
-Bios Link : http://download1.msi.com/files/downloads/bos_exe/7156v52.zip

need to activate win7, is it possible to add in slic2.1?

Thank You.

This is not phoenix. It is award. Very different animal

MSI SLIC 2.1 = http://slics.myftp.org/Msi/MSI_7156v52_MSI_SLIC2.1_SSv3.rar

Flash from DOS with included tool. Clear cmos and load defaults after flash.

Feedback please!!

[kels]

This is not phoenix. It is award. Very different animal

MSI SLIC 2.1 = http://slics.myftp.org/Msi/MSI_7156v52_MSI_SLIC2.1_SSv3.rar

Flash from DOS with included tool. Clear cmos and load defaults after flash.

Feedback please!!

sry, my bad! i try to see in RW-everything, it just write they phoenix ><

thanks, once i flash i will give my feedback.

[Busykid508]

Please mod to SLIC 2.1 for Win 7

-Motherboard Manufacturer and Model : Acer TravelMate 3290
-Bios Revision : 1.28
-Bios Type : Phoenix
-Bios SLIC : Need 2.1
-Bios Link : Link (http://global-download.acer.com/GDFiles%5CBIOS/BIOS/BIOS_v1.28.zip?acerid=633643232544691506&Step1=Notebook&Step2=TravelMate&Step3=TravelMate%203290&OS=V10&LC=en&SC=AAP_6)

If you cannot provide a RW Everything report like is required according to the rules, you do not get your mod

How to make a RW Everything Report

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/q8g7ga
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

[RtOaNn]

If you cannot provide a RW Everything report like is required according to the rules, you do not get your mod

I'm so sorry that I missed out the RW-Everything report as I do not have access to the target computer right now.

I'll update my post again with the required RW-Everything report.

[DavidO]

You will not get a mod until you provide us the RW Everything Report which is posted as a prerequisite before we mod your bios

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/g8iy0e
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this to the desktop and upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

Then send the link to us or attach the file to your post.

Ok here you go. Sorry, but the link to RW-Everything was broken in the first post.

[SANDERSON]

-Manufacturer: TYAN
-Motherboard Model: Tempest i5400XT (S5396)
-Bios revision: 1.3
-Bios Type: Phoenix BIOS
-Bios Download Link: ftp://ftp.tyan.com/bios/S5396_v103.zip
-PHLASH16 Bios Udate Tool Included - flash bios in DOS using PHLASH16 on bootable USB Flash Drive - Rename Modified Bios File 5396v103_SLIC.WPH to 5396v103.WPH and at commad prompt in DOS, type: Phlash16 5396v103.WPH /mode=3 <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2,1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: SSV2 - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

TYAN_Tempest_i5400XT_S5396-TYAN-1.3-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//Tyan/TYAN_Tempest_i5400XT_S5396-TYAN-1.3.rar

Works perfect! Many thanks for the foolproof instructions!

[kels]

This is not phoenix. It is award. Very different animal

MSI SLIC 2.1 = http://slics.myftp.org/Msi/MSI_7156v52_MSI_SLIC2.1_SSv3.rar

Flash from DOS with included tool. Clear cmos and load defaults after flash.

Feedback please!!

SUPER PERFECT!

Work without any problem! Billion Thanks:D

[Busykid508]

Works perfect! Many thanks for the foolproof instructions!

thank you...:):D

[renezh]

Hi, ist that possible?

Motherboard Manufacturer and Model : Shuttle XPC SB61G2 V3
Bios Revision : S30T
Bios Type : Phoenix-Award Bios v6.00 PG
Bios SLIC : Dell or HP for Win7
Bios Link : http://image.shuttle.com/ResourceCenter/download_file.jsp?file_id=10211


Thanks and regards

rene

[Busykid508]

Hi, ist that possible?

Motherboard Manufacturer and Model : Shuttle XPC SB61G2 V3
Bios Revision : S30T
Bios Type : Phoenix-Award Bios v6.00 PG
Bios SLIC : Dell or HP for Win7
Bios Link : http://image.shuttle.com/ResourceCenter/download_file.jsp?file_id=10211


Thanks and regards

rene

You are in the wrong forum....this belongs to the Award and AMI Mod Request forum....post this information here: http://forums.mydigitallife.info/showthread.php?t=5863

[Busykid508]

Ok here you go. Sorry, but the link to RW-Everything was broken in the first post.

911medic modified your bios and you can find it here: http://forums.mydigitallife.info/showthread.php?p=134291#post134291

[Busykid508]

I can see the 2.1 spec in RW-Everything!

Thanks!

Thank you for letting us know...:):D

[OtakuCIS]

Request for SLIC 2.1 bios mod

-Motherboard Manufacturer and Model : Acer Aspire 5738Z/ZG
-Bios Revision : 1.13
-Bios Type : Phoenix
-Bios SLIC : 2.0
-Bios Link : Link (http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.13_A_A.zip?acerid=633857559775941558&Step1=Notebook&Step2=Aspire&Step3=Aspire 5738ZG&OS=V10&LC=de&SC=EMEA_8)
-Rw-everything report : Link (http://www.sendspace.com/file/q4dzze)

[koenigs]

-Manufacturer: LG
-Motherboard Model: P1-J755R
-Bios revision: RKYWSF33
-Bios Type: Phoenix BIOS
-Bios Download Link: http://rapidshare.com/files/271907011/LG_RKYWSF33.RAR.html
-PHLASH17 (PH161700) Bios Update Tool Included. Rename RKYWSF33_SLIC.BIN to RKYWSF33.BIN and at command prompt, type: ph161700 /x /force RKYWSF33.bin
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.030
-Method: SSV2 - Ticked Replace All SLICS in RW Everything Report
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

LG_P1-J755R-LG-RKYWSF33-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org//LG_P1-J755R-LG-RKYWSF33.rar

This version work. Big thanks.
RW-Everything report after flashing: http://rapidshare.com/files/276831397/AcpiTbls_LG_RKYWSF33_Acer_2.1_Slic.rw.html

[lon_tokyo]

Manufacturer: Foxconn
Model: P4M8907MB-2.0 Series
BIOS Type: DDR2 SDRAM
BIOS Link: http://www.foxconnchannel.com/support/downloads.aspx

[Busykid508]

Request for SLIC 2.1 bios mod

-Motherboard Manufacturer and Model : Acer Aspire 5738Z/ZG
-Bios Revision : 1.13
-Bios Type : Phoenix
-Bios SLIC : 2.0
-Bios Link : Link (http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.13_A_A.zip?acerid=633857559775941558&Step1=Notebook&Step2=Aspire&Step3=Aspire 5738ZG&OS=V10&LC=de&SC=EMEA_8)
-Rw-everything report : Link (http://www.sendspace.com/file/q4dzze)

-Manufacturer: ACER
-Motherboard Model: Aspire 5738Z/ZG
-Bios revision: 1.13
-Bios Type: Phoenix BIOS
-Bios Download Link: http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.13_A_A.zip?acerid=633857559775941558&Step1=Notebook&Step2=Aspire&Step3=Aspire%205738ZG&OS=V10&LC=de&SC=EMEA_8
-Winflash and PHLASH16 DOS Bios Update Tools Included - You have 2 different ways of flashing the bios - One way is to use WINFLASH 32 Bit or 64 Bit - If you use Winflash, Rename JV50113_SLIC.EXE to JV50113.EXE and double click on it to begin flashing the BIOS and follow on-screen instructions. If you choose to flash your bios in DOS, use PHLASH16 on a bootable USB Flash Drive - Rename JV50113_SLIC.WPH to JV50113.WPH and at command prompt in DOS, type: phlash16 /x /s /c /mode=3 JV50113.WPH <ENTER>
-SLIC: Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN 2.1
-SLP: ACER
-ACER_2.1 Certificate Included
-Tool: Phoenix Mod Tool v0.033
-Method: Dynamic - Default Settings
-Modifier: Busykid508
-Please provide feedback

CRISDISK Is Included for Bios Recovery

ACER_Aspire_5738Z_ZG-ACER-1.13-Acer[ACRSYSACRPRDCT-ANNI]2.1.BIN_SLIC21_ACER_SLP
http://slics.myftp.org/Acer/ACER_Aspire_5738Z_ZG-ACER-1.13.rar

[Busykid508]

Manufacturer: Foxconn
Model: P4M8907MB-2.0 Series
BIOS Type: DDR2 SDRAM
BIOS Link: http://www.foxconnchannel.com/support/downloads.aspx

You are in the wrong forum...this is an Award Bios and you need to post it here: http://forums.mydigitallife.info/showthread.php?t=5863

[Busykid508]

This version work. Big thanks.
RW-Everything report after flashing: http://rapidshare.com/files/276831397/AcpiTbls_LG_RKYWSF33_Acer_2.1_Slic.rw.html

thank you for letting us know...:):D

[Busykid508]

Before You Post Your Mod Request, You MUST Do the Following Below Or Else You Will Not Receive Your Mod.




HOW TO CREATE AN RW EVERYTHING REPORT:

First and FOREMOST - DO NOT RENAME THIS FILE AT ALL - When it saves it will save to a DEFAULT NAME. LEAVE THAT NAME ALONE and DO NOT TOUCH IT or CHANGE THE NAME. If you do rename the file, I will put you on the backburner or at the end of the line for your request.

Download and Install RWEverything from one of the following links:
http://www.sendspace.com/file/q8g7ga
http://slics.myftp.org//RwV1.3.zip

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to your post or upload it to one of the following:
www.box.net or www.mediafire.com or www.sendspace.com

If you upload your RWEverything Report to one of the 3 host servers above, post the download link to your RWEverthing Report in the Post of your Mod Request.

Below is the preferred method in which to post your mod requests:

-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type: Phoenix BIOS
-Bios Download Link:
-RW Everything Report Download Link:

[ndtemple417]

hey busykid man thanks for all your help but i can't find the modded .wph also i don't know where to look for which one my bios uses i found the temp folder but i don't know how to tell which image it is using thanks again for all your help